How about some pics of Static dropped 60-66

[glos55]

64

[Mr Pops]

Originally Posted by glos55

64

I thought 66 was the only year for reverse lights?

[LostMy65]

Originally Posted by Mr Pops

I thought 66 was the only year for reverse lights?

They became stock in 66.
But you could order many options for earlier years.
.
Many guys still add them today.
That may be the case here with his truck.

[Mr Pops]

Originally Posted by LostMy65

They became stock in 66.
But you could order many options for earlier years.
.
Many guys still add them today.
That may be the case here with his truck.

Oh interesting

[glos55]

Originally Posted by LostMy65

They became stock in 66.
But you could order many options for earlier years.
.
Many guys still add them today.
That may be the case here with his truck.

Yes they were an option in 64 and became standard equip. in 66

[Desert.Chevy]

What stock steels do you guys run with that have front Disc brakes?

I'm going for a stock look but lowered.

Thanks.

[Rickey-Lee]

these wheels are 15x8" Camper Specials with 225/75-15 tires 21/2' drop spindles with 2'dropped springs and 5' dropped springs in back

[Rickey-Lee]

I had the same problem Desert.Chevy. I found some 15" "Camper Specials" They are stock for our trucks so they use the hubcaps and there 8'' wide with an offset that will accommodate the disc brakes. I haven't figured out how to post a picture on here but you can check it out on the 60-66 chevy.com Facebook pagehttps://www.facebook.com/groups/191006017617783/ or my personnel https://www.facebook.com/rickeylee.rogers

[DexterDog]

Originally Posted by Desert.Chevy

Cool Truck, what is your lowering info?



Great stance, what is your lowering and tire info?


This is for anyone that can answer it. Anyone with 2/4 drop or more could you tell me your mesurement from flat ground to fender lip.

Thanks in advance.

Thank you, it's a 3 inch drop front and just TJ springs in the rear right now. Drop spindles and bags planned for summer.

[glos55]

Springs only

[jmack91z28]

Originally Posted by glos55

Springs only

Nice truck. How bad rusted are the floor pans?

[glos55]

Originally Posted by jmack91z28

Nice truck. How bad rusted are the floor pans?

Thank-you!! The floors are nice. The pass side rocker is the worst. As soon as this crazy weather changes I have plans to replace both rockers. I like this 64 because it's a factory air truck. Check out my post (Lucky Find)

[jmack91z28]

Originally Posted by glos55

Thank-you!! The floors are nice. The pass side rocker is the worst. As soon as this crazy weather changes I have plans to replace both rockers. I like this 64 because it's a factory air truck. Check out my post (Lucky Find)

That thing is perfect. Fix the rockers and leave everything else alone. I love it. I wish mine didn't have spots of new primer paint on it and a primer door or I'd do the same as yours.

[LostMy65]

Originally Posted by jmack91z28

That thing is perfect. Fix the rockers and leave everything else alone. I love it.

I agree.
In fact, I wouldn't replace the whole rocker.
I would do something far less intrusive and just patch the rot.

[RatRide]

New member. Just bought my 63' a month ago. I thought this should be my first post considering this was my first mod.
CCP kit -springs, shocks & swaybars
Front- 3' lowing springs with 1/2 coil cut, so it's probably 4' total
Rear- 4' lowering springs with 2' drop blocks, 6' total

[jmack91z28]

Originally Posted by LostMy65

I agree.
In fact, I wouldn't replace the whole rocker.
I would do something far less intrusive and just patch the rot.

That's actually a really good idea, I'll have to consider that for mine.

Welcome to the board ratride, that's a beautiful truck. Is that freshly restored?

[likaroc13]

Originally Posted by RatRide

New member. Just bought my 63' a month ago. I thought this should be my first post considering this was my first mod.
CCP kit -springs, shocks & swaybars
Front- 3' lowing springs with 1/2 coil cut, so it's probably 4' total
Rear- 4' lowering springs with 2' drop blocks, 6' total

Welcome aboard, & nice truck! Although I must say it appears to be a '65 instead of '63.

[RatRide]

Yes 65'.

[tjabv2]

Nice truck RatRide....I like the stance.

[Red65C10]

We're having a truck meet here in GA this Saturday the 15th. If you're close enough come on out. Detail here.

http://67-72chevytrucks.com/vboard/s...d.php?t=611832

[RatRide]

Originally Posted by tjabv2

Nice truck RatRide....I like the stance.

Thanks! With out cutting the front drop springs it sat perfectly level. But with the round wheel wheels, visually it appeared to be lower in the rear. By cutting a half coil, it dropped about an inch, giving it just a little bit of rake. I my opnion it was well worth the extra effort.

[glos55]

Very Nice RatRide!!!!!

[glos55]

Originally Posted by LostMy65

I agree.
In fact, I wouldn't replace the whole rocker.
I would do something far less intrusive and just patch the rot.

Hmmmmmmmmmm.

[Desert.Chevy]

Originally Posted by RatRide

New member. Just bought my 63' a month ago. I thought this should be my first post considering this was my first mod.
CCP kit -springs, shocks & swaybars
Front- 3' lowing springs with 1/2 coil cut, so it's probably 4' total
Rear- 4' lowering springs with 2' drop blocks, 6' total


[/IMG][/URL]

How does the truck ride after being lowered?

How much suspension travel do you have in the rear being that low?

Thanks.

[RatRide]

Thanks!!!
It was restored about 2-3 years ago. Not show quality but excellent daily driver quality, with the major stuff like motor&trans and body&paint already being done. I like wrenching, and can do bolt on parts but when it comes to the major stuff I'll pay a perfessional.

In my opinion the springs have a perfect spring rate. Not too stiff, but stiff enough, along with the sway bars to give good corner handling. The shocks that came in the kit aren't very good though. The front tends to have a floaty bounce. I'm really picky when is comes to my suspension and handling as I tend to do track days with my other cars, but this truck is my daily driver. I wanted a more comfortable, but fun ride that I can zip around corners. I didn't want to put a ton of money into it, that's way I bought the kit. If I had to do it over agin, I don't think I woud recommend this kit. You can probably piece together your own kit with better shocks, and better swaybar endlinks/mounts for around the same price. I'll probably upgrade to better shocks in the future.
Theres about 1 inch travel in the front after shaving down the new bumpstops a little. In the rear I have zero travel it's riding on the new bump stops, as I did not c-notch.