How about some pics of 73-91 crew cabs

[Stump Puller]

No diagram. Just used a 4 wheel drive frame for a guide, measured everything several times & drilled holes as needed.
Has stock 2wd cross member with anything wider than the frame rails torched off & cleaned up. The cross member has the lower part torched off as well & it is only 1½-2 inches tall. If you want to run cross over steering a small part of the center forward most part will need trimmed. Removed stock body mount/rad support brackets & installed ones from a 4x4. On a 1 ton there is a sliver of the frame that must be cut off to allow the shackle to swing. On the rear I removed all 2wd brackets & installed 4wd ones.
Really easy, have done several now

[1968vetL-71]

Nekkidhillbilly, didn't you say "Basically if you can use a drill and find a used 4wd, it will work". Lol . Just messing with ya. There is no diagram. Like he said, lots of measuring and minor trimming on frame in spots. If you pm me an email address, I'll send ya some detailed pics on what I did on my conversion.

[Mr Pops]

My 89 with some 07 wheels

[nekkidhillbilly]

Originally Posted by 1968vetL-71

Nekkidhillbilly, didn't you say "Basically if you can use a drill and find a used 4wd, it will work". Lol . Just messing with ya. There is no diagram. Like he said, lots of measuring and minor trimming on frame in spots. If you pm me an email address, I'll send ya some detailed pics on what I did on my conversion.

well yes but id like to have something on which holes needed. the next one i build is going to be duramax and im going to use a ford axle to keep the allison and tc in tact. mine will be a mix match or parts rather than direct swap off a 4x4 to a 2wd. if that makes sense. ive been around swapped half tons so i know it wouldnt be hard. truck will be a total frame off and will be another year before i undergo this. just getting ducks in a row. also i meant that toward the guy like it wasnt impossible to do as some ppl where acting like in his. i know your busting my chops though i appreciate it.

[FlossyB]

Beautiful truck Mr. Pops.

[Mr Pops]

Originally Posted by FlossyB

Beautiful truck Mr. Pops.

Thank you very much

[Anchorism]

Originally Posted by Mr Pops

Thank you very much

Im guessing your truck is 2wd.... Ever have any problems running in the snow with that rig? Is it good for dd duties?

[TheBlueBomber]

Here's one I saw at Northern Tool today.

[S_Stewart11]

Hey guys, brand new member here from NW Ohio. I love these old trucks! Really wanting to own a CCSB soon. Does anybody know where I can look for one that has most of the hard labor done? I'll be honest, I'm not mechanic but I can do most of the cosmetic work. Any help would be greatly appreciated!

P.S. I am a motivated buyer!

[nekkidhillbilly]

you will just have to find one someone has already cut up. i hate to see the trucks cut up but each his own.

[S_Stewart11]

http://nashville.craigslist.org/cto/4348805500.html

Here is one for sale that has most of the work done, it just needs completely assembled. Everything is there, just a lot of labor in putting it back together. The engine is/was being taken out for a swap, so I cannot hear it run before a purchase which scares me somewhat. Any ideas from guys with experience?

[Devillusion]

Way to much money....and the 60 is gone. For that money and work you'd be better off finding a running stock truck and pay someone to shorten the frame for you in my opinion. A lot of work to be done especially when someone else has disassembled it already.

Nightmare. Worth $800-1000 tops!

[S_Stewart11]

Devillusion,

Thanks for confirming what I was already thinking! I called the guy on it and he thinks it's in great shape but needs a whole list of work done... Plus it saves me a 7 hour trip to TN just to look at it. I'd love to find a project truck to start working on. I've got cabin fever and am ready to build something this spring.

[Mr Pops]

Originally Posted by Anchorism

Im guessing your truck is 2wd.... Ever have any problems running in the snow with that rig? Is it good for dd duties?

Yes, 2wd. I plan on adding a limited slip and some better tires for next winter. I also own a 4x4 version of this which I use for actual work truck stuff. I don't plan on taking this one off pavement.

[1968vetL-71]

If anyone needs a truck (or classic car ) looked at in or around the Nashville area let me know. I would be glad to do it too help a fellow enthusiast out, no problem. I've owned several and definitely know what too look for. Yes the ccsb on Craig's is a hack job missing the only thing (d60) that would make it worth a 1/3 of what he's asking. Same owner I think owns a 72 burb he's been trying to sell on Craig's for couple years now. It's junk as well and wants an obsurd price. He thinks those butt-ugly red rock stars are gonna make it happen.

[Flatpat]

Originally Posted by 1968vetL-71

If anyone needs a truck (or classic car ) looked at in or around the Nashville area let me know. I would be glad to do it too help a fellow enthusiast out, no problem. I've owned several and definitely know what too look for. Yes the ccsb on Craig's is a hack job missing the only thing (d60) that would make it worth a 1/3 of what he's asking. Same owner I think owns a 72 burb he's been trying to sell on Craig's for couple years now. It's junk as well and wants an obsurd price. He thinks those butt-ugly red rock stars are gonna make it happen.

Oh those rims are hideous!

[S_Stewart11]

Originally Posted by 1968vetL-71

If anyone needs a truck (or classic car ) looked at in or around the Nashville area let me know. I would be glad to do it too help a fellow enthusiast out, no problem. I've owned several and definitely know what too look for. Yes the ccsb on Craig's is a hack job missing the only thing (d60) that would make it worth a 1/3 of what he's asking. Same owner I think owns a 72 burb he's been trying to sell on Craig's for couple years now. It's junk as well and wants an obsurd price. He thinks those butt-ugly red rock stars are gonna make it happen.

I called him Wednesday morning for more information on it and was really disappointed with it needing completely assembled. He told me to make an offer around $2300 or else he's swapping a LS 4.8 full drivetrain "making it a 7 or 8k dollar truck" I'm really glad I joined this forum to get some answers before I wasted time and money for that truck. Guess I'll keep looking for a CCSB...

P.S. He sold the rockstar rims!

[Anchorism]

Originally Posted by S_Stewart11

I called him Wednesday morning for more information on it and was really disappointed with it needing completely assembled. He told me to make an offer around $2300 or else he's swapping a LS 4.8 full drivetrain "making it a 7 or 8k dollar truck" I'm really glad I joined this forum to get some answers before I wasted time and money for that truck. Guess I'll keep looking for a CCSB...

P.S. He sold the rockstar rims!

Well at lease the rockstar rims being gone will improve his value.... HA!!!

[nekkidhillbilly]

Originally Posted by 1968vetL-71

If anyone needs a truck (or classic car ) looked at in or around the Nashville area let me know. I would be glad to do it too help a fellow enthusiast out, no problem. I've owned several and definitely know what too look for. Yes the ccsb on Craig's is a hack job missing the only thing (d60) that would make it worth a 1/3 of what he's asking. Same owner I think owns a 72 burb he's been trying to sell on Craig's for couple years now. It's junk as well and wants an obsurd price. He thinks those butt-ugly red rock stars are gonna make it happen.

hey did you ever get my email? thanks again man.

[Mr.Butters]

Found this beautiful rig for sale on eBay. 1987 Chevy K30 w/350 and 4 speed. 21,000 original miles, old fire truck! Here's the link: http://www.ebay.com/itm/Chevrolet-Ot...US_Cars_Trucks

[Chevy3+3]

That's sweet Mr. Butters! Be interesting to see what it brings. Or is it a set price?

[joe231]

Originally Posted by Mr.Butters

Found this beautiful rig for sale on eBay. 1987 Chevy K30 w/350 and 4 speed. 21,000 original miles, old fire truck! Here's the link:

Nice truck....
But it isn't a crew cab

[meatwagon83]

Originally Posted by joe231

Nice truck....
But it isn't a crew cab

thats what i was going to say

[Mr.Butters]

Fixed price: $23,995.00. 15 days left

[anubisani]

1988



[/b]