![]() |
![]() |
#526 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Also have the rear cab and speaker panels about as done as I can get them lol turning out quite nicely! Just have to pull he driver side one back off and drill the holes for the crossovers to be mounted in there but other wise quite happy with it!
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#527 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Also got the terrain console mounted back in to finish the electrical wiring connectors n such. Found out going to have to lift the back of the console 3/4 of an inch to allow the console lid to open near fully :/ grrr always something lol. Will order some aluminum bar and fix that problem very soon. Also will begetting a 2016 Camaro center vent assembly in for experimenting with for a set of center vents it may or may now work but going to give it a shot lol.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#528 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
![]() Sean Captainfab yep using a heat gun for the bends and folds doesn't take a whole lotta heat to get things bent!
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#529 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
well got the glove box completed and rough shaped quite happy with how it turned out. If I make any more it will go much easier since I now know the mistakes that can happen making them rotflmao!!!! That and a better plastic bending setup then two pieces of lumber lol
But since most people won't be looking up under the dash I call this project done. Once the paint is complete can finish installing the AC vent hoses then put this up inside piece by piece. One of the mistakes is its the factory size and being made out of the abs does not install except in pieces lol. oh well happy with it plenty of clearance in the back for the vent hoses etc so its all good. Just have tot ake it apart and clean up all the scribing lines with a lil paint remover and all done ![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#530 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Put a deposit down with a custom radiator inter cooler builder up here locally and he has started on this project. he has gotten off to a good start. The radiator is going to be inset into the new core support and 27 inches tank to tank.
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#531 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 1964 GMC 3/4 ton build :D
That's going to be nice
![]()
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#532 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Yeah captainfab he did most of that in one evening lol.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#533 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
he is making progress rapidly.... for securement going with a set of rivet nuts that can be tack welded to help keep them from breaking loose and rotating
![]() ![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#534 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 1964 GMC 3/4 ton build :D
The radiator support is looking good
![]() When installed correctly, rivnuts should not spin.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#535 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Captainfab,
Lol not gonna take any chances murphy loves tormenting me pretty consistently of late. Got a breather tho my wife exercised and blessed the garage rotflmao!!!!! 3 months so far can continue to hope ![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#536 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
ok a few more pictures from last night placement check and test fit really getting excited seeing this come together. This guy definitely worth hiring
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#537 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
been working on quite a few projects recently. the core support is coming along slowly got everything mocked up and found my driver side innder fender is pretty badly warped. So after digging around have an OEM unit on the way and see where that gets me lol. Also scrapped the terrain console project just was not working quite like I wanted. So I have started a new console mod project will be posting up pictures of it in the next few days. It fits the cab much better and gives me more room for components and such on the facing panel.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#538 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Ok here we go promised pics of the new console and how it is shaping up. Going to have to redo the front face panel got my vent hole dimensions off quite a bit so that panel is trashed :/ but otherwise fitting quite nicely. Plenty of space for louvers, trans temp gauge, usb port mounts. The shifter mounting plates I am currently waiting on to come in tomorrow so I can get that cut out and ready.
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#539 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Went back to working on the alignment of the aluminum core support. Builder is drilling the front brace holes tonight then slowly start aligning everything as the front end is slowly put back together
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#540 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
also got the firewall pass through panel installed and hooked into the main harness. got to worrying I may not have good connections throughout this custom setup but then thought well it either does or it does not lol. Ifn I have to will pull it out after everything is assembled and I can test it out
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#541 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
And last but not least got the parts in and the shift is mounted in the console fits much better then on the terrain console. Face panel is all finished just did not get any pictures of it but definitely have room for everything on it
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#542 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 1964 GMC 3/4 ton build :D
What is the new console out of? It does look to fit better.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#543 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
07 land rover has captain fab yeah fits a ton better
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#544 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Well some more updates. converting the truck to electric e brake system has been an interesting journey but I am waiting on a few more things to come in and work on it some more. I could not get the land rover switch working so I made a filler panel to mount the switches for it in, Also finished the face panel and side panels for the front of the console. Had to do a lil rework on the e brake cable mounts and the pull bar on the factory setup.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#545 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
And back to the aluminum core support got the center mounting bolt holes lined up and drilled :/ only to run into the inner fender nose is hitting one of the radiator mounting bungs grrrrrr... the builder is going to come over and look at it kinda stumped but working at it worked ok once and now we have issues lol. the 4 holes are perfectly measured out and match the factory one so I guess we will see what is going on when he gets by.....
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#546 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Also got the pink bed removed from the frame and flipped over so I can get to all them blasted rusted perimeter bolts lol will be working on getting some of them out this thursday
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() Last edited by sdwolff98; 04-01-2018 at 09:15 PM. |
![]() |
![]() |
![]() |
#547 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 1964 GMC 3/4 ton build :D
Are those calipers GM or aftermarket?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#548 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Captainfab stainless steel brakes company triple piston s already checked they fit the rear disc brackets I adapted to my factory Dana 60
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#549 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 1964 GMC 3/4 ton build :D
I didn't realize that anyone made aftermarket brake parts for the 2500's. If they're SSBC, I'm sure they are a bit more than $300 new.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#550 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
|
Re: 1964 GMC 3/4 ton build :D
Captainfab ooohhhh yeah a grand for a new set from summit like these I got just happened to be at right place and time.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|