![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: "Geronimo" 54' 3100 LS built in PA
7-4-18 Lots of thins getting wrapped up on Geronimo. I would like to announce I finally drove it out of the garage and up the street on June 30th!! Trans shifted right away so its working, but will prolly have to set it to shift at a higher RPM. I took .75" out of the rear blocks and it made a big difference, these photos have with and without the cut blocks. hood fits like crap but man I'm glad I even got it to latch so far. It was seriously out of wack. Had to make those hood braces for the front out of scratch, things like that you just don't always foresee in a build.
Redid the stock gauges, will do speedo conversion later. need to hook up heater/AC and wire up the interior lights and all the wiring is done. Hooked horn up also. Put new lock cylinders in doors. Stupid me didn't make sure I could get the handles off, bf I already set the doors. So i had to take doors off, weld nuts onto the clutch heads so I could remove the door handles. Nice to finally drive it over to my lift bay, put it on there and aligned it the best I could, tightened everything up and put the sway bar on. Biggest issue I have right now is the Efan, i realized I have it pushing instead of pulling, but.... the fan is still not kicking off even at like 180, so I dunno if I have the relay wired wrong or what the deal is. Never had that happen. but when you shut truck off, the fan will run and run and run. This is one example of why I LOVE a kill switch in the cab, I just shut the main pwr off. Its great safety, convenience, theft protective. I will hopefully get some driving footage soon. He has to register the truck and we will then get it inspected. Tires on it now are mine and won't pass, so he is just gonna try some port o walls. I gotta see if the wipers work too. and do ebrake, and do the door panels and headliner!
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: "Geronimo" 54' 3100 LS built in PA
Funny side note, when I drive it I still want to use my left foot for the brake as I'm so used to these trucks being a stick. I have to get use to that. My daily is an auto and I don't do that, so it must be a hotrod thing. I need 3 pedals!
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: "Geronimo" 54' 3100 LS built in PA
Nice job that will look killer driving down the road.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,557
|
Re: "Geronimo" 54' 3100 LS built in PA
Looks great, nice work...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2014
Location: Sunnyvale, CA
Posts: 605
|
Re: "Geronimo" 54' 3100 LS built in PA
Very nice!
__________________
1950 3100 5 window |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: "Geronimo" 54' 3100 LS built in PA
Took Geronimo out for about a 12 mile drive the other day. Went really good, drove real nice. We got some new tires put on, radials with ports on them. I'm a bias fan, but these look really good. Got a vacuum wiper to work, so we are just gonna run them. Buttoning up a few interior things. Made some door panels, I'll post some better interior pics soon. Filmed a little vid, but have to get it off someones phone so I can upload.
1.Few issues right now, waiting on classic plate to come. Hoping it doesn't take the 6 weeks they say it could take. 2.Have a buzzing noise from transmission, seems to have gotten worse. was only doing in it in drive, now in all gears. Its nothing you can notice driving, but at idle you can hear it if you try. So any ideas? The controller is directly grounded to battery and powered by ignition. 3. rear brakes seemed a tad hot, calipers didn't seam to be sticking, so maybe its just the new pads. but fronts didn't seam hot. Be taking it on some longer runs soon. I'm taking some time off building so I can work on garages, and I'm building a coffee roaster. So my next projects are going to have to wait till Fall. Been doing little here and there on my 51'. I also have a cnc plasma coming this month so I'll be setting that up.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,557
|
Re: "Geronimo" 54' 3100 LS built in PA
Henry, sounds like your going to be real busy, driving them is always fun...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: "Geronimo" 54' 3100 LS built in PA
Great job on driving it. I'm looking forward to hanging out with you again this fall. Oh and more coffee.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: "Geronimo" 54' 3100 LS built in PA
8-17 Took Geronimo out to our hometown show last weekend. Took 1st place in trucks. Only have put 30-40 miles on it so far. Has a AN fitting go bad and leaked trans fluid. not sure what really all happened, if it was too low on fluid or what, but trans was getting hot and making noise. I fixed the fitting and put fluid in it. really haven't drove it hard since. noise seemed to have gone away. So hopefully I don't have to yank this trans. I gotta hook up heat and AC and do the speedo conversion at some point.
Finally finished interior, did floor, headliner, visors etc. owner is very happy with it and since my 51' is still tore down, I'm fortunate to be able to drive this truck pretty much whenever!
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2012
Location: Northeast KS
Posts: 1,778
|
Re: "Geronimo" 54' 3100 LS built in PA
Interior and steering wheel look great!
__________________
1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: "Geronimo" 54' 3100 LS built in PA
Well deserved!!!
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#12 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,557
|
Re: "Geronimo" 54' 3100 LS built in PA
Congrats...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: "Geronimo" 54' 3100 LS built in PA
thanks guys,
here are some more pics from the other day. Trans is getting a bit hot so I'm adding a cooler asap and gonna start taking her on some longer trips. I'm really glad I went with the TCI ez tcu bc the handheld lets you see live data, tells you how fast your going, rpm and trans temp etc. Nice feature for sure. I'll prolly post up some professional photos when I get my buddy to take them. but really the truck is considered done in my book. Just need to finish heat/ac really and put as many miles as we can on her bf winter. Owner is in the last pic, his name is Jim and is one of my good friends dad. He nearly died in work fire about 4 years ago, still recovering. This truck and our garage have really helped his moral and I think healing.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,557
|
Re: "Geronimo" 54' 3100 LS built in PA
Good for you, helping people that deserve it, truck looks great...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
|
Re: "Geronimo" 54' 3100 LS built in PA
Truck looks great! No doubt being involved is helping your friends Dad. Good stuff...
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: "Geronimo" 54' 3100 LS built in PA
Yah I truly care about these trucks and him just wanting it done. I'v put over 150 hrs in it for free and trust me, I got no time to spare so its been tuff to balance all that and waiting and wondering if the thing will ever see the road! but as they always do, they get done and you move on. The other cool thing is I get to be around the truck as much as if it were mine, so thats a big bonus (but....I'll have to fix everything on it whenever that time comes!).
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Sep 2018
Location: Ford City, PA
Posts: 1
|
Re: "Geronimo" 54' 3100 LS built in PA
Awesome build! I just joined this site to get as much information as possible before starting the 54 3100 I just picked up a few weeks ago. I believe we were texting each other sometime last year about these trucks. I had a 51 GMC that I started, but bailed on and also bought a 49 3100 that I decided to just resell.. Now its time to build! haha.
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: "Geronimo" 54' 3100 LS built in PA
vaguely remember. hit me up if you need though. welcome to the site. You can learn more about these trucks on here than just about anywhere on the web. Its a blessing having a community like this on here.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: "Geronimo" 54' 3100 LS built in PA
Good job Henry
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: "Geronimo" 54' 3100 LS built in PA
I'll have to get a reading on the pressure. But yeah I got a little more work with the lines and coolers and hopefully I can get it figured out.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1954, ls engine, patina |
|
|