1967 Mustang Coupe Build (Electra) - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JRANGER · 03-07-2014, 10:18 AM

here is the console all fitted

**Dieselwrencher** · 03-07-2014, 11:08 AM

That looks like it was meant for it. What year range miata is it from?

JRANGER · 03-07-2014, 11:42 AM

Quote:

Originally Posted by dieselwrencher

that looks like it was meant for it. What year range miata is it from?

1990 - 1997

JRANGER · 03-07-2014, 01:08 PM

I am never satisfied...Just swiped a pair of 05 Black cloth seats of CL. Going to pick them up tonight lol

flashed · 03-07-2014, 06:18 PM

You have made a lot of progress while I wasnt paying attention .

Rusbuilt · 03-07-2014, 09:56 PM

That console looks great Jeff! Looking forward to seeing this ride in person tomorrow!!

JRANGER · 03-08-2014, 09:04 PM

Toying with ideas:

Which do you guys like

Rusbuilt · 03-08-2014, 09:06 PM

Last one! Maybe a flat red though

JRANGER · 03-08-2014, 09:19 PM

yeah it will be flat/satin

Kerry P · 03-08-2014, 09:27 PM

I like the Mach 1 version.

67ChevyRedneck · 03-09-2014, 12:21 AM

I don't know why, but I'm really diggin the 1st one.

If I did the 2nd one, I'd add the lower GT style stripe in red too.

JRANGER · 03-10-2014, 11:33 AM

Im leaning towards the rally stripes......

Got tracks on the 05 Passenger seat and drilled out the holes for the drivers side. Also the passenger side is leaking. I must of cut the hose because goop is leaking out the bootom so hopefully that stops soon lol

Sat I adjusted the throttle bar as it was to tight and wouldnt let the car idle correctly. Now it idles near 5/600 RPM. I also zip tied the fuel line up a little higher to get it was from the exhaust pipe, added a bolt to the driver side hanger as it some how rattled out. WTF...ugh

then i decided to get started on trying to fix the cowl leak. I thought the plastic caps would work but the drivers side is way too far gone. I am too far in to remove the cowl so i am going to just use a cowl cover and i put urethane in the holes of the wiper blades.

I plan to take then fenders off and check to see if i can access it from the side but for now it just looks like a deal breaker on fixing the cowl

So yesterday i coated the roof in sound deadener

JRANGER · 03-10-2014, 09:33 PM

Well good times....I covered the cowl, put urethane in the wiper holes. So I pour water on it and wahlah! Sealed!! Then it starts going down the fender gaps....O now its in the car again>>>>>>UGH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ok...So maybe i will take the fenders off this weekend and investigate...Not happy...I just want to be able to put the carpet in and not worry blah

motornut · 03-11-2014, 08:47 AM

two stripes....looking good

JRANGER · 03-12-2014, 04:22 PM

Well after driving it sat i also realized that other then needing an alignment the back end seem to have issues when hitting bump. Being that she is old I ordered a new set of 4.5 leaf springs and shackle kit. A new parking brake front line, a shortened shifter lever, a shifter rebuild kit, and a driver side cowl patch. I plan to take the fender off and cut the side of the cowl and try to patch it that way.

**Dieselwrencher** · 03-12-2014, 08:26 PM

I say #2 like Jesse said. With the GT stripes on the bottom. It would be something different and look cool. Sorry to hear about the cowl leaking.

JRANGER · 03-20-2014, 11:46 AM

Ordered more parts... Full tailight bezel set which are chrome with a black stripe on them. Plus new tailight lenes...$69 on ebay...Super cheap since it is normally $57 just for the bezels...

67ChevyRedneck · 03-20-2014, 02:07 PM

CJ's has the LED's on sale right now for $36 for the 65/66 cars... thinking about getting a set...

http://www.cjponyparts.com/catalog/c...20-percent-off

JRANGER · 03-20-2014, 02:12 PM

Quote:

Originally Posted by 67ChevyRedneck

CJ's has the LED's on sale right now for $36 for the 65/66 cars... thinking about getting a set...

http://www.cjponyparts.com/catalog/c...20-percent-off

very nice. Ill be going sequential eventually and there is a guy on VMF that makes them. Ill be grabbing though since they are pretty freaking awesome and have lots of changeable settings. My lights work but i just needed clean bezels and they weren't much more expensive with the lens so i went with that. LEDs would be nice though

67ChevyRedneck · 03-20-2014, 02:29 PM

Who is the VMF guy and what does he charge? Is it just an LED panel you plug in or does he injection mold them into a lens?

JRANGER · 03-20-2014, 02:32 PM

Quote:

Originally Posted by 67ChevyRedneck

Who is the VMF guy and what does he charge? Is it just an LED panel you plug in or does he injection mold them into a lens?

Led panel
https://www.youtube.com/watch?v=o5pdUKDZekc

his name is GTONavy..he charges $195

His thread
http://forums.vintage-mustang.com/vi...il-lights.html

67ChevyRedneck · 03-20-2014, 02:48 PM

OMG those are stupid bright! I sent him a PM. I want THOSE!

JRANGER · 03-22-2014, 11:20 PM

Installed my new Grab-a-trac 4.5 stand eye rear leaf springs in. It raised the rear about an inch and now drives a million times better. But i think i have i6 springs so the front rubs if i hit a bump turning too much

67ChevyRedneck · 03-22-2014, 11:39 PM

Nice rake! She's looking good. Sure you don't wanna hit up the Charlotte show???

JRANGER · 03-23-2014, 12:02 AM

haha to much to do....She leaks all over into the inside so i have to get the cowl patched, and all new window seals etc

03-07-2014, 10:18 AM	#501
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) here is the console all fitted Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-07-2014, 11:08 AM	#502
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1967 Mustang Coupe Build (Electra) That looks like it was meant for it. What year range miata is it from? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-07-2014, 01:08 PM	#504
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) I am never satisfied...Just swiped a pair of 05 Black cloth seats of CL. Going to pick them up tonight lol __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-07-2014, 06:18 PM	#505
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: 1967 Mustang Coupe Build (Electra) You have made a lot of progress while I wasnt paying attention .

03-07-2014, 09:56 PM	#506
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 1967 Mustang Coupe Build (Electra) That console looks great Jeff! Looking forward to seeing this ride in person tomorrow!! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-08-2014, 09:04 PM	#507
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Toying with ideas: Which do you guys like Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-08-2014, 09:06 PM	#508
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 1967 Mustang Coupe Build (Electra) Last one! Maybe a flat red though __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-08-2014, 09:19 PM	#509
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) yeah it will be flat/satin __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-08-2014, 09:27 PM	#510
Kerry P Registered User Join Date: Aug 2010 Location: Harrison Arkansas Posts: 164	Re: 1967 Mustang Coupe Build (Electra) I like the Mach 1 version.

03-09-2014, 12:21 AM	#511
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1967 Mustang Coupe Build (Electra) I don't know why, but I'm really diggin the 1st one. If I did the 2nd one, I'd add the lower GT style stripe in red too. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-10-2014, 11:33 AM	#512
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Im leaning towards the rally stripes...... Got tracks on the 05 Passenger seat and drilled out the holes for the drivers side. Also the passenger side is leaking. I must of cut the hose because goop is leaking out the bootom so hopefully that stops soon lol Sat I adjusted the throttle bar as it was to tight and wouldnt let the car idle correctly. Now it idles near 5/600 RPM. I also zip tied the fuel line up a little higher to get it was from the exhaust pipe, added a bolt to the driver side hanger as it some how rattled out. WTF...ugh then i decided to get started on trying to fix the cowl leak. I thought the plastic caps would work but the drivers side is way too far gone. I am too far in to remove the cowl so i am going to just use a cowl cover and i put urethane in the holes of the wiper blades. I plan to take then fenders off and check to see if i can access it from the side but for now it just looks like a deal breaker on fixing the cowl So yesterday i coated the roof in sound deadener __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper Last edited by JRANGER; 03-10-2014 at 11:56 AM.

03-10-2014, 09:33 PM	#513
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Well good times....I covered the cowl, put urethane in the wiper holes. So I pour water on it and wahlah! Sealed!! Then it starts going down the fender gaps....O now its in the car again>>>>>>UGH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ok...So maybe i will take the fenders off this weekend and investigate...Not happy...I just want to be able to put the carpet in and not worry blah __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-11-2014, 08:47 AM	#514
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: 1967 Mustang Coupe Build (Electra) two stripes....looking good __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

03-12-2014, 04:22 PM	#515
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Well after driving it sat i also realized that other then needing an alignment the back end seem to have issues when hitting bump. Being that she is old I ordered a new set of 4.5 leaf springs and shackle kit. A new parking brake front line, a shortened shifter lever, a shifter rebuild kit, and a driver side cowl patch. I plan to take the fender off and cut the side of the cowl and try to patch it that way. __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-12-2014, 08:26 PM	#516
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1967 Mustang Coupe Build (Electra) I say #2 like Jesse said. With the GT stripes on the bottom. It would be something different and look cool. Sorry to hear about the cowl leaking. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

03-20-2014, 11:46 AM	#517
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Ordered more parts... Full tailight bezel set which are chrome with a black stripe on them. Plus new tailight lenes...$69 on ebay...Super cheap since it is normally $57 just for the bezels... __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-20-2014, 02:07 PM	#518
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1967 Mustang Coupe Build (Electra) CJ's has the LED's on sale right now for $36 for the 65/66 cars... thinking about getting a set... http://www.cjponyparts.com/catalog/c...20-percent-off __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-20-2014, 02:29 PM	#520
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1967 Mustang Coupe Build (Electra) Who is the VMF guy and what does he charge? Is it just an LED panel you plug in or does he injection mold them into a lens? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-20-2014, 02:48 PM	#522
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1967 Mustang Coupe Build (Electra) OMG those are stupid bright! I sent him a PM. I want THOSE! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 03-20-2014 at 03:11 PM.

03-22-2014, 11:20 PM	#523
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Installed my new Grab-a-trac 4.5 stand eye rear leaf springs in. It raised the rear about an inch and now drives a million times better. But i think i have i6 springs so the front rubs if i hit a bump turning too much Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-22-2014, 11:39 PM	#524
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1967 Mustang Coupe Build (Electra) Nice rake! She's looking good. Sure you don't wanna hit up the Charlotte show??? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-23-2014, 12:02 AM	#525
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) haha to much to do....She leaks all over into the inside so i have to get the cowl patched, and all new window seals etc __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

Register or Log In To remove these advertisements.