198Plus build - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

198plus · 12-29-2009, 11:01 PM

Thanks !!!!

Quote:

Originally Posted by MacAttack

Man, those intake assemblies are beautiful.

markeb01 · 12-29-2009, 07:00 PM

If you could hop in the wayback machine and take a quick trip to 1968, you could pick up a brand new one for less than $100. I imagine they are a tad more now -

198plus · 12-29-2009, 11:03 PM

Those where the days

Quote:

Originally Posted by markeb01

If you could hop in the wayback machine and take a quick trip to 1968, you could pick up a brand new one for less than $100. I imagine they are a tad more now -

jgh64pkup · 12-29-2009, 08:19 PM

i like the way the big block one looks
the way the carbs are not side by side

ruffrida2005 · 12-30-2009, 03:50 PM

what size carbs are those!

198plus · 12-30-2009, 09:29 PM

They are 4160's...... 450 CFM

Quote:

Originally Posted by ruffrida2005

what size carbs are those!

ruffrida2005 · 12-30-2009, 10:09 PM

dont think it will too much carb for the small block

daverod · 12-31-2009, 12:44 AM

Very cool.

Now I want two carbs.

It's only 900 cfm Ruff.

In just switched from a 750 to a 650 on my 460. Much better.

Did I say 460. ops.

jgh64pkup · 12-31-2009, 12:49 AM

tunnel rams for a sbc use the same size carbs

198plus · 01-03-2010, 08:51 PM

This makes me feel better about what I gave for my cross ram set up

http://cgi.ebay.com/ebaymotors/Vinta...Q5fAccessories

198plus · 01-03-2010, 11:47 PM

It will be fine with the right cam and heads........Just takes alot of tuning on the two four setup, but should be well worth it for the HP gain and looks.

Quote:

Originally Posted by ruffrida2005

dont think it will too much carb for the small block

198plus · 01-04-2010, 06:53 PM

Got the intake and carbs finished today......Amazing what a little clean up will do...........Took it to Millers Powder Coating for a little blasting and put in the polishing tumbler.

ruffrida2005 · 01-03-2010, 08:55 PM

you got one heck of a deal

TimE · 01-03-2010, 10:59 PM

That is a cool intake setup. One of these intakes just popped up for sale on another site I frequent.

I need to give thanks to markb01 for the pics he posted. I copied them and posted on the guys for sale thread. Thanks Mark!!

198plus · 01-03-2010, 11:35 PM

Thanks.........What site did you see it on ????

Quote:

Originally Posted by TimE

That is a cool intake setup. One of these intakes just popped up for sale on another site I frequent.

I need to give thanks to markb01 for the pics he posted. I copied them and posted on the guys for sale thread. Thanks Mark!!

70 Suburban · 01-04-2010, 07:11 PM

Sweet

TimE · 01-04-2010, 07:20 PM

Looks really nice!!

MacAttack · 01-04-2010, 08:11 PM

100 POINTS!

shortbed70 · 01-04-2010, 08:20 PM

That looks friggin awsome.

198plus · 01-04-2010, 11:16 PM

Oh good I won.......Just send the 100 to my pay pal

Thanks

Quote:

Originally Posted by MacAttack

100 CASH

MacAttack · 01-05-2010, 12:43 PM

Quote:

Originally Posted by 198plus

Oh good I won.......Just send the 100 to my pay pal

Thanks

Yeah - that's going to happen.

198plus · 01-04-2010, 11:20 PM

Thanks for the comments !!!!!!!!!!!!!

Quote:

Originally Posted by 70 Suburban

Sweet

Quote:

Originally Posted by TimE

Looks really nice!!

Quote:

Originally Posted by shortbed70

That looks friggin awsome.

jgh64pkup · 01-04-2010, 09:17 PM

awesome now send that proform my way

198plus · 01-04-2010, 11:17 PM

That Carb has a new home now, with my old engine

Quote:

Originally Posted by jgh64pkup

awesome now send that proform my way

ruffrida2005 · 01-04-2010, 11:37 PM

I like the way you changed the quote to CASH

12-29-2009, 07:00 PM	#2
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: 198Plus build If you could hop in the wayback machine and take a quick trip to 1968, you could pick up a brand new one for less than $100. I imagine they are a tad more now -

12-29-2009, 08:19 PM	#4
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 198Plus build i like the way the big block one looks the way the carbs are not side by side __________________ Gage 1967 C10 Shortbed Stepside

12-30-2009, 03:50 PM	#5
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 198Plus build what size carbs are those! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

12-30-2009, 10:09 PM	#7
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 198Plus build dont think it will too much carb for the small block __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

12-31-2009, 12:44 AM	#8
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 198Plus build Very cool. Now I want two carbs. It's only 900 cfm Ruff. In just switched from a 750 to a 650 on my 460. Much better. Did I say 460. ops. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 12-31-2009 at 12:47 AM.

12-31-2009, 12:49 AM	#9
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 198Plus build tunnel rams for a sbc use the same size carbs __________________ Gage 1967 C10 Shortbed Stepside

01-03-2010, 08:51 PM	#10
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: 198Plus build This makes me feel better about what I gave for my cross ram set up http://cgi.ebay.com/ebaymotors/Vinta...Q5fAccessories __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl

01-04-2010, 06:53 PM	#12
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: 198Plus build Got the intake and carbs finished today......Amazing what a little clean up will do...........Took it to Millers Powder Coating for a little blasting and put in the polishing tumbler. __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl Last edited by 198plus; 01-04-2010 at 11:33 PM.

01-03-2010, 08:55 PM	#13
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 198Plus build you got one heck of a deal __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 10:59 PM	#14
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: 198Plus build That is a cool intake setup. One of these intakes just popped up for sale on another site I frequent. I need to give thanks to markb01 for the pics he posted. I copied them and posted on the guys for sale thread. Thanks Mark!! __________________ Just hopin' I live long enough to finish something!!!

01-04-2010, 07:11 PM	#16
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: 198Plus build Sweet __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

01-04-2010, 07:20 PM	#17
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: 198Plus build Looks really nice!! __________________ Just hopin' I live long enough to finish something!!!

01-04-2010, 08:11 PM	#18
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: 198Plus build 100 POINTS! __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

01-04-2010, 08:20 PM	#19
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 198Plus build That looks friggin awsome. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-04-2010, 09:17 PM	#23
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 198Plus build awesome now send that proform my way __________________ Gage 1967 C10 Shortbed Stepside



Register or Log In To remove these advertisements.

01-04-2010, 11:37 PM	#25
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 198Plus build I like the way you changed the quote to CASH __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

Register or Log In To remove these advertisements.