Its Mine the World Famous 67 Dragtruck - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

57sailplane · 10-30-2007, 04:10 PM

i now its probably nothing but i am welding the brackets on for my rear coils and was wondering what is the ride height between the top of your rear axel and the bottom of your frame. the distance between the top of the axel and the frame. were the frame rides over the axel. i want to go the minimum i can here and was wandering what you are runing... thanks for all your help. andrew

djracer · 10-30-2007, 05:07 PM

Mine is c notched You might be able to see it in this pic!

a small section of the top is left to say it has stock frame rails!

drbyrdman · 11-02-2007, 07:04 PM

Wondering if these would fit my truck???
NEW MICKEY THOMPSON TIRES 33/21.5/R15 & 26/8.5/15 - $1500

Brand new never used Mickey Thompson Drag Racing tires and Centerline Wheels. For tubbed out Hot Rod.
Front Tires: 26/8.5/15, Rear Tires: 33/21.5/R15. 5" Lug Pattern

Sold car never got the chance to use them. Paid $2100.00

djracer · 11-04-2007, 10:16 PM

you would have lug pattern isuues for sure and would probably have to have the rearend narrowed and the bed tubbed

drbyrdman · 11-05-2007, 09:46 AM

I fitted them last nite. To wide. My truck is tubbed and has a narrowed 9" under it. 21.5 stick out around 2" to much. Dam it did look good.

djracer · 11-05-2007, 10:02 AM

you may want to dis mount a tire ans see if the wheel fits under the bed you can get a smaller tire! the hoosiers look real good!

Evans · 12-31-2007, 08:00 PM

Kevin , anything new with the truck ???

djracer · 01-03-2008, 06:22 PM

I have been real busy and haven't touched it in a couple monthes but I will before too long.

Couch · 01-30-2008, 03:52 PM

ok. wow. my eyes hurt. i just spent like 2 hours reading this hole topic. great build. love the truck. i have a couple questions for dj racer. do you still have the crank trigger for sell and what kinda tire did you ever decide to stick with? that thing looks wicked tuckin the slicks the way it does

djracer · 01-30-2008, 09:49 PM

Sorry for the long thread! I don't have the crank trigger anymore.

As for tires I want to eventually have two sets of rear wheels. One with 33 x 10.5w and one with 29.5 x 10.5. The main reason for running these sizes is I can buy take off's with 4 to 10 runs for around a hundred dollars a set! I actually want to try some dot tires also. We have some classes in this area that limit you on a slick but will let you run a larger dot tire! I like the Hoosiers a little better than the Micky Thompsons in a slick.

Couch · 01-31-2008, 12:30 AM

werd hoosiers all the way. thats what im running right now.28 x 10s wi8th 4.10's, but im also a sbc. it'll be the first time at the track this weekend if it doesnt rain. i wish we had available takeoffs around here.

djracer · 01-31-2008, 12:54 AM

Good luck at the track. Take offs are cheap but you are a little limited in size choices!

JayG · 02-01-2008, 03:33 AM

Great build thread guys! Started reading it last night, but ran out of time. Finished it at work during lunch today. I greatly admire all you racers for your dedication to your racing. dj and Bigjim as well as the others, AWESOME trucks!!

71Dragtruck · 02-01-2008, 11:54 AM

Here's another good thread we had going before they gave us our own section. And not just saying that because I started it.

http://67-72chevytrucks.com/vboard/s...d.php?t=203647

djracer · 03-09-2008, 08:46 AM

We got the truck back in the shop! A few updates start tomorrow!

regan wilson · 03-15-2008, 07:08 PM

Nice truck DJ .......So how fast has it gone ? I thought I saw in the thread it has run faster than what you have in your sig .

djracer · 03-16-2008, 04:31 AM

Quote:

Originally Posted by regan wilson

Nice truck DJ .......So how fast has it gone ? I thought I saw in the thread it has run faster than what you have in your sig .

That's it so far but I haven't made a full quarter mile pass with the spray. Most racing around here is 1/8th mile! I mostly run the 6.00 class. Last year at super chevy I time trialed with the dot cars and forgot to put enough time in the timer.(the time in my sig with 6 seconds of spray) The next time I tried for a full quarter mile shot the track locater broke at the hit of the transbrake. I lifted and didn't hurt anything. I had a friend come weld it back on at the track but on test and tune night the track goes to crap from the street cars the later the night gets. The truck has gone 5.32 in the eighth when the previous owner had the truck with 512ci and 2 stages of nitrous. I wanted to try to get in the 8's last year but never got to make it happen. I have a fogger and I would like to try the 468 with two stages since I can't afford what I really want which is a 565! I really like your truck and have tried to get up with you in the past. I wonder how fast my truck would be with your motor! I'm at 3200 pounds with me in it! I'm gonna try to pick it up some this year. I think one of the first thinks I'll do is plumb the fogger and send my carb to patrick at pro systems! I also never really had the right tire for the gear. I have been running 33x10.5w's and I tried some 29.5 true 10.5's and went almost as fast but had tire shake! I'd love to see your truck in action! If you come east to race let me know! You should do a write up on your truck in the racing section. I think you have the fastest truck on the board(for now)

regan wilson · 03-18-2008, 05:26 PM

Thanks DJ . I dont get east much more than Memphis . We did go to Reynolds Ga last Oct . Oh your truck would friggin fly with my motor in it . Im sure it would go 8.50's

djracer · 04-29-2008, 06:10 AM

For those who follow this thread. I ran my best pass ever and it was filmed for the speed channel tv show Pass Time! Times are updated in my sig. The show should air in late June!

Couch · 04-29-2008, 06:16 AM

wow. thats bookin it. i'll be sure to record that episode

tvblazer78 · 04-29-2008, 04:12 PM

Looks good love the truck!!

Are you putting any paint on it?

djracer · 04-29-2008, 05:29 PM

I'll paint it one of these days! When it runs as fast as I want it to!

71Dragtruck · 04-29-2008, 09:18 PM

Quote:

Originally Posted by djracer

I'll paint it one of these days! When it runs as fast as I want it to!

I guess she'll be in primer for ever then hey Kevin?

Can't imagine anyone going as fast as they want to go!

djracer · 04-29-2008, 10:51 PM

When I get faster than Tom went in the truck I might paint it! I really want a 565 but I can't give my 468 away! I might atleast paint the front like the bed is painted!

Couch · 04-29-2008, 11:06 PM

you can give that 468 this way. i'll arrange shipping.lol

10-30-2007, 04:10 PM	#501
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Its Mine the World Famous 67 Dragtruck i now its probably nothing but i am welding the brackets on for my rear coils and was wondering what is the ride height between the top of your rear axel and the bottom of your frame. the distance between the top of the axel and the frame. were the frame rides over the axel. i want to go the minimum i can here and was wandering what you are runing... thanks for all your help. andrew

10-30-2007, 05:07 PM	#502
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Mine is c notched You might be able to see it in this pic! a small section of the top is left to say it has stock frame rails! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-02-2007, 07:04 PM	#503
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Its Mine the World Famous 67 Dragtruck Wondering if these would fit my truck??? NEW MICKEY THOMPSON TIRES 33/21.5/R15 & 26/8.5/15 - $1500 Brand new never used Mickey Thompson Drag Racing tires and Centerline Wheels. For tubbed out Hot Rod. Front Tires: 26/8.5/15, Rear Tires: 33/21.5/R15. 5" Lug Pattern Sold car never got the chance to use them. Paid $2100.00 Attached Images

11-04-2007, 10:16 PM	#504
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck you would have lug pattern isuues for sure and would probably have to have the rearend narrowed and the bed tubbed __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-05-2007, 09:46 AM	#505
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Its Mine the World Famous 67 Dragtruck I fitted them last nite. To wide. My truck is tubbed and has a narrowed 9" under it. 21.5 stick out around 2" to much. Dam it did look good.

11-05-2007, 10:02 AM	#506
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck you may want to dis mount a tire ans see if the wheel fits under the bed you can get a smaller tire! the hoosiers look real good! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-31-2007, 08:00 PM	#507
Evans Registered User Join Date: Feb 2007 Location: Dallastown , Pa Posts: 261	Re: Its Mine the World Famous 67 Dragtruck Kevin , anything new with the truck ???

01-03-2008, 06:22 PM	#508
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck I have been real busy and haven't touched it in a couple monthes but I will before too long. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-30-2008, 03:52 PM	#509
Couch Daily Driver Join Date: Jul 2007 Location: fresno,ca Posts: 228	Re: Its Mine the World Famous 67 Dragtruck ok. wow. my eyes hurt. i just spent like 2 hours reading this hole topic. great build. love the truck. i have a couple questions for dj racer. do you still have the crank trigger for sell and what kinda tire did you ever decide to stick with? that thing looks wicked tuckin the slicks the way it does __________________ nitrous...the equal opportunity destroyer.

01-30-2008, 09:49 PM	#510
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Sorry for the long thread! I don't have the crank trigger anymore. As for tires I want to eventually have two sets of rear wheels. One with 33 x 10.5w and one with 29.5 x 10.5. The main reason for running these sizes is I can buy take off's with 4 to 10 runs for around a hundred dollars a set! I actually want to try some dot tires also. We have some classes in this area that limit you on a slick but will let you run a larger dot tire! I like the Hoosiers a little better than the Micky Thompsons in a slick. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-31-2008, 12:30 AM	#511
Couch Daily Driver Join Date: Jul 2007 Location: fresno,ca Posts: 228	Re: Its Mine the World Famous 67 Dragtruck werd hoosiers all the way. thats what im running right now.28 x 10s wi8th 4.10's, but im also a sbc. it'll be the first time at the track this weekend if it doesnt rain. i wish we had available takeoffs around here. __________________ nitrous...the equal opportunity destroyer.

01-31-2008, 12:54 AM	#512
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Good luck at the track. Take offs are cheap but you are a little limited in size choices! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-01-2008, 03:33 AM	#513
JayG Formerly ADHDCARGUY Join Date: Mar 2005 Location: DUNCANVILLE, TX Posts: 1,213	Re: Its Mine the World Famous 67 Dragtruck Great build thread guys! Started reading it last night, but ran out of time. Finished it at work during lunch today. I greatly admire all you racers for your dedication to your racing. dj and Bigjim as well as the others, AWESOME trucks!! __________________ Jay 67CHEVY SWB,355, built 700r, 5/7,9",posi 3.50,REAR BAGS,HOOSIERS, A/C. 54CHEVY - BURB, beginning construction(well, i gotta take it apart first!) 36FORD PU - WAITING 38CHEVY - 2DR SD,CHASSIS FINISHED 46CHEVY - BURB - waiting

02-01-2008, 11:54 AM	#514
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Its Mine the World Famous 67 Dragtruck Here's another good thread we had going before they gave us our own section. And not just saying that because I started it. http://67-72chevytrucks.com/vboard/s...d.php?t=203647 __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

03-09-2008, 08:46 AM	#515
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck We got the truck back in the shop! A few updates start tomorrow! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

03-15-2008, 07:08 PM	#516
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Its Mine the World Famous 67 Dragtruck Nice truck DJ .......So how fast has it gone ? I thought I saw in the thread it has run faster than what you have in your sig . __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

03-18-2008, 05:26 PM	#518
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Its Mine the World Famous 67 Dragtruck Thanks DJ . I dont get east much more than Memphis . We did go to Reynolds Ga last Oct . Oh your truck would friggin fly with my motor in it . Im sure it would go 8.50's __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

04-29-2008, 06:10 AM	#519
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck For those who follow this thread. I ran my best pass ever and it was filmed for the speed channel tv show Pass Time! Times are updated in my sig. The show should air in late June! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-29-2008, 06:16 AM	#520
Couch Daily Driver Join Date: Jul 2007 Location: fresno,ca Posts: 228	Re: Its Mine the World Famous 67 Dragtruck wow. thats bookin it. i'll be sure to record that episode __________________ nitrous...the equal opportunity destroyer.

04-29-2008, 04:12 PM	#521
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Its Mine the World Famous 67 Dragtruck Looks good love the truck!! Are you putting any paint on it? __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

04-29-2008, 05:29 PM	#522
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck I'll paint it one of these days! When it runs as fast as I want it to! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-29-2008, 10:51 PM	#524
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck When I get faster than Tom went in the truck I might paint it! I really want a 565 but I can't give my 468 away! I might atleast paint the front like the bed is painted! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-29-2008, 11:06 PM	#525
Couch Daily Driver Join Date: Jul 2007 Location: fresno,ca Posts: 228	Re: Its Mine the World Famous 67 Dragtruck you can give that 468 this way. i'll arrange shipping.lol __________________ nitrous...the equal opportunity destroyer.

Register or Log In To remove these advertisements.