What did you do to your truck today? Chapter II - Page 212 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChaseBBC · 05-06-2017, 11:54 AM

keep forgetting to do that...sorry

Metaldoc · 05-06-2017, 02:41 PM

The plan is working out with some assembly required.

mud.man.rj · 05-06-2017, 05:38 PM

Now that's a good tire plan, good one.
Mudman.

**Boog** · 05-06-2017, 07:54 PM

That low bed mount spare tire is a real good idea. I like it. How is it working out underneath? That must be a long bed.

Metaldoc · 05-06-2017, 08:22 PM

Quote:

Originally Posted by mud.man.rj

Now that's a good tire plan, good one.
Mudman.

Quote:

Originally Posted by Boog

That low bed mount spare tire is a real good idea. I like it. How is it working out underneath? That must be a long bed.

Thanks it's a long bed. I've done a lot of mods to make it work my bed is custom to start with. All the parts are drying now tomorrow it will be installed.

jessemthompson · 05-06-2017, 10:11 PM

Tinted the windows in preparation of me charging my AC.

hdff · 05-07-2017, 09:40 AM

took Wanda and the corvette to a small car show . Both won 1st in their class.. Thanks Exxon for the invite

**paul blair** · 05-07-2017, 11:10 AM

Yellow Blue and You--SMILES all around! The Vette and Wanda look Happy and Proud to be G.M. Thanks for sharing!

Metaldoc · 05-07-2017, 01:48 PM

Wheel tub in and it looks great, like it was meant to be there. The bottom of the tub is about an 1 1/2" above the fender side and the tire is an inch below the top.

toolboxchev · 05-07-2017, 03:11 PM

Quote:

Originally Posted by Metaldoc

Wheel tub in and it looks great, like it was meant to be there. The bottom of the tub is about an 1 1/2" above the fender side and the tire is an inch below the top.

That is pretty trick. I especially like that you did that with the wood bed and making the custom look almost stock in appearance.

Metaldoc · 05-07-2017, 05:08 PM

Quote:

Originally Posted by toolboxchev

That is pretty trick. I especially like that you did that with the wood bed and making the custom look almost stock in appearance.

Thanks it was what I was going for. The boards are composite decking.

Andy4639 · 05-07-2017, 06:36 PM

3 year old water pump failed. Replaced it with a new one from O-Rielly's. New thermistat and hoses.
I also polished under the hood.

KQQL IT · 05-07-2017, 08:41 PM

Hooked up 12v to the choke.
Installed rebuilt radiator, radiator shop said it is a continuous fin 4 row industrial type.
Will outlast the truck.

OregonNed · 05-09-2017, 10:09 PM

Finished up my oil pressure line tonight. A big shout out to members LockDoc (for the line kit and needed adapter) and TBONE1964 (for an excellent working replacement oil pressure gauge). Everything went together easy and fixed a small oil leak in the process. So nice to get the stock gauges working and and being able to pull out the cheap three gauge under dash panel. Pic is oil gauge at idle.

Metaldoc · 05-12-2017, 05:10 AM

Finished the hold down for the new spare wheel tub.

ghalperin · 05-12-2017, 09:59 AM

I put my frame on a rotisserie and sprayed it.

Name: IMG_6673.jpg
Views: 558
Size: 56.7 KB

**paul blair** · 05-12-2017, 06:59 PM

Nice Job--I like Your rotisserie!

66clow · 05-12-2017, 07:01 PM

Installed 2in drop spindles. Now the front is at 5. Gotta put on the c notch to go to 7 on rear. Although I knew the 45 series was too tall I barely got it home lol. Will be looking for some 40 series tires.

ghalperin · 05-12-2017, 07:40 PM

Quote:

Originally Posted by paul blair

Nice Job--I like Your rotisserie!

I also used Harbor Freight's disposable spray gun. $9.99 and you don't have to waste time trying to maybe get the epoxy out of it. I removed the air fitting and it went straight in the trash.

Name: IMG_6681.jpg
Views: 577
Size: 55.6 KB

Name: IMG_6681.jpg
Views: 577
Size: 55.6 KB

**paul blair** · 05-12-2017, 08:06 PM

Quote:

Originally Posted by ghalperin

I also used Harbor Freight's disposable spray gun. $9.99 and you don't have to waste time trying to maybe get the epoxy out of it. I removed the air fitting and it went straight in the trash.

Attachment 1651454

Good Idea! CHEEP TRICKS material. You are off to a good start!

Metaldoc · 05-13-2017, 02:02 AM

Like it came from factory or some crazy idea.

72LB · 05-13-2017, 07:06 AM

Quote:

Originally Posted by Metaldoc

Like it came from factory or some crazy idea.

I've been wondering what to do with my spare, I like it.

Me going to pick up a steering column and getting a start on putting it in.

NoStopN · 05-13-2017, 05:18 PM

I changed the earl & filter in mine. And I did the same for the other 2 in the fleet as well. That's a lot of lubrication to take back to be recycled.

**Oregon 1967 GMC** · 05-13-2017, 07:42 PM

With Boris' help we got the Steering Wheel off and will start to refurbish it.

**paul blair** · 05-13-2017, 09:03 PM

Cleaned and painted rims yesterday. New 31/10.50 TIRES today!

05-06-2017, 11:54 AM	#5276
ChaseBBC Registered User Join Date: Apr 2017 Location: Hammond, La. Posts: 51	Re: What did you do to your truck today? Chapter II keep forgetting to do that...sorry Attached Images

05-06-2017, 02:41 PM	#5277
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II The plan is working out with some assembly required. Attached Images

05-06-2017, 05:38 PM	#5278
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? Chapter II Now that's a good tire plan, good one. Mudman. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

05-06-2017, 07:54 PM	#5279
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,459	Re: What did you do to your truck today? Chapter II That low bed mount spare tire is a real good idea. I like it. How is it working out underneath? That must be a long bed. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

05-06-2017, 10:11 PM	#5281
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 960	Re: What did you do to your truck today? Chapter II Tinted the windows in preparation of me charging my AC.

05-07-2017, 09:40 AM	#5282
hdff Registered User Join Date: Apr 2007 Location: pasadena,TEXAS Posts: 880	Re: What did you do to your truck today? Chapter II took Wanda and the corvette to a small car show . Both won 1st in their class.. Thanks Exxon for the invite Attached Images __________________ 1971 Cheyenne SWB 402BB, 700R4, 3.73 posi, PS, PB, A/C, Tilt, Tach "Wanda" Don't argue with idiots, People watching may not be able to tell the difference... There's someone in my head........But it's not me...... cheap tricks thread great info here!! http://67-72chevytrucks.com/vboard/s...d.php?t=489394

05-07-2017, 11:10 AM	#5283
paul blair Senior Member Join Date: Jan 2016 Location: massachusetts Posts: 329	Re: What did you do to your truck today? Chapter II Yellow Blue and You--SMILES all around! The Vette and Wanda look Happy and Proud to be G.M. Thanks for sharing!

05-07-2017, 01:48 PM	#5284
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II Wheel tub in and it looks great, like it was meant to be there. The bottom of the tub is about an 1 1/2" above the fender side and the tire is an inch below the top. Attached Images

05-07-2017, 06:36 PM	#5287
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What did you do to your truck today? Chapter II 3 year old water pump failed. Replaced it with a new one from O-Rielly's. New thermistat and hoses. I also polished under the hood. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

05-07-2017, 08:41 PM	#5288
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,238	Re: What did you do to your truck today? Chapter II Hooked up 12v to the choke. Installed rebuilt radiator, radiator shop said it is a continuous fin 4 row industrial type. Will outlast the truck. __________________ " That didnt make it any newer " " Dont antique the equipment "

05-09-2017, 10:09 PM	#5289
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II Finished up my oil pressure line tonight. A big shout out to members LockDoc (for the line kit and needed adapter) and TBONE1964 (for an excellent working replacement oil pressure gauge). Everything went together easy and fixed a small oil leak in the process. So nice to get the stock gauges working and and being able to pull out the cheap three gauge under dash panel. Pic is oil gauge at idle. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

05-12-2017, 05:10 AM	#5290
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II Finished the hold down for the new spare wheel tub. Attached Images

05-12-2017, 09:59 AM	#5291
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: What did you do to your truck today? Chapter II I put my frame on a rotisserie and sprayed it. __________________ Glenn 1960 Burro Corvair/VW Buggy - Factory made in Santa Ana, Ca 1929 Ford Model A Roadster - traditional pre-war banger hot rod

05-12-2017, 06:59 PM	#5292
paul blair Senior Member Join Date: Jan 2016 Location: massachusetts Posts: 329	Re: What did you do to your truck today? Chapter II Nice Job--I like Your rotisserie!

05-12-2017, 07:01 PM	#5293
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today? Chapter II Installed 2in drop spindles. Now the front is at 5. Gotta put on the c notch to go to 7 on rear. Although I knew the 45 series was too tall I barely got it home lol. Will be looking for some 40 series tires. Last edited by 66clow; 05-12-2017 at 07:25 PM.



Register or Log In To remove these advertisements.

05-13-2017, 02:02 AM	#5296
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II Like it came from factory or some crazy idea. Attached Images

05-13-2017, 05:18 PM	#5298
NoStopN Registered User Join Date: Jul 2016 Location: Murfreesboro, TN Posts: 229	Re: What did you do to your truck today? Chapter II I changed the earl & filter in mine. And I did the same for the other 2 in the fleet as well. That's a lot of lubrication to take back to be recycled. __________________ 1969 GMC 2500. 250 I6, 4-speed w/ granny low

05-13-2017, 07:42 PM	#5299
Oregon 1967 GMC Senior Member Join Date: Jan 2014 Location: Portland, Oregon Posts: 440	Re: What did you do to your truck today? Chapter II With Boris' help we got the Steering Wheel off and will start to refurbish it. Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

05-13-2017, 09:03 PM	#5300
paul blair Senior Member Join Date: Jan 2016 Location: massachusetts Posts: 329	Re: What did you do to your truck today? Chapter II Cleaned and painted rims yesterday. New 31/10.50 TIRES today! Attached Images

Register or Log In To remove these advertisements.