Do you need '64-'66 Chevy Truck Parts?

[Norselander]

Hello Tony, do you have any 16" wheels that you are selling? I need some good condition six-lug, 16" wheels with clips (raised center) or 16" wheels with nubs.

[valero]

hey tony...thanks again for those websites...i ve found a lot of much needed parts for a good price...

i had my truck up on a lift today, and i finally got a good look at the underbelly of the cab and how completely torn up it is...its only got sheet metal tacked to the floor board underneath the carpet where all the rust had eaten away at it...ugh...

needless to say, unless i wanna rip it apart and weld a full aftermarket floor panel to the old cab...which i dont wanna do cause i cant weld, lol, and having it done would suck my bank account dry...my only other option would be to look for a REPLACEMENT CAB...

no doors, gauges, bench needed...just the bare cab with an intact windshield and back window (small window preferably) and minimal rust

ANY AVAILABLE???

please let me know
thanks,

sean

[LILRED66]

sean:

Thanks for the inquiry. I don't any rust-free cab shells at this time, however, I can repair one, but the shipping would be cost prohibitive. I estimate transporting it to Chi-town to be $300.00 or better, because it would have to be put on a pallet and sent via truck line, common carrier.

Let me know if I can help you with a cab or other 4-5-6 Chevy truck parts in the future.

[valero]

Originally Posted by LILRED66

sean:

Thanks for the inquiry. I don't any rust-free cab shells at this time, however, I can repair one, but the shipping would be cost prohibitive. I estimate transporting it to Chi-town to be $300.00 or better, because it would have to be put on a pallet and sent via truck line, common carrier.

Let me know if I can help you with a cab or other 4-5-6 Chevy truck parts in the future.

ok, thanks tony...just wonderin though, how much would one cost if it was available?

[Dennis Brusenski]

Tony, do have any 63 GMC dash parts thanks dennis

[LILRED66]

Originally Posted by valero

ok, thanks tony...just wonderin though, how much would one cost if it was available?

I have sold good, used, rust-free cabs in the past for $600.00-$800.00, depending on if they were a small back window or big back window or a high hump tranny cover or a low hump tranny cover. Also, they were in the upper range if they had a title and matching VIN plate. I have never transported one, so I am only estimating it to be around $250.00-$300.00.

All in, you are looking at $850.00-$1,100.00 to get one to Chicago from Kansas City. I am sure there are better deals out there, but that is what my personal experience has been. I have also bought a number of cabs for $600.00-$800.00. If I am buying, I look for the best deal and if I am selling I am looking for the best deal.

In any case, please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

[LILRED66]

Originally Posted by Dennis Brusenski

Tony, do have any 63 GMC dash parts thanks dennis

Dennis:

Good morning and thanks for the opportunity. I have a few GMC dash parts, however, what dash parts are you looking for? Here are a few pictures of the items I have.

Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by Norselander

Hello Tony, do you have any 16" wheels that you are selling? I need some good condition six-lug, 16" wheels with clips (raised center) or 16" wheels with nubs.

Good morning and thanks for the inquiry. For the '60-'66 Chevy 1/2 ton trucks, the only stock steel wheels were 15" and those are the only years I deal with, so I won't be able to help you with these items. Please let me know if I can help you with other 4-5-6 Chevy turcks parts in the future.

[valero]

Originally Posted by LILRED66

I have sold good, used, rust-free cabs in the past for $600.00-$800.00, depending on if they were a small back window or big back window or a high hump tranny cover or a low hump tranny cover. Also, they were in the upper range if they had a title and matching VIN plate. I have never transported one, so I am only estimating it to be around $250.00-$300.00.

All in, you are looking at $850.00-$1,100.00 to get one to Chicago from Kansas City. I am sure there are better deals out there, but that is what my personal experience has been. I have also bought a number of cabs for $600.00-$800.00. If I am buying, I look for the best deal and if I am selling I am looking for the best deal.

In any case, please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

yeah, im not surprised that the shipping would be super expensive, although your price range seems very reasonable!...too bad im not in your area well again, thank you for the quick response...

im sure come spring and summer, there ll be some auctions and meets in my area, but in the meantime...any suggestions on where to look for decent cab? (aside from craigslist, and auto trader mags)

thanks for the help tony,

sean

[bigdon-70blazer]

Do you have any small hub caps that fit the clip style wheels?

[LILRED66]

Originally Posted by bigdon-70blazer

Do you have any small hub caps that fit the clip style wheels?

Don:

I sent you a PM regarding a factory set of painted bowtie dog dish hub caps with 9" centers that should fit your 8 lug wheels with clips.

Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[LinkbeltOE]

I need a 66 c10 hood can you help me out?

[lowest1]

Hello Tony,
Would you happen to have a good condition chrome GMC grill?

[LILRED66]

Originally Posted by LinkbeltOE

I need a 66 c10 hood can you help me out?

Good morning and thanks for the inquiry. I have 3 or 4 good, used, rust-free, dent-free 4-5-6 Chevy truck hoods, however, packaging & shipping will be a bit painful, I guess-timate $125.00-$150.00, via common carrier.

[LILRED66]

Originally Posted by lowest1

Hello Tony,
Would you happen to have a good condition chrome GMC grill?

I sold one of those beauties on eBay a year or so ago. Sorry I couldn't help you with this item, but please keep me in mind for other 4-5-6 Chevy truck parts in the future and thanks for the opportunity. Enjoy the day.

[bigdon-70blazer]

Originally Posted by LILRED66

Don:

I sent you a PM regarding a factory set of painted bowtie dog dish hub caps with 9" centers that should fit your 8 lug wheels with clips.

Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Actually they are 6 lug with clips but I think those will fit also...

[LILRED66]

Originally Posted by bigdon-70blazer

Actually they are 6 lug with clips but I think those will fit also...

I just need to know the diameter of the inner ring of the cap and I thought you said you needed 9". Is that the case?

[TwoFiftyShifter]

Tony, could you quote me on two things if you got em?

Short bed stepside steps

The two upper rad support braces

[bigdon-70blazer]

Originally Posted by LILRED66

I just need to know the diameter of the inner ring of the cap and I thought you said you needed 9". Is that the case?

I will go out and measure them tonite!

[LILRED66]

Originally Posted by TwoFiftyShifter

Tony, could you quote me on two things if you got em?

Short bed stepside steps

The two upper rad support braces

TwoFiftyShifter:

Thanks for the inquiry and the opportunity. You have a PM regarding the radiator support extensions and the short bed stepside steps.

[Dennis Brusenski]

Thanks for the quick replay, I need the one with the single large speedo and the two small gauges next to them. Thanks Dennis

[Dennis Brusenski]

Tony, sorry for confussion I need the silver dash face- Thanks Dennis

[LILRED66]

Dennis:

Is this what you are looking for?

[Dennis Brusenski]

Tony, yes that is the one.

[LILRED66]

Originally Posted by Dennis Brusenski

Tony, yes that is the one.

Dennis:

I just sold that one, but I have this one.