My Crew Cab Short Bed Project, AKA "Project Destiny" - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bjcaldwe · 06-28-2010, 10:21 PM

Too hot to be drumk

RandyP · 06-28-2010, 09:59 PM

I was not going to say a word. But... if you're gonna be a bear, be a GRIZZLY BEAR!!!!!

joe231 · 06-28-2010, 10:05 PM

oops

joe231 · 06-28-2010, 10:22 PM

damn Chuck must be the designated ball-buster tonight

BTW Chuck,
did you get your coys?

*Stitch* · 06-28-2010, 10:26 PM

Nope and nope. I had a kinda bad night and I'm taking out my frustration on y'all. Just kidding

. But really I did have a pretty crappy evening but this is cheering me up. And that's a big negative ghostrider on the coys... Maybe next time. I did get the front end of the crewcab off and ready to swap the airbox and the motor and trans and got the bed off so I can get the tanks mounted and the brakeline shortened

joe231 · 06-28-2010, 10:28 PM

so are you keeping the CCSB?
what happened?

Michael is looking for a CCSB, BTW

*Stitch* · 06-28-2010, 10:45 PM

I'm going to put the ccsb together and make it a driver. I don't know what's going to happen when it's done or in the meantime lol

and who's Micheal

*BGRAFX* · 06-28-2010, 10:48 PM

Here I am! l was getting drumk after selling my dually tonight. Now I need a CCSB!!!

joe231 · 06-28-2010, 10:51 PM

That's him!

*Stitch* · 06-28-2010, 10:55 PM

Kansas is a LONG way away and you don't have a dually to tow it back now lol

joe231 · 06-28-2010, 11:05 PM

you'll have to get it running for him

*Stitch* · 06-28-2010, 11:11 PM

Getting it running is definitely in the plans. I'm off the whole week after july 4th so well see how much I can get done. Once I get the airbox swapped out for A/C airbox I'll be ready to drop the motor in. I also gotta get the TBI harness swapped out. Learned yesterday that the old tbi caught on fire in this truck so there's a couple connectors that were on the throttle body that got burned up. No worries though I have another harness

joe231 · 06-28-2010, 11:22 PM

Cool man!
I guess you know the firewalls are different between A/C and non A/C cabs. I ran into the PO's hack job on this truck so I cut out the airbox area from my donor 'burb. Also the drivers side upper kick panel has a hole for the fresh air vent that you will need to cover....

*Stitch* · 06-28-2010, 11:40 PM

Yeah thanks for the info. I have some of the stuff left over from my dads trick that I'm gonna use. I think I'm gonna just hack my firewall unless I can find a ac firewall section I can get quickly. Also I have the whole ac system inside and out for it. If for some reason I keep it I'll have to have ac in there for my wife to drive it. Period lol

*87 chevy silverado* · 06-29-2010, 02:59 AM

Quote:

Originally Posted by Fat Hoe

Yeah thanks for the info. I have some of the stuff left over from my dads trick that I'm gonna use. I think I'm gonna just hack my firewall unless I can find a ac firewall section I can get quickly. Also I have the whole ac system inside and out for it. If for some reason I keep it I'll have to have ac in there for my wife to drive it. Period lol

pull a part? : )

JohnC · 06-29-2010, 08:23 AM

Quote:

Originally Posted by RandyP

I was not going to say a word. But... if you're gonna be a bear, be a GRIZZLY BEAR!!!!!

My daughter's softball coach said that same quote all the time.

So how is the dash coming along? I would imagine with the heat we've had lately it's literally been a sweat shop operation you have going on.

joe231 · 06-28-2010, 11:45 PM

Yeah, a/c was a must for is too

*BGRAFX* · 07-05-2010, 12:37 AM

Happy 4th man! Did u blow anything up or work on the crew any?

joe231 · 07-05-2010, 12:41 AM

Happy 4th to everyone here as well!!!!!!!!!!!!

Quote:

Originally Posted by JohnC

My daughter's softball coach said that same quote all the time.

So how is the dash coming along? I would imagine with the heat we've had lately it's literally been a sweat shop operation you have going on.

Quote:

Originally Posted by BGRAFX

Happy 4th man! Did u blow anything up or work on the crew any?

I did some stuff to the '80 trying to get it more presentable.
and the wife worked on covering my dash....not a lot but...
I sealed the deal on some wheels for the crew also, going to get them next weekend...keep your fingers crossed and wish me luck

**scotts62** · 07-05-2010, 12:42 AM

Heck yeah!! Good luck, again..

joe231 · 07-05-2010, 01:20 AM

thanks!!
Oh and this time the truck isn't involved.....

**scotts62** · 07-05-2010, 11:22 AM

Well even better!

baclay9 · 07-05-2010, 11:28 AM

What wheels are you getting Joe?

joe231 · 07-05-2010, 11:49 AM

Quote:

Originally Posted by baclay9

What wheels are you getting Joe?

Boss 338's in gray.

**scotts62** · 07-05-2010, 12:11 PM

06-28-2010, 10:21 PM	#1
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Too hot to be drumk __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

06-28-2010, 09:59 PM	#2
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" I was not going to say a word. But... if you're gonna be a bear, be a GRIZZLY BEAR!!!!!

06-28-2010, 10:05 PM	#3
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" oops __________________ *CHEVY ONLY*

06-28-2010, 10:22 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" damn Chuck must be the designated ball-buster tonight BTW Chuck, did you get your coys? __________________ *CHEVY ONLY* Last edited by joe231; 06-28-2010 at 10:23 PM.

06-28-2010, 10:26 PM	#5
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Nope and nope. I had a kinda bad night and I'm taking out my frustration on y'all. Just kidding . But really I did have a pretty crappy evening but this is cheering me up. And that's a big negative ghostrider on the coys... Maybe next time. I did get the front end of the crewcab off and ready to swap the airbox and the motor and trans and got the bed off so I can get the tanks mounted and the brakeline shortened

06-28-2010, 10:28 PM	#6
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" so are you keeping the CCSB? what happened? Michael is looking for a CCSB, BTW __________________ *CHEVY ONLY* Last edited by joe231; 06-28-2010 at 10:29 PM.

06-28-2010, 10:45 PM	#7
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" I'm going to put the ccsb together and make it a driver. I don't know what's going to happen when it's done or in the meantime lol and who's Micheal

06-28-2010, 10:48 PM	#8
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Here I am! l was getting drumk after selling my dually tonight. Now I need a CCSB!!!

06-28-2010, 10:51 PM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" That's him! __________________ *CHEVY ONLY*

06-28-2010, 10:55 PM	#10
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Kansas is a LONG way away and you don't have a dually to tow it back now lol

06-28-2010, 11:05 PM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" you'll have to get it running for him __________________ *CHEVY ONLY*

06-28-2010, 11:11 PM	#12
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Getting it running is definitely in the plans. I'm off the whole week after july 4th so well see how much I can get done. Once I get the airbox swapped out for A/C airbox I'll be ready to drop the motor in. I also gotta get the TBI harness swapped out. Learned yesterday that the old tbi caught on fire in this truck so there's a couple connectors that were on the throttle body that got burned up. No worries though I have another harness

06-28-2010, 11:22 PM	#13
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Cool man! I guess you know the firewalls are different between A/C and non A/C cabs. I ran into the PO's hack job on this truck so I cut out the airbox area from my donor 'burb. Also the drivers side upper kick panel has a hole for the fresh air vent that you will need to cover.... __________________ *CHEVY ONLY*

06-28-2010, 11:40 PM	#14
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Yeah thanks for the info. I have some of the stuff left over from my dads trick that I'm gonna use. I think I'm gonna just hack my firewall unless I can find a ac firewall section I can get quickly. Also I have the whole ac system inside and out for it. If for some reason I keep it I'll have to have ac in there for my wife to drive it. Period lol

06-28-2010, 11:45 PM	#17
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Yeah, a/c was a must for is too __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

07-05-2010, 12:37 AM	#18
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Happy 4th man! Did u blow anything up or work on the crew any?

07-05-2010, 12:42 AM	#20
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Heck yeah!! Good luck, again.. __________________ Scott 93 crew cab build Project 62

07-05-2010, 01:20 AM	#21
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" thanks!! Oh and this time the truck isn't involved..... __________________ *CHEVY ONLY*

07-05-2010, 11:22 AM	#22
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Well even better! __________________ Scott 93 crew cab build Project 62

07-05-2010, 11:28 AM	#23
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" What wheels are you getting Joe?

07-05-2010, 12:11 PM	#25
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" __________________ Scott 93 crew cab build Project 62

Register or Log In To remove these advertisements.