Project "Rock-a-Billy".....Saga Continues..... - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 01-05-2009, 11:00 PM

Quote:

Originally Posted by dolphman88

i have an automatic 71.. and a 64 with a muncie... IMO go with the 4spd...

just FWIW....both are 4 speeds

**ChiefRocka** · 01-13-2009, 10:18 AM

TTT for no progress on the truck...pushed off to the side, as you can see from the pics.
-
-
However, getting the ball rolling (fast) on the Z069....
-
-

-

-
It's becoming a storage spot.....
-

-

**Chevy Fleetside** · 01-13-2009, 10:50 AM

hotrodhomi · 01-13-2009, 10:50 AM

looks good chief.

jason65 · 01-13-2009, 11:14 AM

I think the ls7 should go in the chief. That would really rocka.

4dranch · 01-13-2009, 11:18 AM

John,
I really like the Jed Clampet back seat in the cheif..

joe231 · 01-13-2009, 11:48 AM

Hey John,
you previously mentioned buying parts from "classic"....
which "classic" would that be? Parts, Chevy, Industries?
thanks man
Vette is looking sik!!

**ChiefRocka** · 01-14-2009, 01:18 AM

Quote:

Originally Posted by Chevy Fleetside

Quote:

Originally Posted by hotrodhomi

looks good chief.

Thanks....

Quote:

Originally Posted by jason65

I think the ls7 should go in the chief. That would really rocka.

Dude, that would be insane !! I wish I had one for the Chief, My Nova, My Jet-boat, my Samurai, my 57 wagon, my wifes Honda Element...

Quote:

Originally Posted by 4dranch

John,
I really like the Jed Clampet back seat in the cheif..

I like it too....wonder if the SJPD would let it slide, what'd'ya think SLEPY SAL ??

Quote:

Originally Posted by joe231

Hey John,
you previously mentioned buying parts from "classic"....
which "classic" would that be? Parts, Chevy, Industries?
thanks man
Vette is looking sik!!

Joe, it was Classic Parts. I ordered a few things from them (shown in the build thread) Also ordered complete door reseal kits...I mean COMPLETE they came with everything. Waiting till after bodywork for that....untill then, my doors will retain the rat-rod-rattle.

The Vette is looking good...thanks !!

4dranch · 01-14-2009, 09:11 AM

**ChiefRocka** · 01-14-2009, 10:33 AM

Yeah !!!

CSoliz · 01-16-2009, 12:26 AM

Chief,

When you ran your harness through your inner fender, how did you support it under there? any pics?

Bazooka · 01-20-2009, 05:17 PM

John, What size tires you got on your truck? Thanks man

**ChiefRocka** · 01-20-2009, 11:01 PM

I am running Denman G78-15s....I gonna pull the beauty rings off...I think it looks better without them..you can see more of the RED rim.

If I went with black rims, then the ring would be ok, I think,

joe231 · 01-20-2009, 11:07 PM

have you gotten anywhere with the 700R4 swap?
i'm gonna be building a trans x-member in the next couple days....was just wondering

**ChiefRocka** · 01-20-2009, 11:11 PM

Not yet man...been too busy on the Vette....

I was gonna get one from Bowtie, but I might have to fabricate one up now that you are !

joe231 · 01-20-2009, 11:13 PM

I have some tube laying around the shop so I figured I would save a 175 bones.....
i think we need some Vette updates too while you are at it

**ChiefRocka** · 01-20-2009, 11:15 PM

I have plenty, just don't a MOD zap'n me for posting non-truck pics !!

joe231 · 01-20-2009, 11:17 PM

that won't happen....will it?

**ChiefRocka** · 01-20-2009, 11:20 PM

Let's try:
-
-
-
Moved to the interior for more scrape'n and clean'm....
-
-

-
Couple shots thru the heater opening...
-

-

-
After pulling the carpet, I found the dimmer switch and pedal....Cool, never knew that about the vettes.
-

-

-
Next it was time to remove the column mounts and the pedal assembly...
-

-

**ChiefRocka** · 01-20-2009, 11:21 PM

I'm back with a few more pics....A few days ago...I pulled the rear wheels off to tighten the rear body mounts, and finally hook up the rear spring...
-

-

-
Hmm....mabey the raised letter looks better on the outside
-

-

**ChiefRocka** · 01-20-2009, 11:23 PM

-

-
Once on bench...I disassembled it for clean up and rebuild...The bracing will all be blasted and painted, while the three pedal arms will be powder-coated black...
-

-

**ChiefRocka** · 01-20-2009, 11:24 PM

I found the clutch pedal pin slightly worn...so before coating, I cut it loose and welded a new one in...
-
-

-

-
-
Yesterday, I pushed her outside in the nice California weather we are having right now....to do a final wire-wheel cleaning of the inside, before some paint and the DynaMat goes in...
-

-

-
Here I'm using my old "I don't care if it burns out" wire wheel drill...
-

-

-
That's it for now.....Monday or Tuesday should be starting the DynaMat....

joe231 · 01-20-2009, 11:51 PM

that is gonna be one SWEET ride!!!
nice work!

mnky30 · 01-21-2009, 02:10 AM

john
that vett is going to be one sweet ride when you are done with it.

scotts62 · 01-21-2009, 07:27 AM

I see a budweiser playing peekaboo

Lookin good Chief!!

01-13-2009, 10:18 AM	#527
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... TTT for no progress on the truck...pushed off to the side, as you can see from the pics. - - However, getting the ball rolling (fast) on the Z069.... - - - - It's becoming a storage spot..... - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-13-2009, 10:50 AM	#528
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,781	Re: Project "Rock-a-Billy".....Saga Continues..... __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

01-13-2009, 10:50 AM	#529
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Project "Rock-a-Billy".....Saga Continues..... looks good chief. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

01-13-2009, 11:14 AM	#530
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Project "Rock-a-Billy".....Saga Continues..... I think the ls7 should go in the chief. That would really rocka.

01-13-2009, 11:18 AM	#531
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project "Rock-a-Billy".....Saga Continues..... John, I really like the Jed Clampet back seat in the cheif.. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-13-2009, 11:48 AM	#532
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project "Rock-a-Billy".....Saga Continues..... Hey John, you previously mentioned buying parts from "classic".... which "classic" would that be? Parts, Chevy, Industries? thanks man Vette is looking sik!! __________________ *CHEVY ONLY*

01-14-2009, 09:11 AM	#534
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project "Rock-a-Billy".....Saga Continues..... Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-14-2009, 10:33 AM	#535
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... Yeah !!! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-16-2009, 12:26 AM	#536
CSoliz Torn between 66 and 78 Join Date: May 2008 Location: So. Cal. Posts: 253	Re: Project "Rock-a-Billy".....Saga Continues..... Chief, When you ran your harness through your inner fender, how did you support it under there? any pics?

01-20-2009, 05:17 PM	#537
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Project "Rock-a-Billy".....Saga Continues..... John, What size tires you got on your truck? Thanks man

01-20-2009, 11:01 PM	#538
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... I am running Denman G78-15s....I gonna pull the beauty rings off...I think it looks better without them..you can see more of the RED rim. If I went with black rims, then the ring would be ok, I think, __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 01-20-2009 at 11:03 PM.

01-20-2009, 11:07 PM	#539
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project "Rock-a-Billy".....Saga Continues..... have you gotten anywhere with the 700R4 swap? i'm gonna be building a trans x-member in the next couple days....was just wondering __________________ *CHEVY ONLY*

01-20-2009, 11:11 PM	#540
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... Not yet man...been too busy on the Vette.... I was gonna get one from Bowtie, but I might have to fabricate one up now that you are ! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-20-2009, 11:13 PM	#541
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project "Rock-a-Billy".....Saga Continues..... I have some tube laying around the shop so I figured I would save a 175 bones..... i think we need some Vette updates too while you are at it __________________ *CHEVY ONLY*

01-20-2009, 11:15 PM	#542
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... I have plenty, just don't a MOD zap'n me for posting non-truck pics !! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

01-20-2009, 11:17 PM	#543
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project "Rock-a-Billy".....Saga Continues..... that won't happen....will it? __________________ *CHEVY ONLY*

01-20-2009, 11:20 PM	#544
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... Let's try: - - - Moved to the interior for more scrape'n and clean'm.... - - - Couple shots thru the heater opening... - - - After pulling the carpet, I found the dimmer switch and pedal....Cool, never knew that about the vettes. - - - Next it was time to remove the column mounts and the pedal assembly... - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-20-2009, 11:21 PM	#545
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... I'm back with a few more pics....A few days ago...I pulled the rear wheels off to tighten the rear body mounts, and finally hook up the rear spring... - - - Hmm....mabey the raised letter looks better on the outside - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-20-2009, 11:23 PM	#546
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... - - - - - - Once on bench...I disassembled it for clean up and rebuild...The bracing will all be blasted and painted, while the three pedal arms will be powder-coated black... - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-20-2009, 11:24 PM	#547
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... I found the clutch pedal pin slightly worn...so before coating, I cut it loose and welded a new one in... - - - - - - Yesterday, I pushed her outside in the nice California weather we are having right now....to do a final wire-wheel cleaning of the inside, before some paint and the DynaMat goes in... - - - - Here I'm using my old "I don't care if it burns out" wire wheel drill... - - - - - That's it for now.....Monday or Tuesday should be starting the DynaMat.... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-20-2009, 11:51 PM	#548
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project "Rock-a-Billy".....Saga Continues..... that is gonna be one SWEET ride!!! nice work! __________________ *CHEVY ONLY*

01-21-2009, 02:10 AM	#549
mnky30 Registered User Join Date: Apr 2007 Location: santa rosa california Posts: 226	Re: Project "Rock-a-Billy".....Saga Continues..... john that vett is going to be one sweet ride when you are done with it. __________________ vinnie 1960 chevy c10 frame with a 1966 cab 2002 dodge intrepid r/t 2004 chevy 2500 4 door short bed

01-21-2009, 07:27 AM	#550
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Project "Rock-a-Billy".....Saga Continues..... I see a budweiser playing peekaboo Lookin good Chief!! __________________ Scott 93 crew cab build Project 62

Register or Log In To remove these advertisements.