Vintage Air Sale - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Beat68CST · 03-02-2013, 10:47 AM

I have a 68, Factory AC truck.

Need a kit minus compressor, did a Cummins swap and gonna run it's stock compressor.

Scottshotrods · 03-02-2013, 12:21 PM

Quote:

Originally Posted by Beat68CST

I have a 68, Factory AC truck.

Need a kit minus compressor, did a Cummins swap and gonna run it's stock compressor.

p/m sent

Justin

Wasted Income · 03-04-2013, 03:22 PM

Just ordered up a kit from Justin. Great price and service. Thanks.

Scottshotrods · 03-04-2013, 04:14 PM

Quote:

Originally Posted by Wasted Income

Just ordered up a kit from Justin. Great price and service. Thanks.

Thanks for the order

Justin

4oldcars · 03-10-2013, 10:36 AM

Can I get a quote for a 71 Jimmy. 350 engine. Compressor will go on the right. This is a non air vehicle however previous owner installed the factory vents on either side of the dash and I have an extension on the bottom of the dash so I will put the center vent there. I also have a factory heat/air control that I would like to use. Shipping will be to 20736. Thanx.

Scottshotrods · 03-11-2013, 01:47 PM

Quote:

Originally Posted by 4oldcars

Can I get a quote for a 71 Jimmy. 350 engine. Compressor will go on the right. This is a non air vehicle however previous owner installed the factory vents on either side of the dash and I have an extension on the bottom of the dash so I will put the center vent there. I also have a factory heat/air control that I would like to use. Shipping will be to 20736. Thanx.

p/m sent

Justin

MDc10 · 03-11-2013, 04:01 PM

Could I get a quote for 86 Silverado, factory air plus a compressor.
Posted via Mobile Device

Scottshotrods · 03-11-2013, 04:06 PM

Quote:

Originally Posted by MDc10

Could I get a quote for 86 Silverado, factory air plus a compressor.
Posted via Mobile Device

p/m sent

Justin

pbjsammich · 03-13-2013, 01:27 PM

Just sent an email Justin....1967 C10, looking for a true-fit kit with a few other odds and ends.

Scottshotrods · 03-13-2013, 01:37 PM

Quote:

Originally Posted by pbjsammich

Just sent an email Justin....1967 C10, looking for a true-fit kit with a few other odds and ends.

Never got the p/m can you resend please

Justin

sqrlnts · 03-13-2013, 05:34 PM

Could I get a price for a complete system for my 57 Chevy 3100.
350 SBC with the compressor on the right.
I currently have a deluxe controller
Thanks!

Scottshotrods · 03-14-2013, 08:08 PM

I am at the Lonestar nationals in texas will be back on Monday at the shop and will have you some prices

Justin
Posted via Mobile Device

tech@scottshotrods · 03-15-2013, 06:13 PM

Quote:

Originally Posted by sqrlnts

Could I get a price for a complete system for my 57 Chevy 3100.
350 SBC with the compressor on the right.
I currently have a deluxe controller
Thanks!

PM sent!

Nikotrans · 03-17-2013, 12:21 AM

Looking for a quote for a 74057-LCU-A system with 49755-LCI replacement control panel.

!957 Chevy 3100 pickup - 383 SBC - compressor on right side.

Thanks

tech@scottshotrods · 03-18-2013, 10:15 AM

Quote:

Originally Posted by Nikotrans

Looking for a quote for a 74057-LCU-A system with 49755-LCI replacement control panel.

!957 Chevy 3100 pickup - 383 SBC - compressor on right side.

Thanks

PM sent!

69sinker · 03-22-2013, 10:40 PM

Can I get a quote 69 cst a/c cab with 02 5.7 LS swap
Posted via Mobile Device

Scottshotrods · 03-23-2013, 01:26 PM

Quote:

Originally Posted by 69sinker

Can I get a quote 69 cst a/c cab with 02 5.7 LS swap
Posted via Mobile Device

p/m sent

Justin

truckzilla · 03-30-2013, 06:51 PM

Hey Justin,
Can I get a quote for a Gen IV that I'm putting in a '77 C10 with a smooth firewall and refitted with a dash from a '66 C10? I'll need the condensor, dryer and stuff for the '77 since that part is staying the same. Sort of like a modified Sure-fit kit for the '73-'87 models. I thought I'd use a 491226-RVA control panel and 4 vents number 490621 (although I'm not sure what size hose those take) along with what ever else you can think of that I might need). I don't think I'll need a compressor right now since I'm planning on getting one of their Front Runner serpertine systems that would come with a compressor.

Thanks,
Larry

Scottshotrods · 04-01-2013, 12:54 PM

Quote:

Originally Posted by truckzilla

Hey Justin,
Can I get a quote for a Gen IV that I'm putting in a '77 C10 with a smooth firewall and refitted with a dash from a '66 C10? I'll need the condensor, dryer and stuff for the '77 since that part is staying the same. Sort of like a modified Sure-fit kit for the '73-'87 models. I thought I'd use a 491226-RVA control panel and 4 vents number 490621 (although I'm not sure what size hose those take) along with what ever else you can think of that I might need). I don't think I'll need a compressor right now since I'm planning on getting one of their Front Runner serpertine systems that would come with a compressor.

Thanks,
Larry

p/m sent

Justin

Gokart Mozart · 04-02-2013, 12:42 AM

Looking for a surefit kit for a 70 with a 250 inline 6 without a/c.

Scottshotrods · 04-02-2013, 11:54 AM

Quote:

Originally Posted by Gokart Mozart

Looking for a surefit kit for a 70 with a 250 inline 6 without a/c.

P/m sent

Justin

Scottshotrods · 04-10-2013, 10:59 AM

Back to the top

Justin

camaro_red · 04-10-2013, 11:48 AM

Looking for a air set up for my 72 Cheyenne..Removed all the original stuff under the hood for a smooth look to the firewall. I have not filled any factory firewall openings so does this kit come with a coverplate ?..Don't need a compressor as I'm running a serpentine set up that included the pump..Does this system use the stock AC vents ?..PayPal ??

Thanks Joe

Scottshotrods · 04-10-2013, 12:37 PM

Quote:

Originally Posted by camaro_red

Looking for a air set up for my 72 Cheyenne..Removed all the original stuff under the hood for a smooth look to the firewall. I have not filled any factory firewall openings so does this kit come with a coverplate ?..Don't need a compressor as I'm running a serpentine set up that included the pump..Does this system use the stock AC vents ?..PayPal ??

Thanks Joe

p/m sent

Justin

OrrieG · 04-11-2013, 12:51 AM

Do you sell partial kits? I have a 59 surefit underdash unit and hoses. I need the radiator condenser, hardlines and filter, for passenger side compressor. Thanks Patrick

03-02-2013, 10:47 AM	#526
Beat68CST Registered User Join Date: Oct 2010 Location: Buckeye Arizona Posts: 470	Re: Vintage Air Sale I have a 68, Factory AC truck. Need a kit minus compressor, did a Cummins swap and gonna run it's stock compressor.

03-04-2013, 03:22 PM	#528
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: Vintage Air Sale Just ordered up a kit from Justin. Great price and service. Thanks. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

03-10-2013, 10:36 AM	#530
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: Vintage Air Sale Can I get a quote for a 71 Jimmy. 350 engine. Compressor will go on the right. This is a non air vehicle however previous owner installed the factory vents on either side of the dash and I have an extension on the bottom of the dash so I will put the center vent there. I also have a factory heat/air control that I would like to use. Shipping will be to 20736. Thanx. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

03-13-2013, 01:27 PM	#534
pbjsammich Registered User Join Date: Aug 2011 Location: Lake Conroe TX Posts: 53	Re: Vintage Air Sale Just sent an email Justin....1967 C10, looking for a true-fit kit with a few other odds and ends. __________________ 1967 C10 Stepside - "Minty" 1972 GMC 3500 - "Rojo Grande"

03-13-2013, 05:34 PM	#536
sqrlnts Registered User Join Date: Apr 2009 Location: Chandler AZ Posts: 750	Re: Vintage Air Sale Could I get a price for a complete system for my 57 Chevy 3100. 350 SBC with the compressor on the right. I currently have a deluxe controller Thanks!

03-11-2013, 04:01 PM	#532
MDc10 Registered User Join Date: Sep 2012 Location: Broken Arrow, ok Posts: 181	Could I get a quote for 86 Silverado, factory air plus a compressor. Posted via Mobile Device

03-14-2013, 08:08 PM	#537
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Vintage Air Sale I am at the Lonestar nationals in texas will be back on Monday at the shop and will have you some prices Justin Posted via Mobile Device

03-17-2013, 12:21 AM	#539
Nikotrans Registered User Join Date: Aug 2012 Location: San Diego, CA Posts: 23	Re: Vintage Air Sale Looking for a quote for a 74057-LCU-A system with 49755-LCI replacement control panel. !957 Chevy 3100 pickup - 383 SBC - compressor on right side. Thanks

03-22-2013, 10:40 PM	#541
69sinker Registered User Join Date: Nov 2012 Location: eldred,il Posts: 503	Re: Vintage Air Sale Can I get a quote 69 cst a/c cab with 02 5.7 LS swap Posted via Mobile Device

03-30-2013, 06:51 PM	#543
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: Vintage Air Sale Hey Justin, Can I get a quote for a Gen IV that I'm putting in a '77 C10 with a smooth firewall and refitted with a dash from a '66 C10? I'll need the condensor, dryer and stuff for the '77 since that part is staying the same. Sort of like a modified Sure-fit kit for the '73-'87 models. I thought I'd use a 491226-RVA control panel and 4 vents number 490621 (although I'm not sure what size hose those take) along with what ever else you can think of that I might need). I don't think I'll need a compressor right now since I'm planning on getting one of their Front Runner serpertine systems that would come with a compressor. Thanks, Larry

04-02-2013, 12:42 AM	#545
Gokart Mozart Registered User Join Date: Apr 2011 Location: Detroit Posts: 432	Re: Vintage Air Sale Looking for a surefit kit for a 70 with a 250 inline 6 without a/c.

04-10-2013, 10:59 AM	#547
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Vintage Air Sale Back to the top Justin

04-10-2013, 11:48 AM	#548
camaro_red Registered User Join Date: Oct 2007 Location: Prince George Canada Posts: 267	Re: Vintage Air Sale Looking for a air set up for my 72 Cheyenne..Removed all the original stuff under the hood for a smooth look to the firewall. I have not filled any factory firewall openings so does this kit come with a coverplate ?..Don't need a compressor as I'm running a serpentine set up that included the pump..Does this system use the stock AC vents ?..PayPal ?? Thanks Joe __________________ ____ ______//__{\_____ ,/_(O)__/____/_(O)_/

04-11-2013, 12:51 AM	#550
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Vintage Air Sale Do you sell partial kits? I have a 59 surefit underdash unit and hoses. I need the radiator condenser, hardlines and filter, for passenger side compressor. Thanks Patrick __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.