The 60-66 "PAYING IT FORWARD" thread! - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oem4me · 09-14-2018, 12:57 AM

Quote:

Originally Posted by 5Win

I have two hubcaps to give away. Sorry they don’t match and I don’t have a complete set of either but hopefully someone can use one or both.
I think one is a 63 c10 and the other is a 66 but I’m not sure.
Thank you

The one with a red center is 64-65. Early 70's i think on the other.

**1968k20** · 09-14-2018, 06:23 AM

Quote:

Originally Posted by 5Win

I have two hubcaps to give away. Sorry they don’t match and I don’t have a complete set of either but hopefully someone can use one or both.
I think one is a 63 c10 and the other is a 66 but I’m not sure.
Thank you

I will take the hubcaps. Shipping to 96020 please.

5Win · 09-14-2018, 07:56 AM

Quote:

Originally Posted by 1968k20

I will take the hubcaps. Shipping to 96020 please.

I will ship in the next few days. Please dm address

Casaba · 09-16-2018, 11:20 AM

Hey, I have 3 new rear bed sills, one used but good condition bed sill and one new rear bed sill for the end of the bed (for the 60-63 trucks). I no longer have a current 60-66 project so they are free to someone that can use them to save an old truck and that will come get them. I would really rather not ship them. I am located in Cedartown, GA in the Northwest GA part of the state.

PM is fine or better yet text me 678 seven 7 three 4450

Thanks

Casaba · 09-24-2018, 10:38 AM

well folks, these cross-sills are about to go to the dump. that is a shame but such is life. Nobody needs them right now

LostMy65 · 09-24-2018, 12:27 PM

I'm sorry, what are cross sills?

**jayoldschool** · 09-24-2018, 12:55 PM

The piece under the tailgate that attaches the 1/4 panels.

LostMy65 · 09-24-2018, 12:58 PM

Thanks,
Shipping would most likely be a killer.

**jayoldschool** · 09-24-2018, 01:01 PM

UPS ground should be not too bad... but... you can get those pieces brand new, cheap, from any auto body supply place.

COCONUTS · 02-04-2019, 05:57 PM

Good Afternoon

I have a pair of 1962-66 parking light bezels and a pair of 1963-66 parking light lens that are both OEM. Bezels should polish up great and lens are intact, but are original. Lens have some crazing, but it won’t cost anymore to include them in the box. Bags shown are what I bought to replace them with. OEM were much better materials that what I installed.

USPS Priority Regional A box is probably the cheapest (maybe $8) and they won’t get damaged.

LMK,

Greg

ACK · 02-04-2019, 06:37 PM

COCONUTS – I could really use a pair of parking light lenses, I'll PM you if you say they're still available. Thanks.

COCONUTS · 02-04-2019, 07:10 PM

Quote:

Originally Posted by ACK

COCONUTS – I could really use a pair of parking light lenses, I'll PM you if you say they're still available. Thanks.

The lens are intact, but they have crazing. I was thinking someone would want the bezels as they are nice. If you want them all, I already sent you my PayPal email address.

LMK

Greg

ACK · 02-04-2019, 07:30 PM

Quote:

Originally Posted by COCONUTS

The lens are intact, but they have crazing. I was thinking someone would want the bezels as they are nice. If you want them all, I already sent you my PayPal email address.

LMK

Greg

Shipping money sent for bezels and lenses. Thanks!

COCONUTS · 02-04-2019, 07:34 PM

[QUOTE=ACK;8458709]COCONUTS – I could really use a pair of parking light lenses, I'll PM you if you say they're still available. Thanks.[/QUOTE

Sean

I got your PayPal for shipping.

Package will go out in morning. I sent you tracking number
Greg

demian5 · 02-07-2019, 02:20 PM

Quote:

Originally Posted by Rpederson46

I have aset of four 15" three-clip 6 lug wheels off 66 Chevy C10 located Santa Fe NM. Also brake drums and parts that are as old as truck. I suspect that shipping is prohibitive.

I could sure use those parking brake cables.

**aerotruk63** · 02-24-2019, 05:48 PM

Dash from a truck that I got part off of. Been around for years , never noticed the cigarette lighter delete. Will ship from the U.S. No customs involved. I like this thread , kinda brings back the hobby aspect. ( foot in photo not included )

**60short** · 02-24-2019, 08:50 PM

picked up!

CousinTone · 02-27-2019, 07:46 PM

Quote:

Originally Posted by 60short

Ive got a set of 6 lug steelies - from a newer 2wd truck - but they are 16.5s - I was given these, but don't want to buy tires. Can anybody here use them?

Shipping or pickup from Santa Barbara, CA

I may be able to use them. Give me till weekend to figure out if I can drive up or figure out if we can either greyhound or Amtrack them if you’re willing. Don’t want to impose. Thanks, Tony in OC

**60short** · 02-28-2019, 12:38 AM

Hey Tony, sorry, I was just coming in to update this _ i had somebody local come pick them up already.

I will edit the post.

roll_the_dice · 05-08-2019, 11:50 AM

I have 11 (I think) plastic firewall insulation fasteners. They are hard plastic and a very hard to install. I ended up spending the $20 on the rubber ones and were easier to install...however, if you need these I have them for free. Will even ship for free if it is under $3 first class mail.

first I'll take it...get's them. Also please send me a PM with your shipping address. Thanks

These are gone. Thanks!

Bowler1 · 05-08-2019, 11:41 PM

I will take them will pm address

Bowler1 · 05-17-2019, 06:58 PM

Thanks roll__the__dice I will be using them shortly

kdad · 07-29-2019, 02:52 PM

I have a complete 4 wheel drum brake setup. Taking mine off and offering it up to anyone that wants to pick it all up. NO SHIPPING. includes drums. Shoes. Spring kits and all fasteners. Backing plates. Factory front spindles. I’ll even throw in the old cut down springs. Must pick up local in Gilroy. Ca.

loosenutz · 09-23-2019, 05:18 PM

I have 3 6 lug wheels with tires (hold air but otherwise poor shape) that were on my truck when I bought it. Would be good for rolling a project truck around or whatever. Free to pickup but not worth the cost of shipping.

oem4me · 09-24-2019, 01:03 AM

Quote:

Originally Posted by loosenutz

I have 3 6 lug wheels with tires (hold air but otherwise poor shape) that were on my truck when I bought it. Would be good for rolling a project truck around or whatever. Free to pickup but not worth the cost of shipping.

I assume 15" on the bottom one?

09-16-2018, 11:20 AM	#504
Casaba Registered User Join Date: Feb 2014 Location: Acworth GA Posts: 200	Re: The 60-66 "PAYING IT FORWARD" thread! Hey, I have 3 new rear bed sills, one used but good condition bed sill and one new rear bed sill for the end of the bed (for the 60-63 trucks). I no longer have a current 60-66 project so they are free to someone that can use them to save an old truck and that will come get them. I would really rather not ship them. I am located in Cedartown, GA in the Northwest GA part of the state. PM is fine or better yet text me 678 seven 7 three 4450 Thanks

09-24-2018, 10:38 AM	#505
Casaba Registered User Join Date: Feb 2014 Location: Acworth GA Posts: 200	Re: The 60-66 "PAYING IT FORWARD" thread! well folks, these cross-sills are about to go to the dump. that is a shame but such is life. Nobody needs them right now

09-24-2018, 12:27 PM	#506
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: The 60-66 "PAYING IT FORWARD" thread! I'm sorry, what are cross sills? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-24-2018, 12:55 PM	#507
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,169	Re: The 60-66 "PAYING IT FORWARD" thread! The piece under the tailgate that attaches the 1/4 panels.

09-24-2018, 12:58 PM	#508
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: The 60-66 "PAYING IT FORWARD" thread! Thanks, Shipping would most likely be a killer. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-24-2018, 01:01 PM	#509
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,169	Re: The 60-66 "PAYING IT FORWARD" thread! UPS ground should be not too bad... but... you can get those pieces brand new, cheap, from any auto body supply place.

02-04-2019, 05:57 PM	#510
COCONUTS Registered User Join Date: Aug 2018 Location: Sunrise Beach, Missouri Posts: 100	Re: The 60-66 "PAYING IT FORWARD" thread! Good Afternoon I have a pair of 1962-66 parking light bezels and a pair of 1963-66 parking light lens that are both OEM. Bezels should polish up great and lens are intact, but are original. Lens have some crazing, but it won’t cost anymore to include them in the box. Bags shown are what I bought to replace them with. OEM were much better materials that what I installed. USPS Priority Regional A box is probably the cheapest (maybe $8) and they won’t get damaged. LMK, Greg Attached Images

02-04-2019, 06:37 PM	#511
ACK Registered User Join Date: Oct 2012 Location: Philly, PA Posts: 540	Re: The 60-66 "PAYING IT FORWARD" thread! COCONUTS – I could really use a pair of parking light lenses, I'll PM you if you say they're still available. Thanks. __________________ My truck ain't dead, it just smells funny.

02-04-2019, 07:34 PM	#514
COCONUTS Registered User Join Date: Aug 2018 Location: Sunrise Beach, Missouri Posts: 100	Re: The 60-66 "PAYING IT FORWARD" thread! [QUOTE=ACK;8458709]COCONUTS – I could really use a pair of parking light lenses, I'll PM you if you say they're still available. Thanks.[/QUOTE Sean I got your PayPal for shipping. Package will go out in morning. I sent you tracking number Greg Last edited by COCONUTS; 02-04-2019 at 07:46 PM.

02-24-2019, 05:48 PM	#516
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: The 60-66 "PAYING IT FORWARD" thread! Dash from a truck that I got part off of. Been around for years , never noticed the cigarette lighter delete. Will ship from the U.S. No customs involved. I like this thread , kinda brings back the hobby aspect. ( foot in photo not included ) __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-24-2019, 08:50 PM	#517
60short Revitalizing a 6T C10 Join Date: Aug 2017 Location: Santa Barbara, CA Posts: 222	Re: The 60-66 "PAYING IT FORWARD" thread! picked up! Last edited by 60short; 02-28-2019 at 12:38 AM.

02-28-2019, 12:38 AM	#519
60short Revitalizing a 6T C10 Join Date: Aug 2017 Location: Santa Barbara, CA Posts: 222	Re: The 60-66 "PAYING IT FORWARD" thread! Hey Tony, sorry, I was just coming in to update this _ i had somebody local come pick them up already. I will edit the post.

05-08-2019, 11:50 AM	#520
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: The 60-66 "PAYING IT FORWARD" thread! I have 11 (I think) plastic firewall insulation fasteners. They are hard plastic and a very hard to install. I ended up spending the $20 on the rubber ones and were easier to install...however, if you need these I have them for free. Will even ship for free if it is under $3 first class mail. first I'll take it...get's them. Also please send me a PM with your shipping address. Thanks These are gone. Thanks! Attached Images __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck Last edited by roll_the_dice; 05-09-2019 at 09:15 AM.

05-08-2019, 11:41 PM	#521
Bowler1 Registered User Join Date: Apr 2017 Location: Brownwood, Texas Posts: 55	Re: The 60-66 "PAYING IT FORWARD" thread! I will take them will pm address

05-17-2019, 06:58 PM	#522
Bowler1 Registered User Join Date: Apr 2017 Location: Brownwood, Texas Posts: 55	Re: The 60-66 "PAYING IT FORWARD" thread! Thanks roll__the__dice I will be using them shortly



Register or Log In To remove these advertisements.

07-29-2019, 02:52 PM	#523
kdad Registered User Join Date: Jul 2018 Location: Hollister, California Posts: 230	Re: The 60-66 "PAYING IT FORWARD" thread! I have a complete 4 wheel drum brake setup. Taking mine off and offering it up to anyone that wants to pick it all up. NO SHIPPING. includes drums. Shoes. Spring kits and all fasteners. Backing plates. Factory front spindles. I’ll even throw in the old cut down springs. Must pick up local in Gilroy. Ca. __________________ Check out my build here http://67-72chevytrucks.com/vboard/s...d.php?t=768039 She may not be the prom queen but at least she puts out..

09-23-2019, 05:18 PM	#524
loosenutz Registered User Join Date: Jul 2019 Location: San Diego Posts: 73	Re: The 60-66 "PAYING IT FORWARD" thread! I have 3 6 lug wheels with tires (hold air but otherwise poor shape) that were on my truck when I bought it. Would be good for rolling a project truck around or whatever. Free to pickup but not worth the cost of shipping. Attached Images __________________ 1966 C10 SWB BBW LM4 4L60E Build 1966 Pro Touring Chevy II Build Last edited by loosenutz; 09-23-2019 at 05:23 PM.

Register or Log In To remove these advertisements.