Hazel the older Sister.... - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 07-08-2010, 06:41 AM

Quote:

Originally Posted by aggie91

oh, that's not right....

x2 dont keep a 67 man down you know how it is

cstm68 · 07-08-2010, 12:52 PM

Quote:

Originally Posted by kart34

Were did you buy the fenders? may need some asap

i got mine at sixrobblees.com

1LoC10 · 07-28-2010, 05:09 PM

is it done yet?

n2billet · 07-29-2010, 06:07 PM

Quote:

Originally Posted by 1LoC10

is it done yet?

Nope, it's on hold again.........going to try and get the 71 stepside together before the end of next month......more than likely that will not happen as well.

OARNGESI · 07-29-2010, 09:53 PM

Whats the plans for the stepside

n2billet · 07-29-2010, 10:16 PM

Quote:

Originally Posted by OARNGESI

Whats the plans for the stepside

Porterbuilt's new mild drop front and tubular rear with 20/22's Coys.

Alvin · 07-30-2010, 08:11 AM

Quote:

Originally Posted by n2billet

Porterbuilt's new mild drop front and tubular rear with 20/22's Coys.

Ya know, it really makes me sad that Porterbuilt wasn't around back when I had money to spend on these kinds of things

Can't wait to see the stepside, I know it will look killer!

SCOTI · 07-30-2010, 10:51 AM

Quote:

Originally Posted by Alvin

Ya know, it really makes me sad that Porterbuilt wasn't around back when I had money to spend on these kinds of things

Can't wait to see the stepside, I know it will look killer!

He's still around! Start planning now.....

m6z · 07-30-2010, 01:50 PM

Quote:

Originally Posted by n2billet

Porterbuilt's new mild drop front and tubular rear with 20/22's Coys.

Wow. 2 projects full of Porterbuilt parts. Can't wait to see both of them finished.

SCOTI · 07-30-2010, 03:27 PM

Quote:

Originally Posted by m6z

Wow. 2 projects full of Porterbuilt parts. Can't wait to see both of them finished.

Actually, he has a square body that's got PB F/R set-up as well....

VA72C10 · 07-30-2010, 04:16 PM

Quote:

Originally Posted by SCOTI

Actually, he has a square body that's got PB F/R set-up as well....

and that is where I start having the problem with the "thou shalt not covet" commandment

**67cheby** · 07-30-2010, 04:26 PM

Aint right i tell you just aint right !!!!

67chevy1series · 07-30-2010, 05:13 PM

why does he always find the colest trucks

SCOTI · 07-30-2010, 09:41 PM

Quote:

Originally Posted by 67chevy1series

why does he always find the colest trucks

He's not the only one that finds them.... just the 1st to the bank!

67chevy1series · 07-30-2010, 10:45 PM

OARNGESI · 07-30-2010, 11:36 PM

Quote:

Originally Posted by scoti

actually, he has a square body that's got pb f/r set-up as well....

is there a thread

SCOTI · 07-31-2010, 01:25 AM

Quote:

Originally Posted by OARNGESI

is there a thread

Some pics floating around from several years ago but there's no build thread.

abebummy26 · 10-24-2010, 11:05 AM

I love that truck, awesome colors, good options, great patina, great stance, and a builder with amazing attention to detail. What you did to that door is art. Did you just hammer and dolly it? What are your plans for the bed floor? Are you going to cut it?

n2billet · 10-24-2010, 01:33 PM

Quote:

Originally Posted by abebummy26

I love that truck, awesome colors, good options, great patina, great stance, and a builder with amazing attention to detail. What you did to that door is art. Did you just hammer and dolly it? What are your plans for the bed floor? Are you going to cut it?

Thank you very much..I've been working very slowly these last few months due to my work schedule but I have done a few things. I cut up a new Wilwood master cylinder and slicked-painted it, got the carpet installed, made all the A/C lines (found out that I made the opening above the inner fender 1/4 to small for the fitting, so the last hose end gets installed on the truck with the fender on.) I started making a box that goes behind the engine and sits on top of the tranny for the PCV and breather (closed valve covers so I need the ventilation) I will paint all this black so it will help hide it. I bought a four post lift this week so next on the list is to start making all the brake and fuel lines and start on the exhaust (been putting off grinding the manifolds but it needs to get done) I also bought all the fittings so I can make the heater hoses in hard line inside the truck so I can run them outside through the modified heater box I made (almost a year ago) The "dream" is to have it on the ground with the Porterbuilt rear kit installed, front sheet metal installed (for the last time) sitting on it's new wheels and tires before 2011........then again it just a dream.

SCOTI · 10-24-2010, 02:13 PM

Keith,

That's what I was talking about on the VC 'tubes'. I was going to try & get them higher on the VC corner to keep liquids as far away as possible & hopefully help limit warpage when welding. Did it want to warp w/them centered?

You need a pic of an 'as is' Wilwood MC so people can see how yours has been massaged.

n2billet · 10-24-2010, 02:51 PM

Quote:

Originally Posted by SCOTI

Keith,

That's what I was talking about on the VC 'tubes'. I was going to try & get them higher on the VC corner to keep liquids as far away as possible & hopefully help limit warpage when welding. Did it want to warp w/them centered?

You need a pic of an 'as is' Wilwood MC so people can see how yours has been massaged.

The tubes going into the VC I built a baffle into them to limit the oil from getting into the air box. As far as them wanting to warp, my tubes are all the way to lip of the covers and only spotted at the moment. I ran the temp as low as I could on the tig and kept cooling them off with a wet rag.

SCOTI · 10-24-2010, 03:55 PM

I need to swing by & check them out.

72BlckButy · 10-24-2010, 03:57 PM

Awesome work n2billet!

jwalk · 10-24-2010, 04:19 PM

Looking good! That master cylinder looks sweet!

**lolife99** · 10-24-2010, 07:28 PM

Looks very nice,... like always.

07-28-2010, 05:09 PM	#528
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Hazel the older Sister.... is it done yet? __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

07-29-2010, 09:53 PM	#530
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Hazel the older Sister.... Whats the plans for the stepside __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

07-30-2010, 04:26 PM	#537
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... Aint right i tell you just aint right !!!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-30-2010, 05:13 PM	#538
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... why does he always find the colest trucks

07-30-2010, 10:45 PM	#540
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister....

10-24-2010, 11:05 AM	#543
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: Hazel the older Sister.... I love that truck, awesome colors, good options, great patina, great stance, and a builder with amazing attention to detail. What you did to that door is art. Did you just hammer and dolly it? What are your plans for the bed floor? Are you going to cut it? __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.

10-24-2010, 02:13 PM	#545
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: Hazel the older Sister.... Keith, That's what I was talking about on the VC 'tubes'. I was going to try & get them higher on the VC corner to keep liquids as far away as possible & hopefully help limit warpage when welding. Did it want to warp w/them centered? You need a pic of an 'as is' Wilwood MC so people can see how yours has been massaged. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-24-2010, 03:55 PM	#547
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: Hazel the older Sister.... I need to swing by & check them out. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-24-2010, 03:57 PM	#548
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hazel the older Sister.... Awesome work n2billet! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-24-2010, 04:19 PM	#549
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Hazel the older Sister.... Looking good! That master cylinder looks sweet! __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

10-24-2010, 07:28 PM	#550
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Hazel the older Sister.... Looks very nice,... like always. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.