|
08-17-2014, 08:51 PM | #1 |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
As with many others this project is one large project consisting of a whole bunch of small ones. Tonight I'm focusing on an area that I've many others ponder what to do with the exposed wires and steering column mounting clamp when using a GM column.
I had an idea of what I wanted but couldn't picture in my head a good design so I built, then modified. My original idea, something that went covered the area. From the pics above I smoothed the edges and rounded the bottom. I made a upper plate that will go above the column to cover the top half up to the dash of the truck. Finally satisfied with the design I sand blasted then used a thin layer of glazing putty to smooth the surface, after the putty came epoxy primer and high build primer. Then a final block sanding and ready for paint. Same process for painting, clearing and cut and buffing. I'm still piecing the dash parts together to confirm everything is still gonna fit after painting. Without a cover under the column, exposed wires and holding clamp. Cover now in place, no clamp, no wires. A look from the other side. I've found these flat stainless washers that have a thin layer of rubber on one side, I really like them, I can tight up against the painted surfaces and not damage the paint. This is where the build thread and all the pictures come together, it's gonna be fun taking pictures from the last couple of years and combine them for a before and after story.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 Last edited by Stepside Jim; 08-17-2014 at 08:56 PM. |
08-17-2014, 10:14 PM | #2 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: 1957 Chevy truck re-rebuild
Really like that column cover. That is Slick
|
08-17-2014, 10:20 PM | #3 |
Registered User
Join Date: Oct 2013
Location: Oklahoma City Okla
Posts: 196
|
Re: 1957 Chevy truck re-rebuild
Thanks for posting. I like the attention to detail and how you solved a problem. Like the work.
Dwight |
08-18-2014, 07:00 AM | #4 |
Registered User
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
|
Re: 1957 Chevy truck re-rebuild
That looks sweet, where is it attached at?
__________________
"Fear makes the wolf look bigger" http://67-72chevytrucks.com/vboard/s...d.php?t=305629 |
08-18-2014, 06:31 PM | #5 |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
First, thanks everybody, like I mentioned, it seems these exposed wires and clamp is an eye sore for everyone, I knew somehow I was going to get them taken care of, I just had to keep trimming and reshaping my original piece.
As for mounting it I simply welded a web/gusset on the main column clamp, then drilled 2 holes and used rubber well nuts that have a regular metal nut with in them. Once tightened they hold well, when loose, they allow a little wiggle room. Ok, for the attaching nut on the lower side you have to realize the main clamp in the picture above has slotted mounting holes, what I found was, each time I removed and re-tightened the main clamp, the distance changed from the clamp mounting holes to the lower mounting holes, grrrrrrr, then I had to force the bolts in place. And no, loosening the main clamp and attaching the cover first was not an option, once the cover is in place, I can't get to the main clamp bolts to tighten them after the cover is on.. Notice the lower mounting holes, I made drop brackets holding the nuts. Now if the distance changes, I can simply bend the bracket slightly to move the nut where I need to so the holes in the cover match the lower mounting nuts. Yes, I know, sometimes I tend to complicate things, on the other hand, I'd rather foresee an issue during mock-up, than fight something after painting.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 |
08-18-2014, 09:49 AM | #6 |
Registered User
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
|
Re: 1957 Chevy truck re-rebuild
That's real nice.
I may have to copy it when I get there on mine. Kim |
08-18-2014, 06:11 PM | #7 |
Registered User
Join Date: Aug 2013
Location: Adelaide, South Australia
Posts: 241
|
Re: 1957 Chevy truck re-rebuild
Good job on the steering column cover. Nice touch
__________________
Nev Need a bigger garage so I can keep more cool cars alive My build, a long way to go. http://67-72chevytrucks.com/vboard/s...d.php?t=595909 |
08-18-2014, 07:10 PM | #8 |
Senior Member
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: 1957 Chevy truck re-rebuild
I'm surprised no one has yet offered (as far as I know) a cover like this commercially given all the trucks like ours with aftermarket modern steering columns.
PS: What's the third switch hole on the left side of the column for?
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
08-18-2014, 10:17 PM | #9 | |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
Quote:
The far left hole is for the headlight switch, the far right hole is for a manual choke cable and the new center hole is for a master switch for switches I will have in the front of the center counsel between the seats. There will be the individual switches for the exhaust cut outs, line lock and nitrous. By having a master switch for these items I don't have to worry about anybody messing around without my permission.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 |
|
08-24-2014, 10:45 PM | #10 |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
Since the steering column is the focus right now I figure I'd put together a batch of pictures showing the column going from an ignition switch and automatic transmission lever column to a dash switch/floor shifter column.
It seems to be from a 1978 or newer mid-sized GM. I'm guessing the interior was blue. The hacksaw and rotary brr is gonna place a part here. Here goes the column shifter mount. Next up is the ignition switch mount. Once I disassembled the upper part of the column I was able to hold this in the vise and cut off the mount for the switch. Sorry for the bad pics here.... but I used the rotary brr to cut a recess in both the switch opening and the shifter opening. Then for both areas I cut a thin piece of aluminum that fit the recessed areas. Then using JB weld I glued the aluminum plates in place, then once the plates were dried I scuffed the whole area and used more JB weld to fill and smooth the areas. Once the ares were filled an leveled, then the appropriate primers were used before paint. This column had a column dimmer switch but I didn't want it due to the fact that it was seen on the lower part of the column. My lower cover could have covered it but it would have a bulge that I felt would look bulky. Since the turn signal switch moved up and down and side to side it had a large opening were the lever came out, I had to cover part of the opening. I glued in a piece of black plastic in a lower piece. Now when the column pieces are slid together, the plastic extends upward to cover much of the opening except for where the lever needs to move up and down. I bought Billet Specialties tilt and turn signal handle kit, problem was, it was for the earlier column, not the 1978 and later, I was able to use the outer handles from the kit but had to cut an thread 1/4" stainless rod to get the right length and angle for this column. There we are, a smooth column adapted for the truck. In the end, if this column didn't come with the truck, I would have saved a ton of time getting an aftermarket column. For anybody with a truck and having the switch and shiifter like I did and would like to adapt it, perhaps this write up will help.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 Last edited by Stepside Jim; 08-24-2014 at 10:51 PM. |
08-25-2014, 09:26 AM | #11 |
Registered User
Join Date: Feb 2013
Location: Lakeside Ariz
Posts: 445
|
Re: 1957 Chevy truck re-rebuild
Jim nice work on the steering column. I need to do the same thing on an El Camino column that I am working on now. Rich
|
08-25-2014, 06:10 PM | #12 | |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
Quote:
There is one cool thing about this steering column that I don't think the aftermarkets offer, you can still use the steering wheel locking devise. Instead of using the key switch that inturn rotates a gear assembly that pushes up the pin that locks the steering wheel and at the same time pushes a rod downward that operates the electrical ignition switch lower on the column that we have removed in this case. By using the rod that comes down to operate the electric ignition switch we can push it up and down to operate the steering wheel lock. I added a bit of rod from the dimmer switch, then put a 90 degree bend to it. Then made a simple plate with two recessed areas to lock the rod into locked position and non lock position. In the pics I have a piece of vacuum hose on the rod, later I'll change it to a vacuum hose cap. In the free position. Now the locked position. There, now at least we have a choice to have it locked or un-locked.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 |
|
09-08-2014, 09:12 AM | #13 |
Registered User
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
|
Re: 1957 Chevy truck re-rebuild
Interior is looking great.
Nice fab work on the brake lines. Kim |
09-08-2014, 09:29 AM | #14 |
Navy Radioman Veteran
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,350
|
Re: 1957 Chevy truck re-rebuild
Very nice...
__________________
1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside |
09-08-2014, 10:31 AM | #15 |
Registered User
Join Date: Feb 2013
Location: Lakeside Ariz
Posts: 445
|
Re: 1957 Chevy truck re-rebuild
Very nice work Jim.
Rich |
09-10-2014, 11:49 PM | #16 |
Registered User
Join Date: Dec 2012
Location: new york
Posts: 292
|
Re: 1957 Chevy truck re-rebuild
Good lord you have a lot of hours into making some kick arse parts. It's a killer truck bro. Kudos to you.
__________________
Magic happens with a welder and a grinder. My custom tubular c10 laying rockers. http://67-72chevytrucks.com/vboard/s...78#post5970778 |
09-10-2014, 11:58 PM | #17 |
Senior Member
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: 1957 Chevy truck re-rebuild
Totally agree. Impressed!
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
09-11-2014, 12:34 AM | #18 |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
Thanks everybody, after a couple of years of bodywork and fabrication it feels great seeing all the pieces start coming together.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 |
09-11-2014, 02:06 PM | #19 |
Registered User
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
|
Re: 1957 Chevy truck re-rebuild
That's what sets apart a nice truck from a very nice truck.
__________________
1952 Canadian Chevy 1300 C4 IFS & D44 IRS 5.3 HO L33 My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938 |
09-14-2014, 11:45 PM | #20 |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
Thanks FarmerSid.
I finally finished the brake lines front to rear. I didn't fill it with brake fluid and bleed the system yet. Hopefully I will be painting most of the front of the truck in the next couple of weeks. By removing much of the brake system including the booster and master cylinder I have less parts to cover to keep over spray getting on them. I'm just glad to have everything fitted and formed for later. Where many build their trucks and hide the master cylinder and accessories, I figured I'd whoop it up. I've shown the booster, cylinder, proportioning valve and line lock, now to finish the metal brake lines. We've all seen where the factory will coil the metal line before it screws into the master cylinder. This procedure allows the metal line to flex as the body and frame flexes while driving down the road. Using the coil line idea I got a piece of 2 1/4" exhaust pipe and start coiling the line. With the two fronts I coiled them opposite of each other and the rear I coiled it to head in it's own direction. Checking the clearance of the steering column I had to shape the lines slightly so the won't make contact, all in all the extra bends add to the detail of the lines. Brakes....done.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 |
09-15-2014, 09:33 AM | #21 |
Registered User
Join Date: Feb 2013
Location: Lakeside Ariz
Posts: 445
|
Re: 1957 Chevy truck re-rebuild
Nice work. and another step closer. Rich
|
09-15-2014, 10:08 AM | #22 |
Registered User
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
|
Re: 1957 Chevy truck re-rebuild
Those coiled brake lines look real nice.
Kim |
09-28-2014, 09:55 PM | #23 |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
Finally, the time has come for some exterior paint. In a fortunate turn of events I got a week off and the weather has been very cooperative.
I started on Sunday, very focused to get paint on much of the cab and forward. I started with 400 grit on all the panels to sand the feather fill primer. Once done and I approved all the finish on the panels I went to 600 grit for a final sanding. Then came the taping and masking papering of all the paint work I've already done. The I cleaned and cleaned with pre cleaner to remove left over sanding dust from the surface and all the cracks and crevices, all the time wearing rubber gloves, just the sweat and oil from your fingers can cause issues and fish eyes. I took me 3 days to sand, mask, and clean. Finally time for sealer (slightly over reduced epoxy primer) one medium to wet coat. I'm doing a two tone, but I need a pin stripe to split the two colors. I love the red pin stripe on the dash, so I spray two coats of red where I want to split the two tone. I can honestly say, I didn't get much sleep this last week, I knew I was venturing into new territory for myself. I had so many options of how to paint all the pieces. I could jam everything, where I spray all the door jams then assemble and spray as one piece, or, be stubborn and do every piece separately. I've had this truck together and apart perhaps 15 times now so I chose the hard way, I am gonna do this in pieces. Problem is, I have to have all the pieces together to lay out the pinstripe. So, Thursday morning sealer, Thursday afternoon, red paint, Thursday night, no sleep, Friday morning, assembly of the panels, then lay out the pinstripes. Nervous, absolutely..... one panel at a time then the hood, should have had my Wheaties this morning. Yes, new socks, great for spacing, great for no scratching. Time for a short break, relax, settle the heart rate.... I can't wear the rubber gloves for the pinstripe, the tape adhesive sticks to the gloves. The concern about the bare hands is, I can not use the pre cleaner to wash the panels anymore, the primer and paint is to fresh and will make a mess. With clean hands I start laying tape where I want the red to be when done. Ok, whats up with all the extra tape??? The 1/4" is the direct split between the black and silver. The 1/8" is merely decorative, it will have black both on top and bottom of it. I wanted a 1/4" space between the two pinstripes, by putting small pieces of 1/4" tape between them I keep an accurate 1/4" between the two pinstripes. I will remove the small pieces before painting. Once I got all the striping done I disassembled the truck and it was time for silver paint. The silver is the bottom color so it will be easier to mask it off. Also, if I sprayed the black first, then if I didn't mask it perfectly and some of the sparkle of the silver floated on to the black it would stand out more than if some black drifted onto some silver. With this next picture I sprayed the silver, then after I sprayed the silver I had lunch. I ran the 1/8" pinstripe up over the headlights, the more I thought about it, I just couldn't leave it that way. Yes, I know, it looks good on the Batmobile. I'm looking for the black to be an authoritative/aggressive color and I feared the over the headlight pinstripe would remove some of the aggressive look I'm looking for. Once the silver dried I cut the tape then sanded the tape line. this is why you will see a red stripe going over the headlight. It will all be black so the red stripe will disappear later. Once the silver dried it was masking time. In this case I taped to the 1/4" pinstripe line. How cool is this that although I lived through this process this week, this is now a diary that I can relive the whole thing again. It's getting long winded here. Tomorrow I'll start with the black.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 |
09-28-2014, 10:42 PM | #24 |
Senior Member
Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: 1957 Chevy truck re-rebuild
Lookin' Good ! Nice work, I like the red stripe splitting the colors.
BTW the coiled brake lines should be mounted vertically like the factory does, otherwise the potential is there to trap air in the top of the coils and cause a mushy peddle feel.
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
09-28-2014, 10:48 PM | #25 | |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: 1957 Chevy truck re-rebuild
Quote:
Thanks.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132 |
|
Bookmarks |
|
|