dinos just a clean bagged 66 shortbed - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

G Man · 03-11-2013, 10:22 PM

Very clean i like it

FlammedC10 · 03-11-2013, 10:52 PM

Very nice quality build. I see you just mounted the front air bags directly to the lower a arm with no cup or anything. Does this only work with the firestone bags you are using?? I have a very very similar setup with a p/c crossmember and slam ss7 bags and i have always wondered if it would be ok if the bag touched the arm from being mounted directly to the arm?? Any insight would be appreciated.

6084chevys · 03-11-2013, 11:04 PM

Hey!!!! Dino ? I have a 60 apache how much do they go for all fixed up?
Seems like you would know about these style trucks I dig your trucks
I took a look at your pro street truck at brothers inspiration I say but yeah just asking. Like the blue!!!!
Posted via Mobile Device

Dinos63 · 03-12-2013, 12:59 AM

Quote:

Originally Posted by Modges'66

Dude, sic gage bezel, looks so clean!!!

thanks kat!

Quote:

Originally Posted by Delmo

Cleeeeeeeean
Posted via Mobile Device

why thank you master yodi!

Quote:

Originally Posted by Jmorales3181

Wow that looks super clean man! Joe needs a raise for sure lol

Posted via Mobile Device

joe is now been adopted into my family

Quote:

Originally Posted by shawno72

Nice and tidy, love it

thanks shawno

Quote:

Originally Posted by franky69c10

Lookin good Dino

Posted via Mobile Device

thanks kat

Quote:

Originally Posted by Realnoisy

Quote:

Originally Posted by chevyrestoguy

That gauge cluster looks cool. The radius around the edges was a nice touch, and if Joe did that on a bead roller, he's a maniac. That 'aint easy, especially in that small of a radius. One mistake, the panel is junk.

How come every time I see those seats, I hear mariachi music? They appear to have been done south of the border. My brother had a pair of bell-bottom pants in the early '70s with almost the same material. He was a stylish dude. The problem was, I was 4 years younger than him, and I got all of his hand-me-downs when they were waaay out of style.

yeah joe said the same thing about one mistake .... start all over... them seats are very disco

Quote:

Originally Posted by wutnxt

Dude....

As always killer work.....but ya know if you and joe want some time off.....I have a back load of work to do in my shop......and I saw sunshine and everything today.......lol....

You boy's got mad skills and are setting the bar higher with each and every build....nice work

randy

joe hates snow

Quote:

Originally Posted by flips72

see, i told ya....were pulling for ya joe

seriously looks awesome love the inset of the gauges.

Quote:

Originally Posted by rodstored-72

Originally Posted by Bomp
Totally dig on the cluster mod.
My daughter says those seat covers are totally "Disco"

thanks yeah there a bit loud

bit loud!!! ....... their screamin' "get down tonight" all the way down the frickin' road!!!!

... good job dino! did you make it out saturday?? didn't recognize anything....

Quote:

Originally Posted by hotcar

seats SATURDAY NIGHT FEVER. STAYING ALIVE................

I went friday for a bit it snowed and i left

and me and the wife went out of town for a lil get a way it was relaxing

Dinos63 · 03-12-2013, 01:12 AM

Quote:

Originally Posted by G Man

Very clean i like it

thanks g-man

Quote:

Originally Posted by FlammedC10

Very nice quality build. I see you just mounted the front air bags directly to the lower a arm with no cup or anything. Does this only work with the firestone bags you are using?? I have a very very similar setup with a p/c crossmember and slam ss7 bags and i have always wondered if it would be ok if the bag touched the arm from being mounted directly to the arm?? Any insight would be appreciated.

the front lca spring pocket has been welded up and redrilled for the bag.Using the firestone smaller bag works well it doesn't rub in the lca and it allows the bag to totally collapse which gets you lower,hope this makes sense

Quote:

Originally Posted by 6084chevys

Hey!!!! Dino ? I have a 60 apache how much do they go for all fixed up?
Seems like you would know about these style trucks I dig your trucks
I took a look at your pro street truck at brothers inspiration I say but yeah just asking. Like the blue!!!!
Posted via Mobile Device

thanks ! if tough to say but these 60-66 truck are really starting to pull the money

Dinos63 · 03-12-2013, 01:13 AM

Quote:

Originally Posted by hotcar

seats SATURDAY NIGHT FEVER. STAYING ALIVE................

Dinos63 · 03-12-2013, 01:21 AM

ok some up dates, front glass is in !and i have a buddy who will cut me all green glass for the rest of my truck doors , vents and rear. joe started fabing up the fenders and front end ,I like what we did on the core support on the dually and fan shroud to keep it extra clean

Delmo · 03-12-2013, 01:35 AM

Ohhhhh yaaaaa.

likaroc13 · 03-12-2013, 01:36 AM

looking great Dino! that's a nice touch on the core support...what's the consensus on the new front fender fitment?

chakah · 03-12-2013, 07:58 AM

...well thanks alot bro, who's gonna clean up all this drool?

Low Elco · 03-12-2013, 08:14 AM

That was my question- Are those repop fenders, and how do they fit?

Low Elco · 03-12-2013, 08:16 AM

Ps- love the cluster. Truck's coming together great!

erock805 · 03-12-2013, 10:04 AM

man o man is that thing nice!

**clemdaddy** · 03-12-2013, 02:47 PM

i wish that i could build this purdy of a truck. oh well, time to step up and get'er dun.
magnificent truck developing before my eyes. you guys are the best...

Bigru · 03-12-2013, 04:30 PM

Nice build!! Dino I'm looking for a nice original 60-66 fleetside maybe you can head me in the right direction and btw do you have a part # for your air valve switches?

Gus350 · 03-12-2013, 04:50 PM

What gauge metal is that you are using on the radiater support. Thanks

jlsanborn · 03-12-2013, 06:32 PM

Moving fast and nice work! Very cool....

Rusty Wrenches · 03-12-2013, 10:19 PM

Quote:

Originally Posted by Bigru

Nice build!! Dino I'm looking for a nice original 60-66 fleetside maybe you can head me in the right direction and btw do you have a part # for your air valve switches?

He uses Dloe65's valves, search his truck on this site and he's got a link to order his valves.

Dinos63 · 03-13-2013, 01:01 AM

ALWAYS THANKS DUUDES!! I like this new fenders they fit great ,i would use them again for sure , joe is a pretty picky duude and he also like them . lil update joe got the drivers fender cut and the round rod welding in looks great, and got after some bead rolling on the core filler panel

Bomp · 03-13-2013, 02:46 AM

Sick action with the roller

Bar goes up even higher again
Posted via Mobile Device

DLOE65 · 03-13-2013, 03:02 AM

dude!! lookin awesome!! what caps you plannin on running?

shawno72 · 03-13-2013, 07:18 AM

Hey Dino what kind of mods did you make to that air cleaner base?

Bigru · 03-13-2013, 10:45 AM

Quote:

Originally Posted by Rusty Wrenches

He uses Dloe65's valves, search his truck on this site and he's got a link to order his valves.

Thanks Rusty Wrenches!!

chevyrestoguy · 03-13-2013, 11:35 AM

The raised bead on the inner panels is a nice touch, and it adds a bunch of strength to the panel. Are you planning to spray them chassis black, or another color?

You know you're hosed now, right? Once you put one custom panel like that under the hood, you are now committed to having to do the entire engine compartment (including the under-side of the hood). Kinda like steel braided hose.....if you put one piece in, you have to do 'em all the same.

**67cheby** · 03-13-2013, 11:40 AM

Looking TOP NOTCH as ALWAYS !

03-11-2013, 10:22 PM	#526
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: dinos just a clean bagged 66 shortbed Very clean i like it

03-11-2013, 10:52 PM	#527
FlammedC10 Registered User Join Date: Sep 2011 Location: Clarksville, TN Posts: 21	Re: dinos just a clean bagged 66 shortbed Very nice quality build. I see you just mounted the front air bags directly to the lower a arm with no cup or anything. Does this only work with the firestone bags you are using?? I have a very very similar setup with a p/c crossmember and slam ss7 bags and i have always wondered if it would be ok if the bag touched the arm from being mounted directly to the arm?? Any insight would be appreciated.

03-11-2013, 11:04 PM	#528
6084chevys Registered User Join Date: Nov 2010 Location: san fernando,ca Posts: 29	Re: dinos just a clean bagged 66 shortbed Hey!!!! Dino ? I have a 60 apache how much do they go for all fixed up? Seems like you would know about these style trucks I dig your trucks I took a look at your pro street truck at brothers inspiration I say but yeah just asking. Like the blue!!!! Posted via Mobile Device

03-12-2013, 01:21 AM	#532
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: dinos just a clean bagged 66 shortbed ok some up dates, front glass is in !and i have a buddy who will cut me all green glass for the rest of my truck doors , vents and rear. joe started fabing up the fenders and front end ,I like what we did on the core support on the dually and fan shroud to keep it extra clean Attached Images __________________ CHEVY ONLY... Nothin Else !

03-12-2013, 01:35 AM	#533
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: dinos just a clean bagged 66 shortbed Ohhhhh yaaaaa.

03-12-2013, 01:36 AM	#534
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: dinos just a clean bagged 66 shortbed looking great Dino! that's a nice touch on the core support...what's the consensus on the new front fender fitment? __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

03-12-2013, 07:58 AM	#535
chakah Registered User Join Date: Jun 2012 Location: El Paso, Tx. Posts: 283	Re: dinos just a clean bagged 66 shortbed ...well thanks alot bro, who's gonna clean up all this drool? __________________ "El Jerry" '03 3500 Duramax dually '96 1500 ext. cab Chevy '66 swb C-10 '63 Panel '60 VW vert '56 VW vert

03-12-2013, 08:14 AM	#536
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: dinos just a clean bagged 66 shortbed That was my question- Are those repop fenders, and how do they fit? __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

03-12-2013, 08:16 AM	#537
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: dinos just a clean bagged 66 shortbed Ps- love the cluster. Truck's coming together great! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

03-12-2013, 10:04 AM	#538
erock805 Registered User Join Date: Apr 2007 Location: gilbert, az Posts: 392	Re: dinos just a clean bagged 66 shortbed man o man is that thing nice! __________________ "Do what you want to the girl, but leave me alone!"

03-12-2013, 02:47 PM	#539
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: dinos just a clean bagged 66 shortbed i wish that i could build this purdy of a truck. oh well, time to step up and get'er dun. magnificent truck developing before my eyes. you guys are the best...

03-12-2013, 04:30 PM	#540
Bigru Registered User Join Date: Mar 2013 Location: Missouri City, Tx Posts: 321	Re: dinos just a clean bagged 66 shortbed Nice build!! Dino I'm looking for a nice original 60-66 fleetside maybe you can head me in the right direction and btw do you have a part # for your air valve switches?

03-12-2013, 04:50 PM	#541
Gus350 68 C 10 Join Date: Aug 2010 Location: Advance ,Mo Posts: 554	Re: dinos just a clean bagged 66 shortbed What gauge metal is that you are using on the radiater support. Thanks __________________ Kevin "Life is Hard But its Harder when your Stupid" John Wayne 68 C10 70 C20 http://67-72chevytrucks.com/vboard/s....php?t=602326#

03-12-2013, 06:32 PM	#542
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: dinos just a clean bagged 66 shortbed Moving fast and nice work! Very cool.... __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

03-13-2013, 01:01 AM	#544
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: dinos just a clean bagged 66 shortbed ALWAYS THANKS DUUDES!! I like this new fenders they fit great ,i would use them again for sure , joe is a pretty picky duude and he also like them . lil update joe got the drivers fender cut and the round rod welding in looks great, and got after some bead rolling on the core filler panel Attached Images __________________ CHEVY ONLY... Nothin Else !



Register or Log In To remove these advertisements.

03-13-2013, 02:46 AM	#545
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: dinos just a clean bagged 66 shortbed Sick action with the roller Bar goes up even higher again Posted via Mobile Device

03-13-2013, 03:02 AM	#546
DLOE65 Registered User Join Date: Nov 2009 Location: Orange, CA Posts: 525	Re: dinos just a clean bagged 66 shortbed dude!! lookin awesome!! what caps you plannin on running?

03-13-2013, 07:18 AM	#547
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: dinos just a clean bagged 66 shortbed Hey Dino what kind of mods did you make to that air cleaner base? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-13-2013, 11:35 AM	#549
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: dinos just a clean bagged 66 shortbed The raised bead on the inner panels is a nice touch, and it adds a bunch of strength to the panel. Are you planning to spray them chassis black, or another color? You know you're hosed now, right? Once you put one custom panel like that under the hood, you are now committed to having to do the entire engine compartment (including the under-side of the hood). Kinda like steel braided hose.....if you put one piece in, you have to do 'em all the same. __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527

03-13-2013, 11:40 AM	#550
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: dinos just a clean bagged 66 shortbed Looking TOP NOTCH as ALWAYS ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.