OR 100's of misc parts from the last 6 trucks parted out - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roger0080 · 11-05-2013, 12:16 AM

Quote:

Originally Posted by tll74

Yes it is a WC truck. I'll get pics

Still hoping to get pics of the crossmember piece, when you get time. -Roger

**Homebuilt Hotrods** · 11-01-2013, 01:40 PM

Im sorry I was too lazy to read the entire post, but do you have any auto brake pedal assemblys? If so how much are you asking shipped to South Dakota 57110.

**tll74** · 11-02-2013, 01:11 AM

Quote:

Originally Posted by Homebuilt Hotrods

Im sorry I was too lazy to read the entire post, but do you have any auto brake pedal assemblys? If so how much are you asking shipped to South Dakota 57110.

At 561 post I would either! No problem...I have several of them. 45.00 Shipped. Thanks, Tom

**Homebuilt Hotrods** · 11-02-2013, 01:45 AM

I'll take one auto trans brake pedal assembly. Do you have any pictures? Thank you. I can PayPal in the am.

**tll74** · 11-02-2013, 12:33 PM

Quote:

Originally Posted by Homebuilt Hotrods

I'll take one auto trans brake pedal assembly. Do you have any pictures? Thank you. I can PayPal in the am.

I couldn't get a pic of it till Monday. I can tell you that with many of these I can pick out a very nice one. PM coming next.

sambudo · 11-02-2013, 12:51 PM

do you have any tailgate hinges? i need a set. Name: hinges each.jpg
Views: 259
Size: 41.9 KB

**Homebuilt Hotrods** · 11-02-2013, 01:33 PM

Quote:

Originally Posted by tll74

I couldn't get a pic of it till Monday. I can tell you that with many of these I can pick out a very nice one. PM coming next.

Payment sent your way. Thanks very much! Very thankful to find parts at good prices, what an awesome site!!!!

bluek5 · 11-02-2013, 07:15 PM

Tom,
I am going to put a dana 60 in place of my eaton in a 72 C20. I need the rear section of the driveine for a dana 60. If you have one how much shipped to 84043?
Thanks, Paul

thompson1970 · 11-03-2013, 09:16 AM

i am looking for a driveshaft for a 1970 lwb sm465 np205 it measures about 59 1/2 inches from center to center.

thanks.

rich67 · 11-04-2013, 12:07 AM

hey tom its cool on the park/turns. teeitup is hookin me up. is that shifter operated by a cable? also any luck on the eyebrows? sorry had to ask. lol thanx rich

shafer3 · 11-07-2013, 04:10 PM

Do you have a gas pedal, gas pedal assambaly and the linkage for a 1969 chevy truck?

**tll74** · 11-08-2013, 02:20 AM

Quote:

Originally Posted by sambudo

do you have any tailgate hinges? i need a set.Attachment 1169886

Sure no problem, 42.00 shipped on all four pieces.

Quote:

Originally Posted by Homebuilt Hotrods

Payment sent your way. Thanks very much! Very thankful to find parts at good prices, what an awesome site!!!!

Pedal assy shipped. Thanks

Quote:

Originally Posted by bluek5

Tom,
I am going to put a dana 60 in place of my eaton in a 72 C20. I need the rear section of the driveine for a dana 60. If you have one how much shipped to 84043?
Thanks, Paul

50.00 plus about 25.00 shipping. I can check for exact cost if this works for you.

Quote:

Originally Posted by thompson1970

i am looking for a driveshaft for a 1970 lwb sm465 np205 it measures about 59 1/2 inches from center to center.

thanks.

I have a couple trucks with them I'll get a measurement.

Quote:

Originally Posted by rich67

hey tom its cool on the park/turns. teeitup is hookin me up. is that shifter operated by a cable? also any luck on the eyebrows? sorry had to ask. lol thanx rich

I believe the shifter has a rod but would have to look to be sure. I looked and can not find any good eyebrows.

Quote:

Originally Posted by roger0080

Still hoping to get pics of the crossmember piece, when you get time. -Roger

Pic below. It does have some surface rust. I could acid dip it for you and it would totally rust free.

Quote:

Originally Posted by shafer3

Do you have a gas pedal, gas pedal assambaly and the linkage for a 1969 chevy truck?

Yes I do for a sb V8 2wd. 30.00 plus shipping.

Thanks, Tom

rich67 · 11-08-2013, 02:30 AM

Tom I will take the shifter. How do you want payment?

altunaa · 11-10-2013, 06:51 PM

hi, is there any headlamp switch still available?

roger0080 · 11-11-2013, 01:16 PM

Thanks for the picture of the crossmember. That would do just fine for what I have.

As long as you are cutting & selling, would you sell the rear crossmember also ? I'll have the box off next year so I might as well do that one also. I wish I could do the acid bath but that would be overkill for my work truck. Thanks. You've saved another truck for the next 20 years!

PM me with payment info when you get time.
-Roger

**tll74** · 11-13-2013, 03:12 AM

Quote:

Originally Posted by altunaa

hi, is there any headlamp switch still available?

10.00 shipped

Quote:

Originally Posted by roger0080

Thanks for the picture of the crossmember. That would do just fine for what I have.

As long as you are cutting & selling, would you sell the rear crossmember also ? I'll have the box off next year so I might as well do that one also. I wish I could do the acid bath but that would be overkill for my work truck. Thanks. You've saved another truck for the next 20 years!

PM me with payment info when you get time.
-Roger

Pm coming next.

I will be gone elk hunting from tomorrow till the 24th. Thanks, Tom

**TBONE1964** · 11-13-2013, 03:43 AM

Quote:

Originally Posted by tll74

10.00 shipped

Pm coming next.

I will be gone elk hunting from tomorrow till the 24th. Thanks, Tom

Happy Hunting there sir. Good luck and have a great holiday.

BlacklandCamper · 11-13-2013, 03:31 AM

Are the Custom/20 emblems available?

altunaa · 11-19-2013, 05:03 PM

any wiper washer switch available? can you post a pic?

**tll74** · 11-24-2013, 02:06 PM

Quote:

Originally Posted by BlacklandCamper

Are the Custom/20 emblems available?

Yes, I have them restored and just take off's. 27.50 for unrestored and 45.00 for a very nice pair polished and repainted with the correct paint. Plus 8.00 shipping.

Quote:

Originally Posted by TBONE1964

Happy Hunting there sir. Good luck and have a great holiday.

Hey Tom, We had great trip! We just got back late last night. Look me up when your back in town. Maybe we can take the ladies out for dinner.

Quote:

Originally Posted by altunaa

any wiper washer switch available? can you post a pic?

Yes I have tons of them. 10.00 shipped.

Thanks, Tom

b.sharp · 11-25-2013, 11:42 AM

Looking for the front fender chrome/stainless for a '67-'68 GMc fender. Do you have any?

Thank you,

diver · 11-25-2013, 02:37 PM

hello,looking to buy steering wheel and cap for 1967,tire carrier /complete with all hardware and rear lamp intermediate harness short bed step.side.thanks

diver · 11-25-2013, 02:40 PM

any 67-68 tow hooks

**tll74** · 11-25-2013, 05:52 PM

Quote:

Originally Posted by b.sharp

Looking for the front fender chrome/stainless for a '67-'68 GMc fender. Do you have any?

Thank you,

Sorry, none right now that don't have damage.

Quote:

Originally Posted by diver

hello,looking to buy steering wheel and cap for 1967,tire carrier /complete with all hardware and rear lamp intermediate harness short bed step.side.thanks

Chevy or GMC center cap? In box or under box spare carrier? Nothing on the wiring.

Quote:

Originally Posted by diver

any 67-68 tow hooks

The only tow hooks I have are the 69-71 type.

Thanks, Tom

diver · 11-25-2013, 06:04 PM

hello looking to buy steering wheel 67 chevy,horn cap,tire carrier under bed all hardware,rear lamp intermediate harness for short bed step side thanks

11-01-2013, 01:40 PM	#2
Homebuilt Hotrods Senior Member Join Date: May 2012 Location: Black Hills, SD Posts: 347	Re: 100's of misc parts from the last 6 trucks parted out Im sorry I was too lazy to read the entire post, but do you have any auto brake pedal assemblys? If so how much are you asking shipped to South Dakota 57110. __________________ Garage Built

11-02-2013, 01:45 AM	#4
Homebuilt Hotrods Senior Member Join Date: May 2012 Location: Black Hills, SD Posts: 347	Re: 100's of misc parts from the last 6 trucks parted out I'll take one auto trans brake pedal assembly. Do you have any pictures? Thank you. I can PayPal in the am. __________________ Garage Built

11-02-2013, 12:51 PM	#6
sambudo Registered User Join Date: Oct 2013 Location: Vancouver,Wa Posts: 339	Re: 100's of misc parts from the last 6 trucks parted out do you have any tailgate hinges? i need a set. __________________ 1968 C10, 250, L6 4spd OTF, Fleetside Upgrades: Power Steering .......................____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

11-02-2013, 07:15 PM	#8
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 100's of misc parts from the last 6 trucks parted out Tom, I am going to put a dana 60 in place of my eaton in a 72 C20. I need the rear section of the driveine for a dana 60. If you have one how much shipped to 84043? Thanks, Paul

11-03-2013, 09:16 AM	#9
thompson1970 Registered User Join Date: Oct 2013 Location: norwalk ct Posts: 7	Re: 100's of misc parts from the last 6 trucks parted out i am looking for a driveshaft for a 1970 lwb sm465 np205 it measures about 59 1/2 inches from center to center. thanks.

11-04-2013, 12:07 AM	#10
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 100's of misc parts from the last 6 trucks parted out hey tom its cool on the park/turns. teeitup is hookin me up. is that shifter operated by a cable? also any luck on the eyebrows? sorry had to ask. lol thanx rich

11-07-2013, 04:10 PM	#11
shafer3 Registered User Join Date: Oct 2013 Location: grants pass oregon Posts: 2	Re: 100's of misc parts from the last 6 trucks parted out Do you have a gas pedal, gas pedal assambaly and the linkage for a 1969 chevy truck?

11-08-2013, 02:30 AM	#13
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 100's of misc parts from the last 6 trucks parted out Tom I will take the shifter. How do you want payment?

11-10-2013, 06:51 PM	#14
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: 100's of misc parts from the last 6 trucks parted out hi, is there any headlamp switch still available?

11-11-2013, 01:16 PM	#15
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 626	Re: 100's of misc parts from the last 6 trucks parted out Thanks for the picture of the crossmember. That would do just fine for what I have. As long as you are cutting & selling, would you sell the rear crossmember also ? I'll have the box off next year so I might as well do that one also. I wish I could do the acid bath but that would be overkill for my work truck. Thanks. You've saved another truck for the next 20 years! PM me with payment info when you get time. -Roger __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71...

11-13-2013, 03:31 AM	#18
BlacklandCamper Registered User Join Date: Sep 2013 Location: Farmersville, TX Posts: 238	Re: 100's of misc parts from the last 6 trucks parted out Are the Custom/20 emblems available? __________________ Grunt: 1971 C20 Custom Camper. Runs/Drives/Kinda stops. 350Ci, TH350. 4.10:1 D60. Eight Lug LWB is more better. Hell no its not fast! Donkey: 93 Nissan D21, the farm truck. My 1/2 ton SWB. The Indomitable Datsun. 1st BN 3rd MAR. '00-'04

11-19-2013, 05:03 PM	#19
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: 100's of misc parts from the last 6 trucks parted out any wiper washer switch available? can you post a pic?

11-25-2013, 11:42 AM	#21
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 100's of misc parts from the last 6 trucks parted out Looking for the front fender chrome/stainless for a '67-'68 GMc fender. Do you have any? Thank you,

11-25-2013, 02:37 PM	#22
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: 100's of misc parts from the last 6 trucks parted out hello,looking to buy steering wheel and cap for 1967,tire carrier /complete with all hardware and rear lamp intermediate harness short bed step.side.thanks

11-25-2013, 02:40 PM	#23
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: 100's of misc parts from the last 6 trucks parted out any 67-68 tow hooks



Register or Log In To remove these advertisements.

11-25-2013, 06:04 PM	#25
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: 100's of misc parts from the last 6 trucks parted out hello looking to buy steering wheel 67 chevy,horn cap,tire carrier under bed all hardware,rear lamp intermediate harness for short bed step side thanks

Register or Log In To remove these advertisements.