198Plus build - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

198plus · 11-22-2009, 12:43 PM

I received them yesterday

Thanks Tony..........Now out to the garage for a little Sunday work.

Quote:

Originally Posted by LILRED66

Ronnie:

Looking good. I shipped the power steering pump and the engine mounting brackets on Thursday morning. You should have them on Saturday, via UPS. They are nice remanufactured items, but they are going to look like turds bolted to that motor. That thing looks very nice.

**Palf70Step** · 11-27-2009, 08:07 PM

Sounds real nice!!!

daverod · 11-27-2009, 08:17 PM

Maybe I was too late

*LILRED66* · 12-02-2009, 02:55 AM

Yes and yes on the paint and undercoating. Per the factory assembly manual, undercoating was applied up to 21" from the outside body lines toward the centerline and the backside of the sheet metal was painted the body color.

198plus · 12-02-2009, 10:19 AM

Thanks Tony......Don't guess you would have any factory pics ?????

Quote:

Originally Posted by LILRED66

Yes and yes on the paint and undercoating. Per the factory assembly manual, undercoating was applied up to 21" from the outside body lines toward the centerline and the backside of the sheet metal was painted the body color.

Alan's Classic · 12-02-2009, 10:04 PM

As most of you have probably guessed already, I'm no longer doing any work on this restoration. Don't worry there is no bad blood. The cost was getting to be more than he wanted to spend. Ronnie is shopping around for cheaper rates. We still talk from time to time. I asked him if there was anything I could do to improve the way I did things. He seems to be happy with the way I treated him. He was screwed by 2 others shops, I just wanted to restore the trust.

Good luck Ronnie on your remainder of your build.

198plus · 12-02-2009, 10:45 PM

Alan's absolutely right, he done me a great job !!!!!!!!!!!! Like he said it all boiled down to cost, not that he charged to much his rates where very reasonable at 40 an hour especially for someone of his knowledge and workmanship as y'all all know. I had to slow down on project because of money.Alan kept me updated every day with pics and documented the hours he worked every day on a spreadsheet to my e-mail.
My opinion of Alan......he's a (Class act)

Quote:

Originally Posted by Alan's Classic

As most of you have probably guessed already, I'm no longer doing any work on this restoration. Don't worry there is no bad blood. The cost was getting to be more than he wanted to spend. Ronnie is shopping around for cheaper rates. We still talk from time to time. I asked him if there was anything I could do to improve the way I did things. He seems to be happy with the way I treated him. He was screwed by 2 others shops, I just wanted to restore the trust.

Good luck Ronnie on your remainder of your build.

tiggamonsta · 12-03-2009, 08:59 AM

IMO, if Alan was only charging you $40/hour. Put the truck on hold till you can pay him to finish. I would be very suspect of anyone charging less then that and still providing the quality work. Unless you find some guy that just doesn't need the money and is doing it for fun.

*LILRED66* · 12-19-2009, 08:35 PM

Ronnie:

Your truck looks awesome with the new rims, tires & caps.

ol Curt · 12-19-2009, 09:35 PM

That is a very STRAIGHT looking truck!

Strodder · 12-21-2009, 09:26 PM

Quote:

Originally Posted by ol Curt

That is a very STRAIGHT looking truck!

198plus · 12-20-2009, 12:57 AM

Thanks Tony............

Quote:

Originally Posted by LILRED66

Ronnie:
Your truck looks awesome with the new rims, tires & caps.

Thanks Bob ...........

Quote:

Originally Posted by ol Curt

That is a very STRAIGHT looking truck!

Alan's Classic · 12-20-2009, 01:48 AM

Wheels look great!! Where did you find them at??

198plus · 12-20-2009, 01:07 PM

Thanks, Alan..........A guy out in Douglasville had just bought these wheels and tires for his truck and wanted my wheels so we done a little trade.........Thanks Craigslist

Quote:

Originally Posted by Alan's Classic

Wheels look great!! Where did you find them at??

64Fugly · 12-21-2009, 07:33 PM

Truck is looking great.

198plus · 12-22-2009, 05:33 PM

Thanks...........

Quote:

Originally Posted by 64Fugly

Truck is looking great.

Quote:

Originally Posted by Strodder

198plus · 12-23-2009, 11:37 PM

Got bored this evening and bolted the front end on my truck.

Strodder · 12-27-2009, 10:54 PM

Man I can't say it enough. That's a straight truck.

DaddyMack · 12-27-2009, 11:02 PM

Very Clean truck!!

198plus · 12-27-2009, 11:51 PM

Thanks, Just can't wait till paint.

Quote:

Originally Posted by Strodder

Man I can't say it enough. That's a straight truck.

Quote:

Originally Posted by DaddyMack

Very Clean truck!!

jgh64pkup · 12-29-2009, 05:55 PM

where do you find one of those?

198plus · 12-29-2009, 06:15 PM

I found this one........Intake just needs sandblasting

Quote:

Originally Posted by jgh64pkup

where do you find one of those?

MacAttack · 12-29-2009, 06:19 PM

Man, those intake assemblies are beautiful.

Strodder · 12-29-2009, 06:20 PM

What did you have to give for it with the full setup?

198plus · 12-29-2009, 11:02 PM

New carbs......linkage......Air cleaners.....Fuel lines......I think I stole it at 500 Dollars ????????????

Quote:

Originally Posted by Strodder

What did you have to give for it with the full setup?

11-27-2009, 08:07 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,755	Re: 198Plus build Sounds real nice!!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-27-2009, 08:17 PM	#3
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 198Plus build Maybe I was too late __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

12-02-2009, 02:55 AM	#4
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: 198Plus build Yes and yes on the paint and undercoating. Per the factory assembly manual, undercoating was applied up to 21" from the outside body lines toward the centerline and the backside of the sheet metal was painted the body color. Last edited by LILRED66; 12-02-2009 at 02:55 AM.

12-02-2009, 10:04 PM	#6
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 198Plus build As most of you have probably guessed already, I'm no longer doing any work on this restoration. Don't worry there is no bad blood. The cost was getting to be more than he wanted to spend. Ronnie is shopping around for cheaper rates. We still talk from time to time. I asked him if there was anything I could do to improve the way I did things. He seems to be happy with the way I treated him. He was screwed by 2 others shops, I just wanted to restore the trust. Good luck Ronnie on your remainder of your build. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

12-03-2009, 08:59 AM	#8
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: 198Plus build IMO, if Alan was only charging you $40/hour. Put the truck on hold till you can pay him to finish. I would be very suspect of anyone charging less then that and still providing the quality work. Unless you find some guy that just doesn't need the money and is doing it for fun.

12-19-2009, 08:35 PM	#9
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: 198Plus build Ronnie: Your truck looks awesome with the new rims, tires & caps.

12-19-2009, 09:35 PM	#10
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: 198Plus build That is a very STRAIGHT looking truck! __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down!

12-20-2009, 01:48 AM	#13
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 198Plus build Wheels look great!! Where did you find them at?? __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

12-21-2009, 07:33 PM	#15
64Fugly Registered User Join Date: Oct 2008 Location: Malta, NY Posts: 61	Re: 198Plus build Truck is looking great. __________________ 65' C10 (working on cab currently) 06' Silverado

12-23-2009, 11:37 PM	#17
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: 198Plus build Got bored this evening and bolted the front end on my truck. __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl

12-27-2009, 10:54 PM	#18
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 198Plus build Man I can't say it enough. That's a straight truck. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

12-27-2009, 11:02 PM	#19
DaddyMack Wide Eyed User Join Date: Mar 2008 Location: Las Vegas, Nevada Posts: 261	Re: 198Plus build Very Clean truck!! __________________ 1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441

12-29-2009, 05:55 PM	#21
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 198Plus build where do you find one of those? __________________ Gage 1967 C10 Shortbed Stepside

12-29-2009, 06:19 PM	#23
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: 198Plus build Man, those intake assemblies are beautiful. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

12-29-2009, 06:20 PM	#24
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 198Plus build What did you have to give for it with the full setup? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.