Project Grande Slam: Coley's Hot Rod Shop - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CC69Rat · 07-22-2012, 10:16 PM

Guess the TT2s are out .. They wont fit over my brakes.

http://67-72chevytrucks.com/vboard/s...d.php?t=319406

**lolife99** · 07-22-2012, 10:54 PM

You might contact SCOTI,... but if I remember correctly,... his old TTII's were and 18/20 combo.
I can't believe a 20" TorqThrust II, up front, wouldn't fit over those brakes

CC69Rat · 07-23-2012, 06:34 AM

Maybe its the spoke design and not the diameter? His ad ( from 2008 I noticed ) mentioned the 20x8.5 fronts. (??) Ill pm him to find out.

Maybe the spokes wont clear the calipers?
Posted via Mobile Device

gringoloco · 07-23-2012, 09:39 AM

It's a combination of both. C5 and CTSV upgrades have the same issues. Hoop clearance should be fine with 20s, but 17-18s have issues. The McGaughys kit uses the C4 HD rotor, which has a deeper offset than the C5 to help with spoke clearance. Unfortunately, the truck caliper is huge. I'm having the same issues with my Streeters, but the Coys should fit...
Posted via Mobile Device

CC69Rat · 07-23-2012, 10:18 AM

Makes me a bit concerned about ordering billets..

Pro Performance · 07-23-2012, 10:22 AM

Quote:

Originally Posted by CC69Rat

Makes me a bit concerned about ordering billets..

Sometimes ordering wheels can be frustrating. Some billet manufacturers have wheels with larger rear pads, to clear brake systems with higher than usual caliper offsets. Some can adjust the pads to wherever you need.

I think you are right, it probably didn't fit due to spoke clearance.

darkhorse970 · 07-23-2012, 11:45 AM

Wow this info could put a whole new spin on my plans for wheels and future brake upgrade on my 68
Posted via Mobile Device

CC69Rat · 07-23-2012, 11:58 AM

Glad I could help you..

(just kiddin .. ) Sigh .. Nothing wrong with Coys IMO, I may just do C5s so I know they fit and run the hub spacers, I don't have to grind anything, etc. It could still look really good.

gringoloco · 07-23-2012, 02:52 PM

With the McGaughys BBK, you may luck out and not have to grind the hub. The issue comes only with the HD 1.25" rotors- not sure what they use for a hub, but it MIGHT clear...

VA72C10 · 07-23-2012, 05:25 PM

It's not the end of the world running the coys

The good thing is it will show the brakes nicely and of course we know they look great on our trucks

But I do like all the other options mentioned....as long as you can confirm fitment I think any of them are great choices!!!

CC69Rat · 07-23-2012, 05:43 PM

Noo.. the C5 is probably one of my all time favorites. I just want to make sure.
Posted via Mobile Device

Bennett68C10 · 07-23-2012, 09:32 PM

Chad I didn't have to grind the hubs to fit my Coys. The McGaugheys has a considerably smaller hub than stock rotors. Mine doesn't even stick out of the wheel.
Posted via Mobile Device

Bennett68C10 · 07-23-2012, 10:01 PM

Hey Chad one thing I thought of if your concerned about the fitment of billet wheels take one of your Billet Specialties Daggers and see if they fit over the calipers. I know billet specialties have a 1" mounting pad. If those fit you should be good with most billet wheels. Plus this would help me out too cause I have the same front brakes and have something up my sleeve lol
Posted via Mobile Device

gringoloco · 07-23-2012, 11:53 PM

Do you have a measurement from the mounting surface to the caliper face? How far does it stick out? Wish McGaughys provided a fitment template...
Posted via Mobile Device

mcmlxix · 07-24-2012, 01:49 AM

There are two wheels from Schott that you may like, just not sure on the price range...

Schott Modsport

Schott Octane

CC69Rat · 07-24-2012, 09:22 AM

I am going to install my drop stuff and just measure before I do anything else. Wheels or no wheels .. I want them to be right.

It will be a few weeks before I can drive it anyway as I can't mount my seats just yet. The covers are on backorder. I think I have a plan to modify the brackets and drop them about 1". My black buckets sit really nice in this truck but I think if they were about an inch lower it would be perfect. (for my height)

7dee2 · 07-24-2012, 10:53 AM

Quote:

Originally Posted by CC69Rat

I am going to install my drop stuff and just measure before I do anything else. Wheels or no wheels .. I want them to be right.

It will be a few weeks before I can drive it anyway as I can't mount my seats just yet. The covers are on backorder. I think I have a plan to modify the brackets and drop them about 1". My black buckets sit really nice in this truck but I think if they were about an inch lower it would be perfect. (for my height)

Good idea, measure twice (or 5x) order once. Also this way you can ask all the questions for your specific application (caliper, hub, etc.)..

Very interested to see what you come up with for mounting your seats. I thought you looked stylin sitting on the floor peeking over the dash.

CC69Rat · 07-24-2012, 10:59 AM

One of the forum members PM'ed me and said Centerline would make that Bolevard wheel in a soft lip. I am intregued .. but I want it all at ride height first to measure center bore, backspacing, caliper, etc.

CC69Rat · 07-26-2012, 12:18 PM

Some pics of the progress in he bed.

When I bought the truck it had some type of bedliner in it? Not sure what it was exactly but it was peeling up and rusty underneath it. Dad and I are in the process of removing it to scuff and repaint it black. I'm going to knock a majority of it off with a DA and 80/120 and re-epoxy, prime, etc. Just bring it back as best I can. Anything will look better than the silver flaky stuff. Post #120 has more pics.

Here's where we are now. And the before picture. .. The bedsides look really good on the edges, and the black paint looks original to me.

It's coming along but man this stuff is a pain.

**lolife99** · 07-26-2012, 12:23 PM

How nice is the steel bed floor?
I'd like to have it if you weren't so far away,...

CC69Rat · 07-26-2012, 12:31 PM

It is really bad at the front edge and back pass side near the tailgate. (Baseball size holes) It's pretty rusty around the wheel well bolt holes too. ..

By far, my least favorite part of the truck. I hate even looking at it.

shawno72 · 07-26-2012, 12:41 PM

Quote:

Originally Posted by CC69Rat

It is really bad at the front edge and back pass side near the tailgate. (Baseball size holes) It's pretty rusty around the wheel well bolt holes too. ..

By far, my least favorite part of the truck. I hate even looking at it.

Makes me miss the one out my 72 Longbed
Name: 5I85Ld5M73E53K13H6c7117d8276d9f3a14bd.jpg
Views: 1096
Size: 53.5 KB

CC69Rat · 07-27-2012, 11:04 AM

Okay , .. ok..

Intro Flow ? Likey or no ?

**67cheby** · 07-27-2012, 11:06 AM

its OK...dont love it , dont hate it !

**cericd** · 07-27-2012, 11:51 AM

I second that.

07-22-2012, 10:16 PM	#501
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Guess the TT2s are out .. They wont fit over my brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=319406 __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-22-2012, 10:54 PM	#502
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Project Grande Slam: Coley's Hot Rod Shop You might contact SCOTI,... but if I remember correctly,... his old TTII's were and 18/20 combo. I can't believe a 20" TorqThrust II, up front, wouldn't fit over those brakes __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-23-2012, 06:34 AM	#503
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Maybe its the spoke design and not the diameter? His ad ( from 2008 I noticed ) mentioned the 20x8.5 fronts. (??) Ill pm him to find out. Maybe the spokes wont clear the calipers? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-23-2012, 09:39 AM	#504
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Project Grande Slam: Coley's Hot Rod Shop It's a combination of both. C5 and CTSV upgrades have the same issues. Hoop clearance should be fine with 20s, but 17-18s have issues. The McGaughys kit uses the C4 HD rotor, which has a deeper offset than the C5 to help with spoke clearance. Unfortunately, the truck caliper is huge. I'm having the same issues with my Streeters, but the Coys should fit... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

07-23-2012, 10:18 AM	#505
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Makes me a bit concerned about ordering billets.. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-23-2012, 11:45 AM	#507
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,105	Re: Project Grande Slam: Coley's Hot Rod Shop Wow this info could put a whole new spin on my plans for wheels and future brake upgrade on my 68 Posted via Mobile Device __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

07-23-2012, 11:58 AM	#508
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Glad I could help you.. (just kiddin .. ) Sigh .. Nothing wrong with Coys IMO, I may just do C5s so I know they fit and run the hub spacers, I don't have to grind anything, etc. It could still look really good. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-23-2012, 02:52 PM	#509
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Project Grande Slam: Coley's Hot Rod Shop With the McGaughys BBK, you may luck out and not have to grind the hub. The issue comes only with the HD 1.25" rotors- not sure what they use for a hub, but it MIGHT clear... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 07-23-2012 at 03:07 PM.

07-23-2012, 05:25 PM	#510
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Grande Slam: Coley's Hot Rod Shop It's not the end of the world running the coys The good thing is it will show the brakes nicely and of course we know they look great on our trucks But I do like all the other options mentioned....as long as you can confirm fitment I think any of them are great choices!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-23-2012, 05:43 PM	#511
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Noo.. the C5 is probably one of my all time favorites. I just want to make sure. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-23-2012, 09:32 PM	#512
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project Grande Slam: Coley's Hot Rod Shop Chad I didn't have to grind the hubs to fit my Coys. The McGaugheys has a considerably smaller hub than stock rotors. Mine doesn't even stick out of the wheel. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-23-2012, 10:01 PM	#513
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project Grande Slam: Coley's Hot Rod Shop Hey Chad one thing I thought of if your concerned about the fitment of billet wheels take one of your Billet Specialties Daggers and see if they fit over the calipers. I know billet specialties have a 1" mounting pad. If those fit you should be good with most billet wheels. Plus this would help me out too cause I have the same front brakes and have something up my sleeve lol Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-23-2012, 11:53 PM	#514
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Project Grande Slam: Coley's Hot Rod Shop Do you have a measurement from the mounting surface to the caliper face? How far does it stick out? Wish McGaughys provided a fitment template... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

07-24-2012, 01:49 AM	#515
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Project Grande Slam: Coley's Hot Rod Shop There are two wheels from Schott that you may like, just not sure on the price range... Schott Modsport Schott Octane __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

07-24-2012, 09:22 AM	#516
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop I am going to install my drop stuff and just measure before I do anything else. Wheels or no wheels .. I want them to be right. It will be a few weeks before I can drive it anyway as I can't mount my seats just yet. The covers are on backorder. I think I have a plan to modify the brackets and drop them about 1". My black buckets sit really nice in this truck but I think if they were about an inch lower it would be perfect. (for my height) __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

07-24-2012, 10:59 AM	#518
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop One of the forum members PM'ed me and said Centerline would make that Bolevard wheel in a soft lip. I am intregued .. but I want it all at ride height first to measure center bore, backspacing, caliper, etc. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-26-2012, 12:18 PM	#519
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Some pics of the progress in he bed. When I bought the truck it had some type of bedliner in it? Not sure what it was exactly but it was peeling up and rusty underneath it. Dad and I are in the process of removing it to scuff and repaint it black. I'm going to knock a majority of it off with a DA and 80/120 and re-epoxy, prime, etc. Just bring it back as best I can. Anything will look better than the silver flaky stuff. Post #120 has more pics. Here's where we are now. And the before picture. .. The bedsides look really good on the edges, and the black paint looks original to me. It's coming along but man this stuff is a pain. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-26-2012, 12:23 PM	#520
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Project Grande Slam: Coley's Hot Rod Shop How nice is the steel bed floor? I'd like to have it if you weren't so far away,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-26-2012, 12:31 PM	#521
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop It is really bad at the front edge and back pass side near the tailgate. (Baseball size holes) It's pretty rusty around the wheel well bolt holes too. .. By far, my least favorite part of the truck. I hate even looking at it. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-27-2012, 11:04 AM	#523
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Okay , .. ok.. Intro Flow ? Likey or no ? Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-27-2012, 11:06 AM	#524
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project Grande Slam: Coley's Hot Rod Shop its OK...dont love it , dont hate it ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-27-2012, 11:51 AM	#525
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,158	Re: Project Grande Slam: Coley's Hot Rod Shop I second that.

Register or Log In To remove these advertisements.