![]() |
![]() |
#501 | |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
Quote:
![]() ![]() ![]() So when and why are you heading this way? How close are you going to get? Kevin LFD Inc. Last edited by Rokcrln; 06-12-2007 at 11:51 PM. |
|
![]() |
![]() |
![]() |
#502 |
Eat My Rust
Join Date: Jan 2007
Location: Cypress, Texas
Posts: 3,362
|
Re: LFD's low buck truck build!
Give that truck 2 weeks of driving, and that ecu will have that motor running like a beast. It takes them some time to learn and tune.
How much of a difference would you say the dynomat does for the quietness in the cab? All were doing on my '69 is dropping in some carpet, and thats probally going to be it. |
![]() |
![]() |
![]() |
#503 | |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
Quote:
The Dynomat is night and day differance and I still have the fire wall and doors to do. I will be putting this in every vehical I build for my self and I will push it on customers as well, it is that good. Kevin LFD Inc. |
|
![]() |
![]() |
![]() |
#504 |
Gentleman Jim Driver
Join Date: Nov 2002
Location: Poulsbo, WA
Posts: 1,550
|
Re: LFD's low buck truck build!
This thread needs to be in the build forum.
__________________
Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed |
![]() |
![]() |
![]() |
#505 |
Registered User
Join Date: Feb 2006
Location: Oklahoma City
Posts: 588
|
Re: LFD's low buck truck build!
Any updates its been a couple months?
__________________
1970 Chevy C10 "Under Construction" ![]() 2002 Chevy S10 V6 ![]() |
![]() |
![]() |
![]() |
#506 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
Well the truck is complete as far as the Low Buck portion goes and now I will be changing things up just a bit. I am parting out one of my other builds and will be using the vett LT1 and 700R4 in Low Buck as well as my (7 yrs in boxes) old Vintage Air kit. The motor what is in their now is a new crate 350 with a turbo 350 trans and it will be going into my 70 2wd Blazer to help get that on the road. I also just had the rear end of Low Buck rebuilt with 3.43's, an Eaton Posi, new axels, seals and bearings. I figure with 360+HP I might need alittle more out back. Plus the old rear end started poping going around turns and just felt sloppy. Turns out it was very sloppy with warn out Axel splines, loose center carrier and a bad pinion bearing as well as 3.08's.
Kevin LFD Inc. Last edited by Rokcrln; 09-01-2007 at 09:19 AM. |
![]() |
![]() |
![]() |
#507 |
Registered User
Join Date: Jan 2007
Location: Winters, Ca.
Posts: 1,069
|
Re: LFD's low buck truck build!
NOOOOOO!!!!!!!
Please tell me your not tearing apart the bodydropped orange truck? I love that truck! Everytime I drive past your house I look over in hope to see that truck layed out in the driveway! Maybe I'll stop by tommorrow to see what the wheels in your head are spinning now. I can only bet what ever you're up to is gonna be even better then before! Later Kevin. Tony from Norcal |
![]() |
![]() |
![]() |
#508 |
Burnouts are therapeutic
Join Date: Jun 2007
Location: lancaster, south carolina
Posts: 852
|
Re: LFD's low buck truck build!
when you shortened bed how did you keep the cut lines on inside of bed lined up with outside?
__________________
1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein |
![]() |
![]() |
![]() |
#509 |
Registered User
Join Date: Jul 2005
Location: SK, Canada
Posts: 488
|
Re: LFD's low buck truck build!
Awesome work! I'm eager for updates!
__________________
Evan B. |
![]() |
![]() |
![]() |
#510 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
For curent update for now look at my other thread on this list called Shell Games. I took the truck to work this week and it did about 300 miles round trip per day and worked great. I averaged about 16mpg and 70-85 MPH
![]() Kevin LFD Inc. |
![]() |
![]() |
![]() |
#511 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
It's back! Sorry it has been so long since my last post but I have been all over the place (inmy own head and shop
![]() Last time I left I was sitting at $3936.40 and 110hrs but I think I left a few things out like Dyna mat pricing and the hood mod time. I think the dyna mat was $170 for what is in the cab now and about 4hrs to install with pulling the seat and carpet. The hood hod was free but time was around 30hrs ![]() ![]() Now I have done a few small things since I last posted but I will leave the time and cost out of the total. Reason is because I swapped out the motor and tranny for one I already had and the one that was in the truck was just fine and did not need to be pulled. I decided to sell Slow Build and did not want to take such a big loss so I pulled my LT1 and custom built 700R4 and swapped them. (But just for info sake I was into the engine and tranny about $8k) and that just reminded me I also put in a Vintage Air set up I had for that truck as well so their adds another $1000 and 12hrs ![]() ![]() Here are some of the threads of what has happened out side this thread but all to the same truck so you all can catch up on your reading ![]() Engine swap, A/C install~http://www.67-72chevytrucks.com/vboa...d.php?t=256484 Seat install~http://67-72chevytrucks.com/vboard/s...d.php?t=269662 Pedal mod's~http://67-72chevytrucks.com/vboard/s...d.php?t=269717 So now I have a few weeks of semi free time so my wife want me to get the truck painted (I think she wants to start driving it but even she has standards ![]() ![]() Then once the inside is ready I think I will make my fiberglass molds for the rear speaker box and kick panel speaker boxes since I don't want to fiber glass after it is painted. I will just tape off the areas and glass them to get the exact mold of the body so I can then build the enclosure's later down the road with out pulling it all apart again. Then I will mask off alot of items and start spraying the interior and all the jambs. The plan is to spray the truck all together after the inside and jambs are sprayed. I am not going for a show truck just a clean Driver that will get alot of looks on the road. I have minor body work to do so it should go fast. Just a few extra trim holes and the tree sets of old mirriors that left a few marks as well as the drivers door dent. I think if I can get a solid week end I Can have the out side of the truck (minus bed) ready for primming and blocking, well see. I have started another thread for paint but I think I will keep it al here since this is the wrap up of the Low Buck build. I wonderhow many pages we can get up to ![]() I will be doing mine in a single stage paint with some clear added into it for a better cut and polish job after it is layed down. Also it will be a solid blue and not a matalic like John's truck. Well thaks for following along with this build and I hope to be all finished by the end of the year! John thaks again for the aproval for me to do a slight copy ![]() Kevin LFD Inc. 166hrs $5500.00 Last edited by Rokcrln; 12-13-2007 at 05:10 AM. |
![]() |
![]() |
![]() |
#512 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
Well I hads afew hours tonight so I started stripping it down. Turns out the front fenders and doors will now be comming off so I can re-build the door hinges and get to the trim nuts to remove. So now I guess it will have a better paint job than I was going to do but still simple. I ordered a few parts from ECE today for the project. I got one of their black powder coated cowl screens and their tailgate handle relocation kit. Theirs does not require a tailgate skin for this mod. Next I will call up LMC and get all new tinted glass and that should be about everything but paint that I need.
Here are a few pics from tonight. Rember 2 hours ago this was complete ![]() Kevin LFD Inc. 166hrs $5500.00 Paint hrs 2 Last edited by Rokcrln; 12-15-2007 at 04:40 PM. |
![]() |
![]() |
![]() |
#513 |
Eat My Rust
Join Date: Jan 2007
Location: Cypress, Texas
Posts: 3,362
|
Re: LFD's low buck truck build!
Great to see it back!
|
![]() |
![]() |
![]() |
#514 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
Well I called ECE yesterday at 2:15pm and gave them my credit card for the tailgate handle relocator kit and my cowl screen and at 3:00pm today it was in my front living room! Now I just need time to install it. It wont be untill the cab and front end are done because I will be doing the bed last. I hope this week end I will make a good dent in the prep. I have alot of trim holes to weld up and DA work to do.
Kevin LFD Inc. Last edited by Rokcrln; 12-15-2007 at 01:22 PM. |
![]() |
![]() |
![]() |
#515 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,222
|
Re: LFD's low buck truck build!
Paint? Well, there goes that "sleeper" look you liked.
![]()
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#516 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
I know it was starting to grow on me! But I feel it will still be a sleeper of sorts. I am going for a simple stock but lowered look that will still be housing almost 400hp! Maybe more if I get board
![]() Kevin LFD Inc. |
![]() |
![]() |
![]() |
#517 |
Eat My Rust
Join Date: Jan 2007
Location: Cypress, Texas
Posts: 3,362
|
Re: LFD's low buck truck build!
OH please get bored!
![]() Last edited by texanidiot25; 12-14-2007 at 05:07 PM. |
![]() |
![]() |
![]() |
#518 |
On the fast track to nowhere..
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,316
|
Re: LFD's low buck truck build!
![]()
__________________
-Mike Owen- Norwood, Houston, Cecilia, Jackson, Monroe and counting |
![]() |
![]() |
![]() |
#519 |
Grand PooBaa Member
Join Date: Jan 2001
Location: LA, CA
Posts: 5,302
|
Re: LFD's low buck truck build!
Sounds like you can walk to ECE and pick up your parts. Now I have an idea where Winters, California is located.
|
![]() |
![]() |
![]() |
#520 |
Registered User
Join Date: Oct 2007
Location: Tucson, Az
Posts: 172
|
Re: LFD's low buck truck build!
wow!!! great work!!!
|
![]() |
![]() |
![]() |
#521 | |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
Quote:
Winters is 20min away from Sacramento near Vacaville. Zip 95694 It is a great little town. Kevin LFD Inc. |
|
![]() |
![]() |
![]() |
#522 | |
Grand PooBaa Member
Join Date: Jan 2001
Location: LA, CA
Posts: 5,302
|
Re: LFD's low buck truck build!
Quote:
|
|
![]() |
![]() |
![]() |
#523 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
Love working in the cold and dark! Well I did about 3hrs tonight and made good progress for the time I spent. I hope to have the drivers door, cab top and back done Friday night as far as DA work goes. Then I will blow it all off and pull it into the shop for the interior work and to pull off the pass fender. I will need to pull the batery and all my relays that are mounted on the pass fender in order to remove it so I thought I would wait till last to make it a push toy for a few weeks. I am into this part now $30.00 for an 80grit roll of 6" DA disks.
So far so good I have not found any bad spots and hope to not find any surprizes! Ya right! Kevin LFD Inc. 166hrs main build $5500.00 main build 5.5 Paint hrs $30.00 Paint Last edited by Rokcrln; 12-15-2007 at 04:51 PM. |
![]() |
![]() |
![]() |
#524 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: LFD's low buck truck build!
I decided I will be running these tail lights and markers so I figure I better run the side trim as well. I think with out the trim it will look to plain and the lights will stand out as odd and not the smooth subtle look I am going for. For trim I have all new 68 side trim I will be using so I still need to fill all the old holes. This is what it looks like! No idea on price because the side markers are not even ready for sale just yet but should be in the next month or so.
Kevin LFD Inc. Last edited by Rokcrln; 12-15-2007 at 05:25 PM. |
![]() |
![]() |
![]() |
#525 |
Registered User
![]() Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: LFD's low buck truck build!
So much for the low buck concept huh?
![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|