The Ultimate Craigslist find thread

[5Tractorguy]

This one's too good not to share... A friend of mine out in MN just sent me this on FB marketplace this morning. If only I was closer or had more room, the '61 could use some company.

It's a 1965 GMC 4000 with 2,880 miles according to the seller, and I believe it...

[factorystock]

Originally Posted by 5Tractorguy

This one's too good not to share... A friend of mine out in MN just sent me this on FB marketplace this morning. If only I was closer or had more room, the '61 could use some company.

It's a 1965 GMC 4000 with 2,880 miles according to the seller, and I believe it...

Attachment 1894817 Attachment 1894818

Attachment 1894819 Attachment 1894820

Attachment 1894821

If anyone feels like they missed out on this nice one, here is another very nice GMC fire truck,but this one is heavier duty, the 5000 series.https://sfbay.craigslist.org/eby/cto...971163169.html

[C10 - C90 Bill]

I agree, real nice truck.

Love the Chrome package.

I would be making a Rollback out of this one.

No 2-Speed Rear, but great choice would be a 3-Speed Aux Trans added to it.

[Dannny B]

Originally Posted by C10 - C90 Bill

I agree, real nice truck.


No 2-Speed Rear, but great choice would be a 3-Speed Aux Trans added to it.

I have a good 4 speed Browny I could let go of.

[5Tractorguy]

Originally Posted by Dannny B

I have a good 4 speed Browny I could let go of.

Would this be a big truck brownie or one that would fit/squeeze in to a pickup?

[Dannny B]

It was on a 2 axle IH grip truck with a 6V-71 Detroit. It's not exactly petite but, it isn't gigantic either. I need to pull out the transmission pallet with a forklift and get the model number. If I remember correctly, it has both under-drive and overdrive. I also have a smaller overdrive like a Hone lying around. it was behind a Toyota 4 cyl bus engine in a B-20 Dodge van set of for trailering.

[Feel the 'Pane]

https://pueblo.craigslist.org/pts/d/...870816138.html

[HO455]

As my sister would say "how cute". 1951 GMC $6500. Not mine! Hop hauler as in hops for use in beer!

https://portland.craigslist.org/grg/...881973873.html

I have a 1951 GMC pick up with a 248 engine and a manual four-speed transmission With the Hi-Low rear end. I have The clean original title. This truck has 22,000 Original miles. It was used as a hop hauler around a farm in the Yakima Valley. It runs and drives and fires up better than most new rigs. I just replaced the mechanical fuel pump. That has already been converted to 12 Volt. It has all the exterior badges, chrome around the headlights, and just needs some glass replaced. They are all flat panels so easy to come by. The tires are in good shape and has the old-style Rims. I am asking 6500 OBO. If you have any questions or want different angle photos text or call

[NoStopN]

You could throw a short bed with some stepside fenders as dually fenders & have a fun litt...I mean a fun big ride.

[HO455]

Another unusual truck. 1946 Chevrolet with one of them foreign jobs under the hood. As a result there seems to be some confusion as to price. This is not mine!

https://portland.craigslist.org/mlt/...876176974.html

I am selling an 1946 2 ton truck that has a Jaguer V12 engine in it. It has a transmission in it as well. I dont know much about it. It was left to me on my land a few years ago. It is a fantastic project truck for someone. They dont make em like this anymore.
I have NO TITLE for this. Delivery is possible.
Asking $2000 or best offer.

[davischevy]

Local FB Marketplace, https://www.facebook.com/marketplace...8657730619914/

I wouldn't build it, but it sure is cool. Or maybe parts.

[Richard Jensen]

Not CL but interesting
https://www.purplewave.com/auction/1...mp_Truck-Texas

[regan wilson]

Originally Posted by Richard Jensen

Not CL but interesting
https://www.purplewave.com/auction/1...mp_Truck-Texas

The bid on this truck is 375 right now. It looks clean rust wise but it looks like every kid on the farm learned to drive in it. Auction ends today.

[Warrens69GMC]

1961 C40

https://sfbay.craigslist.org/scz/cto...964129176.html

[HO455]

Big GMC $1000. Not mine!

https://salem.craigslist.org/hvo/d/d...949237051.html

1972 GMC water truck- doesn’t run due to bad gas, will help load.

[C10 - C90 Bill]

Nice truck. Wide Fenders, Spoke Wheels, Low Miles and in real nice condition.

Strange no 2-Speed Rear though. It didn't say, but should be a 5-Speed anyway.

[C10 - C90 Bill]

Nice 9500.

I would definitely be looking at this one if it were closer.

Strange it states "Automatic Transmission" though when it is clearly a 10-Speed RR.

Interesting Shifter Handle. Looks like a custom add on.

[factorystock]

Originally Posted by C10 - C90 Bill

Nice 9500.

I would definitely be looking at this one if it were closer.

Strange it states "Automatic Transmission" though when it is clearly a 10-Speed RR.

Interesting Shifter Handle. Looks like a custom add on.

Looks like a pretty clean and well spec'ed heavy in the class B range with a GVW of 29K. Would make a excellent classic truck transport vehicle with a 5th wheel installed. I believe the handle on the steering column is the air to rear trailer brakes only system.

[C10 - C90 Bill]

Originally Posted by factorystock

I believe the handle on the steering column is the air to rear trailer brakes only system.

Right, also known as a Trolley Brake.

[Dannny B]

This doesn't seem like too bad of a price for a napco.
https://orangecounty.craigslist.org/...004017146.html

[C10 - C90 Bill]

Originally Posted by Dannny B

This doesn't seem like too bad of a price for a napco.
https://orangecounty.craigslist.org/...004017146.html

Beautiful truck. Front Grille is slightly bent, but beautiful truck.

[68panelman]

Nice burb indeed. Love them V6's,
Although...humffp, it's not a napco. Went on their website and they appear to be factory 12 and 44 axles.
I think these dealers see a early closed knuckle axle and automatically think it's a napco. There is no pictures of the front side of the axles, only rear, and show no removable "ham" like on a napco.
The V6 does look to have rebuild valve covers though..and that's about it. Do I like it? Yes, would I want it, no, not for $25g

[Dannny B]

For quite a while, There was a NAPCO Studebaker truck floating around for sale. That too didn't look to have NAPCO axles.

[VictoriaHardware]

Not mine

'66 C60, Long Island, NY $3,500

https://longisland.craigslist.org/ct...009610525.html

[HO455]

Does traffic got you down this may help. 1942 GMC with the right accessories! Not mine but I do covet it. Which is why I've posted it twice. Some buy it and save my family!

https://seattle.craigslist.org/see/c...005536996.html

'42 GMC CCKW 353, modified troop carrier. Shortened frame, off road fifth wheel road tractor. All wheel bearings and seals new, all 12 U-joints new, all brake drums turned, all brake slaves bored and rebuilt, all brake shoes re-lined, '72 292 Chev. bored to 300ci balanced and blueprinted professionally. Not even started yet. '72 2ton Chev. 4-speed trans. mated up to stock divorced transfer case. $3500.00 in eleven new tires 8.25 x 20. All aluminum fabricated M-48 ring mount and trolley reproduction. Non-op composite M2 Browning .50 cal. machine gun. All parts to finish included. All sheet-metal is bead blasted and acid etched. Needs some body work on all non painted parts. Truck was modified to drive at 55-60 MPH. Could be show stopper at parades and car shows. Was being built as a U.S. Navy, Pearl Harbor tribute. Could be easily made to reflect U.S. Army or Marines.
Need to sell, any reasonable offer considered. No trades,cash only. Truck has never been started.$ 7500.00 OBO