Lost My 65 - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LostMy65 · 11-13-2015, 08:54 PM

Driveshaft came today.

LostMy65 · 11-27-2015, 07:30 PM

I haven't been very motivated lately because of the cold.
Hacked in an old cast-iron wood stove I got for free.
Sit down and take a break next to a nice warm stove. :-)

66-PMD-GMC · 11-27-2015, 07:39 PM

Wood burning stove...
Sweet warmth of a lovely fire...
Nothing better during a work break..

**Captainfab** · 11-28-2015, 12:08 AM

Boy that looks like an oldie.

If you have uninsulated pipe outside, keep an eye on it for creasote buildup.

LostMy65 · 11-30-2015, 09:30 PM

Having a warm stove motivated me to button up a couple oil leaks I found.
Got help for fixing the cam plug leak here:
http://www.67-72chevytrucks.com/vboa...d.php?t=686246
Got help with the intake manifold leaks around the bolts here : http://www.67-72chevytrucks.com/vboa...d.php?t=510440
Started up today to check my work.
The above leaks are fixed.
I really wanted to make sure, so I ran it quite some time.
Let it warm up real good and revved it up really high for a good duration.
And then I found another leak.
It's blowing out around the dipstick when I get the rpm's way up.
So searching these forums I found this :
http://www.67-72chevytrucks.com/vboa...d.php?t=444335

66-PMD-GMC · 11-30-2015, 10:01 PM

Revving an unloaded engine is not at all advised.
Just saying..
"Blow by" at high RPMs is indicative of rings seating improperly. .
IMHO. . There is more going on than high crank case pressure going on.

LostMy65 · 12-01-2015, 10:18 AM

Thanks, I wasn't aware of that.

LostMy65 · 12-11-2015, 08:49 PM

After doing much research in these forums, I ordered a Lokar Dipstick. Fit very nicely. Started the engine again to make double sure I got all my leaks sealed up.
All good.
Now I can finally install the Th350.

LostMy65 · 12-11-2015, 10:14 PM

Hooked up my Lokar AutoTranny Dipstick.
Installed a Moroso Th350 pan gasket.
Slid the Torque Converter on (dbl clunk), and then bolted the tranny up.
Tomorrow I hope to route the cooler lines, and mock up the shifter linkage.

LostMy65 · 12-14-2015, 07:54 PM

I modified 67-72 linkage to work with my 62 frame.

..
.
Here's what I ended up doing.
.

.
Didn't use this.
.

LT7A · 01-09-2016, 10:57 PM

Hope that the T350 and 12bolt swap all comes together well for you. I really enjoyed reading this thread as you pursued your old truck. I almost wished that you hadn't posted the updated pics at the beginning so that I could have stayed in suspense, ha. Your truck has the perfect stance. I'm partial to the squarebodies, having grown up riding in family Suburbans from that era. But your truck sits just right and makes the proportions of the sixties body come together.

LostMy65 · 01-09-2016, 11:32 PM

I really appreciate the compliments.

**Palf70Step** · 01-10-2016, 10:04 AM

Enjoying this also. Keeping track of all you are doing for when I decide to go from my 3-speed to a T350.

LT7A · 01-10-2016, 09:40 PM

Quote:

Originally Posted by LostMy65

I really appreciate the compliments.

You bet. Holler at me if you see a CL item or something you need from up Seattle way and I'll see what I can do. I'm in Portland every coupla months or so.

LostMy65 · 01-16-2016, 08:09 PM

Lately it's been just too cold to tinker.
But today it was a whopping 50 degrees.
Which is not bad working weather.
Got some stuff done.
Got the Transmission cooler hooked up.
Found some good info here.
http://Www.67-72chevytrucks.com/vboa....php?p=7101214
.
Also got the 12-Bolt all bolted up along the brake lines and driveline.
Pretty happy with today's progress.
Hopefully this week I can start it up and see if the tranny shifts through the gears.
.

.

66-PMD-GMC · 01-16-2016, 08:12 PM

Quote:

Originally Posted by LostMy65

Lately it's been just too cold to tinker.
But today it was a whopping 50 degrees.
Which is not bad working weather.
Got some stuff done.
Got the Transmission cooler hooked up.
Found some good info here.
http://Www.67-72chevytrucks.com/vboa....php?p=7101214
.
Also got the 12-Bolt all bolted up along the brake lines and driveline.
Pretty happy with today's progress.
Hopefully this week I can start it up and see if the tranny shifts through the gears.
.

.

Nice progress. . Very nice indeed

LostMy65 · 01-20-2016, 04:38 PM

My 65 cab is on a 62 frame.
The front cab mounts are located differently.
I didn't want to move my existing ones in the event I ever go back to a newer frame.
I tried finding replacement mounting washers, but they were rather costly.
I found these for $10 shipped.
Strut caps.

66-PMD-GMC · 01-20-2016, 09:54 PM

Quote:

Originally Posted by LostMy65

My 65 cab is on a 62 frame.
The front cab mounts are located differently.
I didn't want to move my existing ones in the event I ever go back to a newer frame.
I tried finding replacement mounting washers, but they were rather costly.
I found these for $10 shipped.
Strut caps.

Can you pm me the info on those.. I need them often

LostMy65 · 01-20-2016, 09:57 PM

http://pages.ebay.com/motors/link/?n...094604&alt=web
.
Front Strut Cap Limit Stop Suspension for VW Golf Jetta Passat 1H0412319B

LostMy65 · 01-23-2016, 09:09 PM

I'm excited to say I got it all going and shifting through the gears. Got it nice and warm and revved it up some to verify no leaks. So cool - all is good.
So,
Next week I'll mount the cab back down and start hooking everything back up.

likaroc13 · 01-23-2016, 10:29 PM

66Z71 · 01-24-2016, 12:32 AM

Nice. Can't wait to see it running around soon.

LostMy65 · 01-24-2016, 05:45 PM

Had some time today after all.
Got the cab mounted down.

66-PMD-GMC · 01-24-2016, 10:48 PM

Nice progress

**Palf70Step** · 01-24-2016, 10:59 PM

Gettin back to that cruisin' state!

11-13-2015, 08:54 PM	#526
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 Driveshaft came today. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-27-2015, 07:30 PM	#527
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 I haven't been very motivated lately because of the cold. Hacked in an old cast-iron wood stove I got for free. Sit down and take a break next to a nice warm stove. :-) __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-27-2015, 07:39 PM	#528
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Lost My 65 Wood burning stove... Sweet warmth of a lovely fire... Nothing better during a work break.. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

11-28-2015, 12:08 AM	#529
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: Lost My 65 Boy that looks like an oldie. If you have uninsulated pipe outside, keep an eye on it for creasote buildup. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-30-2015, 09:30 PM	#530
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 Having a warm stove motivated me to button up a couple oil leaks I found. Got help for fixing the cam plug leak here: http://www.67-72chevytrucks.com/vboa...d.php?t=686246 Got help with the intake manifold leaks around the bolts here : http://www.67-72chevytrucks.com/vboa...d.php?t=510440 Started up today to check my work. The above leaks are fixed. I really wanted to make sure, so I ran it quite some time. Let it warm up real good and revved it up really high for a good duration. And then I found another leak. It's blowing out around the dipstick when I get the rpm's way up. So searching these forums I found this : http://www.67-72chevytrucks.com/vboa...d.php?t=444335 __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-30-2015, 10:01 PM	#531
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Lost My 65 Revving an unloaded engine is not at all advised. Just saying.. "Blow by" at high RPMs is indicative of rings seating improperly. . IMHO. . There is more going on than high crank case pressure going on. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

12-01-2015, 10:18 AM	#532
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 Thanks, I wasn't aware of that. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

12-11-2015, 08:49 PM	#533
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 After doing much research in these forums, I ordered a Lokar Dipstick. Fit very nicely. Started the engine again to make double sure I got all my leaks sealed up. All good. Now I can finally install the Th350. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

12-11-2015, 10:14 PM	#534
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 Hooked up my Lokar AutoTranny Dipstick. Installed a Moroso Th350 pan gasket. Slid the Torque Converter on (dbl clunk), and then bolted the tranny up. Tomorrow I hope to route the cooler lines, and mock up the shifter linkage. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

12-14-2015, 07:54 PM	#535
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 I modified 67-72 linkage to work with my 62 frame. .. . Here's what I ended up doing. . . Didn't use this. . __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-09-2016, 10:57 PM	#536
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,615	Re: Lost My 65 Hope that the T350 and 12bolt swap all comes together well for you. I really enjoyed reading this thread as you pursued your old truck. I almost wished that you hadn't posted the updated pics at the beginning so that I could have stayed in suspense, ha. Your truck has the perfect stance. I'm partial to the squarebodies, having grown up riding in family Suburbans from that era. But your truck sits just right and makes the proportions of the sixties body come together.

01-09-2016, 11:32 PM	#537
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 I really appreciate the compliments. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-10-2016, 10:04 AM	#538
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: Lost My 65 Enjoying this also. Keeping track of all you are doing for when I decide to go from my 3-speed to a T350. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-16-2016, 08:09 PM	#540
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 Lately it's been just too cold to tinker. But today it was a whopping 50 degrees. Which is not bad working weather. Got some stuff done. Got the Transmission cooler hooked up. Found some good info here. http://Www.67-72chevytrucks.com/vboa....php?p=7101214 . Also got the 12-Bolt all bolted up along the brake lines and driveline. Pretty happy with today's progress. Hopefully this week I can start it up and see if the tranny shifts through the gears. . . __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-20-2016, 04:38 PM	#542
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 My 65 cab is on a 62 frame. The front cab mounts are located differently. I didn't want to move my existing ones in the event I ever go back to a newer frame. I tried finding replacement mounting washers, but they were rather costly. I found these for $10 shipped. Strut caps. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035



Register or Log In To remove these advertisements.

01-20-2016, 09:57 PM	#544
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 http://pages.ebay.com/motors/link/?n...094604&alt=web . Front Strut Cap Limit Stop Suspension for VW Golf Jetta Passat 1H0412319B __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-23-2016, 09:09 PM	#545
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 I'm excited to say I got it all going and shifting through the gears. Got it nice and warm and revved it up some to verify no leaks. So cool - all is good. So, Next week I'll mount the cab back down and start hooking everything back up. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-23-2016, 10:29 PM	#546
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: Lost My 65 __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-24-2016, 12:32 AM	#547
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: Lost My 65 Nice. Can't wait to see it running around soon. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

01-24-2016, 05:45 PM	#548
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: Lost My 65 Had some time today after all. Got the cab mounted down. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-24-2016, 10:48 PM	#549
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Lost My 65 Nice progress __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

01-24-2016, 10:59 PM	#550
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: Lost My 65 Gettin back to that cruisin' state! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Register or Log In To remove these advertisements.