What did you do today not on your truck...

[4u2nv]

Not the season yet but I got the sea-doo all shiny yesterday
Also a custom aftermarket decal kit

[Lost in the 60's]

Originally Posted by sakustoms

Finally seam sealed and painted the dash/firewall in my kids Camaro.

upload pictures url

That looks great. I had to replace the outer/inner cowl and dash top on mine over the past few months. I had NO idea the car had this much rot under the windshield and I've owned it for 15 years. It was all hidden under the glass and urethane sealer.





Bought a 1 piece outer/inner assembly from OER and it fit really well, for a repop. The cut is all hidden under the cowl grille when done.



Fitting the new dash top. It's all done now and ready for primer. I need to get a pic of that.

[Lost in the 60's]

Originally Posted by special-K

My wheelbarrow had an accident that broke one handle. Being the thrifty Handy Andy guy I am, I decided the wheelbarrow has plenty of life in it so I'll make new handles. They're still in an uncompleted state, but this is how far I got yesterday afternoon. I might still make the grab handles smaller and round like original, but as they are they have a good feel for my hands. I want to paint the wood black and thinking maybe sandblast the metal and paint Cat yellow, just for kicks. Maybe get some Caterpillar stickers

Being I work with metal, I would have grabbed 3 ft of 1 1/2" angle iron, cut it in half, drilled some holes and had the original handle back in operation in 30 minutes...

[Lost in the 60's]

I had to gut the entire instrument panel and remove the dash top to weld the inner cowl section on the inside of the car.



Lots of short, stitch welds to prevent warping.

[72c20customcamper]

Cleaning up the area that the new shop is going . I really need to stack wood it’s all over the place . In the future I’ll be stacking in the car tent I’ll just take off both end walls to get ventilation

[LockDoc]

Originally Posted by 72c20customcamper

Cleaning up the area that the new shop is going . I really need to stack wood it’s all over the place . In the future I’ll be stacking in the car tent I’ll just take off both end walls to get ventilation

I think you are going to need a bigger car tent....
.

[72c20customcamper]

Originally Posted by LockDoc

I think you are going to need a bigger car tent....
.

Maybe

[Rickysnickers]

I needed a stool for the shop. Instead of buying one, I whipped this out in an afternoon. It's all scrap wood, so no cost

[LockDoc]

Originally Posted by Rickysnickers

I needed a stool for the shop. Instead of buying one, I whipped this out in an afternoon. It's all scrap wood, so no cost

-
Looks good, but I would really need about 2" of padding on the seat....

[72c20customcamper]

Made a good contact for wood . Local tree guy who doesn’t sell firewood so he gives it away . This is the second load I’ve gotten from him . Today he said he will call me exclusively when the customers want the wood removed . He takes all the softwoods to the dump . What’s even nicer is I didn’t have to touch the wood

[CG]

We had 13 good size alders taken down this week. They were on a hillside next to my shop. No big deal 20 some years ago when we moved in. But now some of em were very large and leaning more than I liked. The tree guy was fantastic. Cut em up in 16inch rounds, and did a fantastic clean up job.

Called a couple buddies, hey you guys want some wood? No hesitation, heck yeah. People like free wood.

[Boog]

Originally Posted by LockDoc

-
Looks good, but I would really need about 2" of padding on the seat....

Or 3 for my boney butt.
I have a nice stool that belonged to my dad that says Ford on it in big letters. I don't mind though. My butt can't read and I can't see it when I'm sitting on it.

[Steeveedee]

Originally Posted by CG

We had 13 good size alders taken down this week. They were on a hillside next to my shop. No big deal 20 some years ago when we moved in. But now some of em were very large and leaning more than I liked. The tree guy was fantastic. Cut em up in 16inch rounds, and did a fantastic clean up job.

Called a couple buddies, hey you guys want some wood? No hesitation, heck yeah. People like free wood.

I'm hoping that got put to use for projects as opposed to heat. I should move to tree country so that I can get wood for less money.

[72c20customcamper]

Originally Posted by Steeveedee

I'm hoping that got put to use for projects as opposed to heat. I should move to tree country so that I can get wood for less money.

Heating is probably one of the most expensive cost here in the northeast . Unless you have the tools to mill your own wood most mills won’t touch a yard tree . To many signs ,wire fencing and other things nailed and screwed into them . I’ve found climbing spikes completely encased in trees . Sometimes wood is destined to be firewood .

I’m going to mill parts of this maple . It was a yard tree but it’s got a huge burl on it so I’ll chance ruining an expensive ripping chain on it

[special-K]

Originally Posted by Rickysnickers

I needed a stool for the shop. Instead of buying one, I whipped this out in an afternoon. It's all scrap wood, so no cost

I like your style. I do the same, including hanging onto my scrap. I came to post about my wheelbarrow project. One of the handles got broken and it's still in great shape. In fact, I the original tube tire always needed air so I replaced it with an airless tire already. I grabbed a length of rough lumber and made two new handles better than original

[72c20customcamper]

Looks great Tim

[Rickysnickers]

Originally Posted by lockdoc

-
looks good, but i would really need about 2" of padding on the seat....

lol

[Rickysnickers]

Originally Posted by special-K

I like your style. I do the same, including hanging onto my scrap. I came to post about my wheelbarrow project. One of the handles got broken and it's still in great shape. In fact, I the original tube tire always needed air so I replaced it with an airless tire already. I grabbed a length of rough lumber and made two new handles better than original

Perfect

[special-K]

Originally Posted by 72c20customcamper

Looks great Tim

Originally Posted by Rickysnickers

Perfect

Thanks guys. All three of us do this same thing, so know the value in using whatchu got and the gratification from the results.

I'm a scavenger, too. Last week, at the end of the lane of the farmhouse I'm working on, and out by the road were the turned wood head and foot boards to a full size bed free for the taking. What a coincidence, because in the past couple weeks I decided a full size bed in one of my bedrooms could use a replacement. It has a few issues. I hauled the pieces home, looked up on one of my lumber racks for a pair of oak bedrails I wasn't sure I still had, and there they were. Filthy and needing a little work but usable, with hardware compatible with the head and foot. One thing the sideboards need are three of the four curvy pieces on the ends that help keep the bed from racking. I went to my 3-4' lumber stash and there was just the piece of oak I needed to make four new ones with a few inches left over

[Steeveedee]

Originally Posted by 72c20customcamper

Heating is probably one of the most expensive cost here in the northeast . Unless you have the tools to mill your own wood most mills won’t touch a yard tree . To many signs ,wire fencing and other things nailed and screwed into them . I’ve found climbing spikes completely encased in trees . Sometimes wood is destined to be firewood .

I’m going to mill parts of this maple . It was a yard tree but it’s got a huge burl on it so I’ll chance ruining an expensive ripping chain on it

Sorry if it seemed like I was bagging on you about the wood. I'm sure you've saved a lot of nice wood, given the projects you've posted here. I'll be interested in how that burl turns out.

[tutone]

Good scrap is worth holding on to. You never know what you might use it for. Still working on this shed and Chris had some Mississippi cypress from a barn built in 1915 by some of his in-laws. His MIL has a framed picture of her grandfather in the loft from 1920. We scavanged enoughso far to do the bathroom ceiling and linen closet ceiling. We wire brushed it and hand sanded it lightly. Turned out great.

[jerry moss]

man I feel like a lazy piece of sh!t, you guys really accomplished some cool projects, all I did was spray round-up on my dads and my weeds, that took me two days and no they are not large yards.

[Steeveedee]

^ Don't feel too bad. I woke up at some stupid early hour and couldn't get back to sleep. Surfing the net, fell asleep for 20 minutes in spite of 2 mugs of coffee. Fell asleep again later for about 30 minutes; woke up in time for mid-day dog feeding. I have lots to do around here, not getting it done. #old

[Boog]

Me too! And I don't have any dogs.

[special-K]

Originally Posted by tutone

Good scrap is worth holding on to. You never know what you might use it for. Still working on this shed and Chris had some Mississippi cypress from a barn built in 1915 by some of his in-laws. His MIL has a framed picture of her grandfather in the loft from 1920. We scavanged enoughso far to do the bathroom ceiling and linen closet ceiling. We wire brushed it and hand sanded it lightly. Turned out great.

Looks great! Cypress is great wood for rot resistance. We used to have big cypress in the swamps of the Eastern Shore. I never knew that until I did work on a friend's father's house that I built a front porch on. His brother owns a salvage lumber business and he supplied the 100+ year old railing and posts that were cypress harvested on the Eastern Shore. I still have one end of the top rail with the mortise tenon as a keepsake