Rustbuket 67 build "Georgia" - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DD1 · 04-28-2013, 12:12 AM

Hey Dan, wish my garage looked that clean. Probably cause I don't have a little helper like you do.

Had not seen any posts from you in a while. I guess you have been busy preparing for the new arrival!

I have a question for you. I remember seeing pics that you did most of your floor repair with the cab on the frame. Is that about right? I am thinking about removing the old cab, and putting the "new" cab on the frame to work on it. It would free up space in my garage, and make it easier for me to take parts off the old cab.

What do you think? Should I just continue working on it where it is or put it on the frame?

67c10rustbuket · 04-28-2013, 12:23 AM

D it would be much easier off the frame in my opinion. I had to be a contortionist to make some of the repairs while on the frame. But then again I am getting pretty good at doing things the hard way.

Posted via Mobile Device
Posted via Mobile Device

Johnnyfever · 04-28-2013, 01:20 PM

Wow! You're doing it all the "right" way. I've taken a few more shortcuts to get my home/shop truck usable with plans to do suspension upgrades in the future. I'm actually glad I did so I can use your build for future planning. Thanks Dan and keep up the good work. AND DON'T RUN OVER YOUR DOOR!

DD1 · 05-21-2013, 11:04 PM

Hey Dan, we have not heard from you in a while. I am guessing that maybe your new arrival made an appearance? If so, congratulations!

Johnnyfever · 05-23-2013, 09:28 AM

You guys alright over there in OK?

67c10rustbuket · 05-23-2013, 09:39 AM

Quote:

Originally Posted by Johnnyfever

Wow! You're doing it all the "right" way. I've taken a few more shortcuts to get my home/shop truck usable with plans to do suspension upgrades in the future. I'm actually glad I did so I can use your build for future planning. Thanks Dan and keep up the good work. AND DON'T RUN OVER YOUR DOOR!

Thanks again. I keep my doors outside

Quote:

Originally Posted by DD1

Hey Dan, we have not heard from you in a while. I am guessing that maybe your new arrival made an appearance? If so, congratulations!

Hey D, no baby yet... a few more days.. or not

I will let everyone know when the little man arrives !

Quote:

Originally Posted by Johnnyfever

You guys alright over there in OK?

Yes my family is good, we have some employees who lost everything and a few injuries and one lost a spouse in the tornado. Also a few friends and their relatives who also lost homes and businesses. where I work is just south of the damage path by 1-2 miles and a lot of employees lived right there. Bad stuff happenend to a lot of people and their property but the property is just that and can be replaced. Thanks for checking on us.

No truck progress as of yet but I will be off on daddy leave for a few weeks and I will get some truck time in soon.

TchncnDen · 05-25-2013, 08:58 PM

Quote:

Yes my family is good, we have some employees who lost everything and a few injuries and one lost a spouse in the tornado. Also a few friends and their relatives who also lost homes and businesses. where I work is just south of the damage path by 1-2 miles and a lot of employees lived right there. Bad stuff happenend to a lot of people and their property but the property is just that and can be replaced. Thanks for checking on us.

That's some heavy news right there, I'm glad at least you guys are alright. I was wondering when you posted about moving your truck over so your wife could park inside if that would hinder your quick access to the shelter? I'm sure you have that part figured out, just don't block that sucker.

DD1 · 05-27-2013, 10:28 PM

Quote:

Originally Posted by 67c10rustbuket

Hey D, no baby yet... a few more days.. or not

I will let everyone know when the little man arrives !

Yes my family is good, we have some employees who lost everything and a few injuries and one lost a spouse in the tornado. Also a few friends and their relatives who also lost homes and businesses. where I work is just south of the damage path by 1-2 miles and a lot of employees lived right there. Bad stuff happenend to a lot of people and their property but the property is just that and can be replaced. Thanks for checking on us.

No truck progress as of yet but I will be off on daddy leave for a few weeks and I will get some truck time in soon.

Glad to hear you are doing well and made it unscathed through the tornado. It's one thing to hear it on the news, and entirely more surreal to hear it directly from someone you know.

No little one yet, huh? Well, hopefully soon and then you can get back to the truck! Speaking of which, that sounds like something I need to do!

67c10rustbuket · 05-28-2013, 09:02 PM

Quote:

Originally Posted by TchncnDen

That's some heavy news right there, I'm glad at least you guys are alright. I was wondering when you posted about moving your truck over so your wife could park inside if that would hinder your quick access to the shelter? I'm sure you have that part figured out, just don't block that sucker.

Actually the shelter door slides open on the floor toward the wall and they recommend you park over it so if your roof collapses it won't fall on the door or the area needed to open the door. In any event it is registered with the city so they come check on you if a tornado hits.
Thanks for the smilies, Ellie will love those.

Quote:

Originally Posted by DD1

Glad to hear you are doing well and made it unscathed through the tornado. It's one thing to hear it on the news, and entirely more surreal to hear it directly from someone you know.

No little one yet, huh? Well, hopefully soon and then you can get back to the truck! Speaking of which, that sounds like something I need to do!

Here is rustbuket jr. rockin a baby Mohawk

oddly enough one of our nurses was the nurse that almost got sucked out of Moore medical center window during the tornado.
Posted via Mobile Device
Posted via Mobile Device

Zoomin · 05-28-2013, 09:38 PM

Hey!!

Congratulations on the new buckaroo!!
Posted via Mobile Device

es67chevy · 05-28-2013, 11:20 PM

Congratulations!! Love the 'hawk'

**oldman3** · 05-28-2013, 11:21 PM

Dan, congrats on the new one, cute guy...Jim

mcbassin · 05-28-2013, 11:34 PM

Congrats on the new future Chevy gear head!
Posted via Mobile Device

cubber · 05-29-2013, 01:27 AM

congrats, man!

NewType72 · 05-29-2013, 03:38 AM

Congrats Dan and I'm glad to hear your family is all safe send my condolences to those at your work. And have fun on Daddy leve
Posted via Mobile Device

Procurement_man · 05-29-2013, 10:50 AM

Congratulations Dan!

Bomp · 05-29-2013, 11:27 AM

Congrats on the little one.

**scotts62** · 05-29-2013, 11:58 AM

Congrats on the kiddos dude!!

Mustard72 · 05-29-2013, 01:56 PM

Congrats, Dan. Pretty big month you've had.

67c10rustbuket · 05-29-2013, 05:54 PM

Wow thanks for all the congrats etc. he is a great baby, much calmer than our daughter when she was a newborn. We are blessed with such great kids and sooooo happy we got one of each

I picked out a car for him already.... Sent this pic to paw paw

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

NewType72 · 05-29-2013, 07:20 PM

Now that's stylin and profilin
Posted via Mobile Device

**oldman3** · 05-29-2013, 11:28 PM

Start 'em out young....Jim

TchncnDen · 05-30-2013, 06:50 PM

Wooooohooooooo!!!! Mini Mohawk man and a new corvette, very nice. Congrats Dan!

DD1 · 05-30-2013, 10:39 PM

Quote:

Originally Posted by 67c10rustbuket

Here is rustbuket jr. rockin a baby Mohawk

oddly enough one of our nurses was the nurse that almost got sucked out of Moore medical center window during the tornado.
Posted via Mobile Device
Posted via Mobile Device

Congrats, Dan! Cute kid! And I NEVER say that about babies, so you know he's cute!

67c10rustbuket · 06-12-2013, 12:18 AM

Quote:

Originally Posted by NewType72

Now that's stylin and profilin
Posted via Mobile Device

Thanks Dylan, That vette would be awesome when he's big enough

Quote:

Originally Posted by oldman3

Start 'em out young....Jim

Thanks Jim, Need to find a Jr size Mig helmet

Quote:

Originally Posted by TchncnDen

Wooooohooooooo!!!! Mini Mohawk man and a new corvette, very nice. Congrats Dan!

Thanks, our kids must get the hair from the wifes side

Quote:

Originally Posted by DD1

Congrats, Dan! Cute kid! And I NEVER say that about babies, so you know he's cute!

Thanks D, The good looks are from my side

I got my from a arms assembled with Moog ball joints and cross shafts, upper and lower c-arm bumpers (bump stops) from Brothers Trucks, KYB shocks from Rock Auto, Lower arm U bolts from Napa, Western Chassis drop spindles from Brothers trucks. I reused the original shims, stripped and painted. All new hardware. The A-arms are powder coated, Ball joints, shafts, and shims are painted with seymour cast blast paint. Here are a bunch of pics coming up. The driver side pics are kind of dark so only a few of those..Rotors are at Oreilly auto being turned and should be a real rolling chassis real soon!

04-28-2013, 12:12 AM	#501
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: Rustbuket 67 build "Georgia" Hey Dan, wish my garage looked that clean. Probably cause I don't have a little helper like you do. Had not seen any posts from you in a while. I guess you have been busy preparing for the new arrival! I have a question for you. I remember seeing pics that you did most of your floor repair with the cab on the frame. Is that about right? I am thinking about removing the old cab, and putting the "new" cab on the frame to work on it. It would free up space in my garage, and make it easier for me to take parts off the old cab. What do you think? Should I just continue working on it where it is or put it on the frame?

04-28-2013, 12:23 AM	#502
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Rustbuket 67 build "Georgia" D it would be much easier off the frame in my opinion. I had to be a contortionist to make some of the repairs while on the frame. But then again I am getting pretty good at doing things the hard way. Posted via Mobile Device Posted via Mobile Device __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

04-28-2013, 01:20 PM	#503
Johnnyfever Registered User Join Date: Oct 2011 Location: Belton, SC & Atlanta, GA Posts: 181	Re: Rustbuket 67 build "Georgia" Wow! You're doing it all the "right" way. I've taken a few more shortcuts to get my home/shop truck usable with plans to do suspension upgrades in the future. I'm actually glad I did so I can use your build for future planning. Thanks Dan and keep up the good work. AND DON'T RUN OVER YOUR DOOR!

05-21-2013, 11:04 PM	#504
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: Rustbuket 67 build "Georgia" Hey Dan, we have not heard from you in a while. I am guessing that maybe your new arrival made an appearance? If so, congratulations!

05-23-2013, 09:28 AM	#505
Johnnyfever Registered User Join Date: Oct 2011 Location: Belton, SC & Atlanta, GA Posts: 181	Re: Rustbuket 67 build "Georgia" You guys alright over there in OK?

05-28-2013, 09:38 PM	#510
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Rustbuket 67 build "Georgia" Hey!! Congratulations on the new buckaroo!! Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

05-28-2013, 11:20 PM	#511
es67chevy Registered User Join Date: Aug 2007 Location: Bella Vista, AR Posts: 1,107	Re: Rustbuket 67 build "Georgia" Congratulations!! Love the 'hawk' __________________ Eric 1967 C10 SWB 383 Stroker/TH400 Brother's One Piece Power Windows Shaved Doors, Markers, and Bumpers 4/6 Early Classic Drop Rear Fuel Tank (49-52 Chevy Car Tank) Surf Blue Paint Bella Vista, AR (Arkansas for those that get the 'A' states mixed up) My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869

05-28-2013, 11:21 PM	#512
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Rustbuket 67 build "Georgia" Dan, congrats on the new one, cute guy...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

05-28-2013, 11:34 PM	#513
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Rustbuket 67 build "Georgia" Congrats on the new future Chevy gear head! Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-29-2013, 01:27 AM	#514
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Rustbuket 67 build "Georgia" congrats, man! __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

05-29-2013, 03:38 AM	#515
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Rustbuket 67 build "Georgia" Congrats Dan and I'm glad to hear your family is all safe send my condolences to those at your work. And have fun on Daddy leve Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

05-29-2013, 10:50 AM	#516
Procurement_man Registered User Join Date: Sep 2012 Location: Piedmont, OK Posts: 64	Re: Rustbuket 67 build "Georgia" Congratulations Dan! __________________ "God will often give you more than you can handle so you can learn to depend on him rather than on yourself" ...Craig Groeschel

05-29-2013, 11:27 AM	#517
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Rustbuket 67 build "Georgia" Congrats on the little one.

05-29-2013, 11:58 AM	#518
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Rustbuket 67 build "Georgia" Congrats on the kiddos dude!! __________________ Scott 93 crew cab build Project 62

05-29-2013, 01:56 PM	#519
Mustard72 Registered User Join Date: Jul 2012 Location: Ladysmith, WI Posts: 641	Re: Rustbuket 67 build "Georgia" Congrats, Dan. Pretty big month you've had. __________________ Nick Old Mustard, 1972 Chevy C20, 350, TH350, 4.10 Dana 60 rear, owned since I was 16 in 1986 http://67-72chevytrucks.com/vboard/s...d.php?t=545356 Blue Bell, 1987 K20, 6.2L Diesel, TH400/NP208, 4.10 gears Ustahav 1976 K10, 350/350/203, Gov Loc, Yooper beater trail truck.



Register or Log In To remove these advertisements.

05-29-2013, 05:54 PM	#520
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Rustbuket 67 build "Georgia" Wow thanks for all the congrats etc. he is a great baby, much calmer than our daughter when she was a newborn. We are blessed with such great kids and sooooo happy we got one of each I picked out a car for him already.... Sent this pic to paw paw Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

05-29-2013, 07:20 PM	#521
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Rustbuket 67 build "Georgia" Now that's stylin and profilin Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

05-29-2013, 11:28 PM	#522
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Rustbuket 67 build "Georgia" Start 'em out young....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

05-30-2013, 06:50 PM	#523
TchncnDen Registered User Join Date: Apr 2012 Location: Denver, CO Posts: 232	Re: Rustbuket 67 build "Georgia" Wooooohooooooo!!!! Mini Mohawk man and a new corvette, very nice. Congrats Dan! __________________ Another 71 My truck In tank fuel pump how to LS factory gauges wiring how to-post 18

Register or Log In To remove these advertisements.