Project 67 DRGNWGN - 67 Burban!! - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slick67 · 11-09-2011, 12:07 AM

Have the rims drilled, that way you won't have to worry about adapters. There are a few places, like rim straightening shops, that can do that for ya. might be a little more $, but worth it.

**kev2809** · 11-09-2011, 07:52 AM

i was thinking of that..but the rims are 8" wide and i think the backspace is 5 or 6"...i cant remember. but im not sure they will work if i redrill them....im not a rim guy so i have no clue what fits or doesnt lol. first set of rims ive ever owned
Posted via Mobile Device

Slick67 · 11-09-2011, 09:31 AM

My rear 22's are 5.5 BS, I think, so it should be good. I am running a 71 rearend which makes a difference. My 20 inch fronts are 5.5 BS and are 8.5 inches wide so your 22's should be good on the front too. Do you know anyone with a 67-72 truck that is lowered who lives nearby? Only one of the holes will be drilled that actually hits another hole so it looks like an 8. All the other holes would be close but wouldn't run together..........IIRC.

Slick67 · 11-09-2011, 10:49 AM

I have to say Kev, it isn't the best way to go (drilling). Adapter plates would make them stick out too far. Ummmmm, what kinda truck did these come off of??

**kev2809** · 11-09-2011, 12:43 PM

they actually came off of an 07 altima...they are only 8" wide rims
Posted via Mobile Device

Slick67 · 11-09-2011, 12:52 PM

Quote:

Originally Posted by kev2809

they actually came off of an 07 altima...they are only 8" wide rims
Posted via Mobile Device

Easy enough. Find the BS on them now and then add the amount you need to make it approx. 5.5 inches overall total and that would be your spacer/adapter thickness. Discount Tire should be able to tell you the BS on them with a quick lookup.

**kev2809** · 11-09-2011, 08:30 PM

ok..remeasured just now and from the stick laying across the back of the rim..to the mounting area is 6". and the rims are 22x8.5"

Mulk · 11-09-2011, 10:18 PM

I'm not sure about the backspacing on mine, but it's right around 6in. When I converted to disc brakes, the mounting surface moved-out 3/4 closer towards the fender, than it was with the drums.

So that being said.... It would be like having a 3/4 inch adapter on there, and I'm clearing with 20x8.5 on front. So you may be in luck

Slick67 · 11-09-2011, 11:09 PM

That's alot of space to fill even with a spacer, but it sounds about right. If you take a peice of wood 1 inch thick and put it on your rotor, then push the rim up to it as close as you can it should give you a good idea of how far out it will be with adapters. Here is a website that might help with the backspacing.
https://www.rsracing.com/tech-wheel.html

**kev2809** · 11-11-2011, 11:02 PM

i finallly found some info on the rims...in the craziest way lol

im leaving work today..getting in my truck and notice the charger parked next to me. well i see this car just about every day, and i finally look down at his 22's. and it hit me, hes got the same damn rims as me lol. so i tell him to roll his window down and ask him about the rims... they are Lucky 6's...made by BZO. every pic i have found shows a Morpheus on the cap...so not sure why they say that. anywho, heres a link to the specs..

http://www.bzowheels.com/wheeldetail...&finish=Chrome

im not sure what the numbers on the side mean....?

Mulk · 11-11-2011, 11:31 PM

That +15 and +38 refers to the offset, in mm. So they have positive offset of 15 or 38mm. Now as far as that translates, I can't remember.

From what I remember, it's measured from the center of the width of the rim. So in your case, 4 1/4. Sooo, +15 would move the face of the rim 15mm closer to the lip. If that is the case, then +38 would provide the most backspace, and less lip.... I THINK. Somebody else help me out here
Posted via Mobile Device

Slick67 · 11-17-2011, 11:54 PM

Updates Kev?

**kev2809** · 11-18-2011, 07:51 AM

nothin yet...cant finish the fenders til i get the rims on so i might go ahead and order them next week. i have been wanting to start the body work but im a little nervous!
Posted via Mobile Device

Slick67 · 11-18-2011, 09:03 AM

Quote:

Originally Posted by kev2809

nothin yet...cant finish the fenders til i get the rims on so i might go ahead and order them next week. i have been wanting to start the body work but im a little nervous!
Posted via Mobile Device

As we have all seen on your build, there is nothing that you can't do! Why be nervous? Make sure you longboard the sides and large surfaces and it'll look fine. We did mine several times and the results are obvious. Everything else you have done came out great!

**kev2809** · 11-19-2011, 01:18 PM

lol thanks

i was dickin around with the rims this morning to see if they fit. and from what i measured i think the 1.25 or 1.5" adapters should both work. i just laid the wheels up against the lug nut studs (they are 1" long)...and centered them into the middle. the front had probably at least another inch before they would hit. the back had tons of room. the front still needed to be aired out about 2-3 more inches, and the back is actually almost all the way up.

heres a few pics..

hotrodchevy1999 · 11-19-2011, 01:45 PM

like the wheels hope they work out for you

Mulk · 11-20-2011, 01:03 AM

Looks good. Every time I get wheels during a build, I tuck 'em and lay-out the project. Then I take a photo, and use it as a motivator.
Posted via Mobile Device
Posted via Mobile Device

jmedero · 11-20-2011, 01:11 AM

Looks good man keep at it.
Posted via Mobile Device

**kev2809** · 11-24-2011, 11:39 PM

Appreciate it fellas...got the wheel adapters ordered yesterday. Pics coming soon with the wheels mounted!
Posted via Mobile Device

**kev2809** · 12-03-2011, 02:02 PM

the money shot...

will be a few days before i roll it out, i need to move it to the other side because "somebody" wants to start parking in the garage..

the adapters made them fit perfect..i had to trim out the rear tub area more..and also im going to have to gut the fender and go with aftermarket hinges. they rest on the tire just a bit, but i still dont have the motor in so it will drop another inch and a half or so...

so what you guys think?

VA72C10 · 12-03-2011, 02:58 PM

Very nice!!!

jmedero · 12-03-2011, 04:26 PM

Looks good man. Start putting her back together so you can drive her!!!
Posted via Mobile Device

**kev2809** · 12-03-2011, 06:19 PM

lol i know...i cant wait to get this thing straight so i can get some paint on it!

still a lot of work ahead of me!

Slick67 · 12-04-2011, 03:05 PM

Kev! That looks killer. Shotgun, when you get her rollin!

Mulk · 12-04-2011, 05:36 PM

Those tuck in there nice. Looks good man
Posted via Mobile Device

11-09-2011, 12:07 AM	#526
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Have the rims drilled, that way you won't have to worry about adapters. There are a few places, like rim straightening shops, that can do that for ya. might be a little more $, but worth it. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

11-09-2011, 07:52 AM	#527
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! i was thinking of that..but the rims are 8" wide and i think the backspace is 5 or 6"...i cant remember. but im not sure they will work if i redrill them....im not a rim guy so i have no clue what fits or doesnt lol. first set of rims ive ever owned Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-09-2011, 09:31 AM	#528
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! My rear 22's are 5.5 BS, I think, so it should be good. I am running a 71 rearend which makes a difference. My 20 inch fronts are 5.5 BS and are 8.5 inches wide so your 22's should be good on the front too. Do you know anyone with a 67-72 truck that is lowered who lives nearby? Only one of the holes will be drilled that actually hits another hole so it looks like an 8. All the other holes would be close but wouldn't run together..........IIRC. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

11-09-2011, 10:49 AM	#529
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! I have to say Kev, it isn't the best way to go (drilling). Adapter plates would make them stick out too far. Ummmmm, what kinda truck did these come off of?? __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

11-09-2011, 12:43 PM	#530
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! they actually came off of an 07 altima...they are only 8" wide rims Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-09-2011, 08:30 PM	#532
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! ok..remeasured just now and from the stick laying across the back of the rim..to the mounting area is 6". and the rims are 22x8.5" __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-09-2011, 10:18 PM	#533
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Project 67 DRGNWGN - 67 Burban!! I'm not sure about the backspacing on mine, but it's right around 6in. When I converted to disc brakes, the mounting surface moved-out 3/4 closer towards the fender, than it was with the drums. So that being said.... It would be like having a 3/4 inch adapter on there, and I'm clearing with 20x8.5 on front. So you may be in luck __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

11-09-2011, 11:09 PM	#534
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! That's alot of space to fill even with a spacer, but it sounds about right. If you take a peice of wood 1 inch thick and put it on your rotor, then push the rim up to it as close as you can it should give you a good idea of how far out it will be with adapters. Here is a website that might help with the backspacing. https://www.rsracing.com/tech-wheel.html __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

11-11-2011, 11:02 PM	#535
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! i finallly found some info on the rims...in the craziest way lol im leaving work today..getting in my truck and notice the charger parked next to me. well i see this car just about every day, and i finally look down at his 22's. and it hit me, hes got the same damn rims as me lol. so i tell him to roll his window down and ask him about the rims... they are Lucky 6's...made by BZO. every pic i have found shows a Morpheus on the cap...so not sure why they say that. anywho, heres a link to the specs.. http://www.bzowheels.com/wheeldetail...&finish=Chrome im not sure what the numbers on the side mean....? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-11-2011, 11:31 PM	#536
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Project 67 DRGNWGN - 67 Burban!! That +15 and +38 refers to the offset, in mm. So they have positive offset of 15 or 38mm. Now as far as that translates, I can't remember. From what I remember, it's measured from the center of the width of the rim. So in your case, 4 1/4. Sooo, +15 would move the face of the rim 15mm closer to the lip. If that is the case, then +38 would provide the most backspace, and less lip.... I THINK. Somebody else help me out here Posted via Mobile Device __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

11-17-2011, 11:54 PM	#537
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Updates Kev? __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

11-18-2011, 07:51 AM	#538
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! nothin yet...cant finish the fenders til i get the rims on so i might go ahead and order them next week. i have been wanting to start the body work but im a little nervous! Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-19-2011, 01:18 PM	#540
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! lol thanks i was dickin around with the rims this morning to see if they fit. and from what i measured i think the 1.25 or 1.5" adapters should both work. i just laid the wheels up against the lug nut studs (they are 1" long)...and centered them into the middle. the front had probably at least another inch before they would hit. the back had tons of room. the front still needed to be aired out about 2-3 more inches, and the back is actually almost all the way up. heres a few pics.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-19-2011, 01:45 PM	#541
hotrodchevy1999 Hotrodchevy Join Date: Sep 2010 Location: Hot Springs NC Posts: 275	Re: Project 67 DRGNWGN - 67 Burban!! like the wheels hope they work out for you __________________ 2017 1500 CREW CAB GMC 1997 C1500 Chevy 1971 CHEVY CHEVELLE SS 402BB : 1971 CHEVY C10 Stepside Project 71 cluncker http://67-72chevytrucks.com/vboard/s...ferrerid=89816 My Build Second Chance Suburban (SCS)http://67-72chevytrucks.com/vboard/s...d.php?t=424650

11-20-2011, 01:03 AM	#542
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Project 67 DRGNWGN - 67 Burban!! Looks good. Every time I get wheels during a build, I tuck 'em and lay-out the project. Then I take a photo, and use it as a motivator. Posted via Mobile Device Posted via Mobile Device __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690



Register or Log In To remove these advertisements.

11-20-2011, 01:11 AM	#543
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Project 67 DRGNWGN - 67 Burban!! Looks good man keep at it. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

11-24-2011, 11:39 PM	#544
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! Appreciate it fellas...got the wheel adapters ordered yesterday. Pics coming soon with the wheels mounted! Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-03-2011, 02:02 PM	#545
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! the money shot... will be a few days before i roll it out, i need to move it to the other side because "somebody" wants to start parking in the garage.. the adapters made them fit perfect..i had to trim out the rear tub area more..and also im going to have to gut the fender and go with aftermarket hinges. they rest on the tire just a bit, but i still dont have the motor in so it will drop another inch and a half or so... so what you guys think? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-03-2011, 02:58 PM	#546
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project 67 DRGNWGN - 67 Burban!! Very nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-03-2011, 04:26 PM	#547
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Project 67 DRGNWGN - 67 Burban!! Looks good man. Start putting her back together so you can drive her!!! Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-03-2011, 06:19 PM	#548
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! lol i know...i cant wait to get this thing straight so i can get some paint on it! still a lot of work ahead of me! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-04-2011, 03:05 PM	#549
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Kev! That looks killer. Shotgun, when you get her rollin! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

12-04-2011, 05:36 PM	#550
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Project 67 DRGNWGN - 67 Burban!! Those tuck in there nice. Looks good man Posted via Mobile Device __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

Register or Log In To remove these advertisements.