What did you do to your truck today! - Page 220 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 12-08-2012, 12:19 PM

Looks great Aussie!!!!

shawno72 · 12-08-2012, 12:20 PM

Mine started then died the other moring, the carb was literally dumping gas into the intake. Anyone got a good used fuel pressure regulator they want to sell cheap??

magwakeenercew2jh · 12-08-2012, 12:26 PM

I've got an Edlebrock (I think 650) carb you can have. Choke's wired up for that no-choke effect. It's yours for the asking, S.

Not sure that would solve your too much fuel pressure issue, tho, Bro

shawno72 · 12-08-2012, 01:02 PM

Quote:

Originally Posted by magwakeenercew2jh

I've got an Edlebrock (I think 650) carb you can have. Choke's wired up for that no-choke effect. It's yours for the asking, S.

Not sure that would solve your too much fuel pressure issue, tho, Bro

I'll take it, thank you!!

magwakeenercew2jh · 12-08-2012, 01:13 PM

Quote:

Originally Posted by shawno72

I'll take it, thank you!!

Great. It's yours. I have a drive today...To Moss Landing. Maybe we can meet half way some day this week...like Merced...
and I'll hand it over.

If that doesen't work (your truck seems to be not running).....Let me know. I can send it, too.

Let me know your schedule. We'll get it to you. Maybe someone's making a run from the Fresno area to the Stockton area?

shawno72 · 12-08-2012, 01:40 PM

Quote:

Originally Posted by magwakeenercew2jh

Great. It's yours. I have a drive today...To Moss Landing. Maybe we can meet half way some day this week...like Merced...
and I'll hand it over.

If that doesen't work (your truck seems to be not running).....Let me know. I can send it, too.

Let me know your schedule. We'll get it to you. Maybe someone's making a run from the Fresno area to the Stockton area?

I will be pretty busy til Christmas so I'll have to see when I can make it down that way. May be easier if you could send it, let me know.

ryanroo · 12-08-2012, 02:42 PM

Quote:

Originally Posted by shawno72

Mine started then died the other moring, the carb was literally dumping gas into the intake. Anyone got a good used fuel pressure regulator they want to sell cheap??

i'm pretty sure i have a LP regulator out in the garage. ill check.

ryan

jc70chevy · 12-08-2012, 02:48 PM

Quote:

Originally Posted by shawno72

Got any pics of your truck?

yes i f pics but cant seem to figure out how to post on here....

ryanroo · 12-08-2012, 02:53 PM

i have this, found it right next to a big aeromotive canister type fuel filter that i forgot why i had. then i remembered it was to flipping shiny for my jeep.

this one say max inlet PSI 20 and adjustable from 5-12 PSI. the box is dirty as hell, but its new. i've no idea why i have this one.

also, with a carb, you can run an inline filer from a 75ish jeep wagoneer. they are dirt cheap and just like any other inline fuel filter w/3/8' inlets, except on the outlet(i think) side there is a 1/4" fitting that is used as a return. it lets excess pressure bleed off when the float closes the needle so it wont over pressure. ive used them several times in place of regulators on engines that dont have super zesty pumps with mucho success

Ryan

magwakeenercew2jh · 12-08-2012, 03:12 PM

Quote:

Originally Posted by shawno72

I will be pretty busy til Christmas so I'll have to see when I can make it down that way. May be easier if you could send it, let me know.

No problem. I'll box it up and send it Monday or Tuesday.
Posted via Mobile Device

shawno72 · 12-08-2012, 03:19 PM

Quote:

Originally Posted by ryanroo

i have this, found it right next to a big aeromotive canister type fuel filter that i forgot why i had. then i remembered it was to flipping shiny for my jeep.

this one say max inlet PSI 20 and adjustable from 5-12 PSI. the box is dirty as hell, but its new. i've no idea why i have this one.

also, with a carb, you can run an inline filer from a 75ish jeep wagoneer. they are dirt cheap and just like any other inline fuel filter w/3/8' inlets, except on the outlet(i think) side there is a 1/4" fitting that is used as a return. it lets excess pressure bleed off when the float closes the needle so it wont over pressure. ive used them several times in place of regulators on engines that dont have super zesty pumps with mucho success

Ryan

So this is a fuel pressure regulator? I'm willing to try it, how much you want for it?

Quote:

Originally Posted by magwakeenercew2jh

No problem. I'll box it up and send it Monday or Tuesday.
Posted via Mobile Device

Thank you M17, have a Merry Christmas!!

ryanroo · 12-08-2012, 03:47 PM

It is.

here is a summit link. apparently its an older model.

PM me your address. ill stick it in the mail if you want it

Ryan

shawno72 · 12-08-2012, 04:03 PM

Quote:

Originally Posted by ryanroo

It is.

here is a summit link. apparently its an older model.

PM me your address. ill stick it in the mail if you want it

Ryan

I'll take it, thank you Ryan. Pm sent.

Shyguy · 12-08-2012, 04:40 PM

Painted the stepside tail-light brackets. Taking small steps for now getting ready for Christmas and the colder weather. Also spending a lot of time trying to finish the sewing/craft room, figured it would be better to get it done during the colder weather so I can have more time during the nice weather to work on outside projects.

Aaron Burkemper · 12-08-2012, 04:49 PM

Finished installing a Detroit locker in my C20. I had to take it out in the muddy pasture to test it. I think I will be an HO52 fan for life now. It did better than my 05 F350's "limitless" slip rear. I also replaced the fuses for my amp meter. It works even with the voltage regulator eliminator used with the 10 SI alternator. Granted it isn't the most useful gauge, but I like the fact that it works. Both would have been much more difficult without this site!

mygmctruck · 12-08-2012, 04:55 PM

Well today I polished all the head lamp bezels and the wiper arms. Both were very bad after 20 yrs of sitting and waiting for me.
I also took both the shifter boots and cleaned them up and sprayed them with black dye , they look like new.

Put a bunch of nuts , bolts and misc stuff in the vibrator /polisher for rust removal and future plating or painting.

67Slider · 12-08-2012, 05:29 PM

Nothing on the truck it's in paint jail for the winter but wired up a used emergency flasher switch and courtesy lights in my wife's 66 mustang. Got a sweet deal on them on ebay. $30 bucks shipped. Woo Hoo. Still does not compare to tinkering on the truck tho.

sharpmark · 12-08-2012, 05:38 PM

have had a vibration in the gearbox for awhile that went away when driving or when foot on the clutch.one of those "i get around to having alook oneday as its not really a problem things".
yesterday was when i finally got around too it and bloody lucky i did!!!
the 4 gearbox to bellhousing bolts were all loose with 2 only held in by 2 threads.that would have seriously ruined my day if the gearbox came off while driving!!!
memo to self--"check all little problems sooner,rather then when they become big problems later"

shawno72 · 12-08-2012, 06:06 PM

Quote:

Originally Posted by sharpmark

have had a vibration in the gearbox for awhile that went away when driving or when foot on the clutch.one of those "i get around to having alook oneday as its not really a problem things".
yesterday was when i finally got around too it and bloody lucky i did!!!
the 4 gearbox to bellhousing bolts were all loose with 2 only held in by 2 threads.that would have seriously ruined my day if the gearbox came off while driving!!!
memo to self--"check all little problems sooner,rather then when they become big problems later"

That's being sharp Mark.

srob67 · 12-08-2012, 07:24 PM

Grille, lights, Smoothie bumber, wired up the lights.

hpcgmc · 12-08-2012, 07:41 PM

Took my truck to get a Christmas tree.

Andy4639 · 12-08-2012, 08:35 PM

Drove the truck over to Greenville SC for our local truck meeting at Twin Peaks.

71K20chevy · 12-08-2012, 08:36 PM

Got my defrost hose back on the vent! No wonder it didn't defrost this morning!

ole dollor · 12-08-2012, 09:12 PM

did not do anything to ole dollor , but the wife's Dodge Durango blew an right exhaust manifold gasket...because the back bolts broke...i have heard that the 4.7 motor will do this and hers did.just a little over 150 K miles and i finally had to put a wrench on the motor, what is this world coming to.

BarryB · 12-09-2012, 12:26 AM

Finally started working on it, got the old roof skin removed(PO installed sunroof) and the replacement trimmed to fit. Sorry no pics, but on to the de burring and welding it in place.

12-08-2012, 12:19 PM	#5476
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: What did you do to your truck today! Looks great Aussie!!!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-08-2012, 12:20 PM	#5477
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: What did you do to your truck today! Mine started then died the other moring, the carb was literally dumping gas into the intake. Anyone got a good used fuel pressure regulator they want to sell cheap?? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-08-2012, 12:26 PM	#5478
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today! I've got an Edlebrock (I think 650) carb you can have. Choke's wired up for that no-choke effect. It's yours for the asking, S. Not sure that would solve your too much fuel pressure issue, tho, Bro Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

12-08-2012, 02:53 PM	#5484
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: What did you do to your truck today! i have this, found it right next to a big aeromotive canister type fuel filter that i forgot why i had. then i remembered it was to flipping shiny for my jeep. this one say max inlet PSI 20 and adjustable from 5-12 PSI. the box is dirty as hell, but its new. i've no idea why i have this one. also, with a carb, you can run an inline filer from a 75ish jeep wagoneer. they are dirt cheap and just like any other inline fuel filter w/3/8' inlets, except on the outlet(i think) side there is a 1/4" fitting that is used as a return. it lets excess pressure bleed off when the float closes the needle so it wont over pressure. ive used them several times in place of regulators on engines that dont have super zesty pumps with mucho success Ryan Attached Images __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions Last edited by ryanroo; 12-08-2012 at 02:55 PM. Reason: forgot pic

12-08-2012, 03:47 PM	#5487
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: What did you do to your truck today! It is. here is a summit link. apparently its an older model. PM me your address. ill stick it in the mail if you want it Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

12-08-2012, 04:40 PM	#5489
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: What did you do to your truck today! Painted the stepside tail-light brackets. Taking small steps for now getting ready for Christmas and the colder weather. Also spending a lot of time trying to finish the sewing/craft room, figured it would be better to get it done during the colder weather so I can have more time during the nice weather to work on outside projects. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

12-08-2012, 04:49 PM	#5490
Aaron Burkemper Registered User Join Date: Sep 2011 Location: New Melle, MO Posts: 104	Re: What did you do to your truck today! Finished installing a Detroit locker in my C20. I had to take it out in the muddy pasture to test it. I think I will be an HO52 fan for life now. It did better than my 05 F350's "limitless" slip rear. I also replaced the fuses for my amp meter. It works even with the voltage regulator eliminator used with the 10 SI alternator. Granted it isn't the most useful gauge, but I like the fact that it works. Both would have been much more difficult without this site! __________________ 1971 C20 "Shreck" 1980 C30 dump bed "Ratchett"

12-08-2012, 04:55 PM	#5491
mygmctruck Registered User Join Date: Sep 2011 Location: Munising , mi Posts: 144	Re: What did you do to your truck today! Well today I polished all the head lamp bezels and the wiper arms. Both were very bad after 20 yrs of sitting and waiting for me. I also took both the shifter boots and cleaned them up and sprayed them with black dye , they look like new. Put a bunch of nuts , bolts and misc stuff in the vibrator /polisher for rust removal and future plating or painting.

12-08-2012, 05:29 PM	#5492
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: What did you do to your truck today! Nothing on the truck it's in paint jail for the winter but wired up a used emergency flasher switch and courtesy lights in my wife's 66 mustang. Got a sweet deal on them on ebay. $30 bucks shipped. Woo Hoo. Still does not compare to tinkering on the truck tho. __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

12-08-2012, 05:38 PM	#5493
sharpmark Registered User Join Date: Mar 2009 Location: rotorua/new zealand Posts: 161	Re: What did you do to your truck today! have had a vibration in the gearbox for awhile that went away when driving or when foot on the clutch.one of those "i get around to having alook oneday as its not really a problem things". yesterday was when i finally got around too it and bloody lucky i did!!! the 4 gearbox to bellhousing bolts were all loose with 2 only held in by 2 threads.that would have seriously ruined my day if the gearbox came off while driving!!! memo to self--"check all little problems sooner,rather then when they become big problems later" __________________ 1969 stepside-305/4spd/12 bolt posi http://67-72chevytrucks.com/vboard/s...d.php?t=477157 1968 pontiac lemans convertible-350/pwrglde/10 bolt 1934 oldsmobile sedan-350/350/12 bolt posi 1930 model a pickup-350/350/jag ind 1928 model a roadster-283/350/9"

12-08-2012, 07:24 PM	#5495
srob67 Registered User Join Date: Jun 2009 Location: KY Posts: 99	Re: What did you do to your truck today! Grille, lights, Smoothie bumber, wired up the lights. Attached Images

12-08-2012, 07:41 PM	#5496
hpcgmc Registered User Join Date: Oct 2012 Location: Northern Cal Posts: 249	Re: What did you do to your truck today! Took my truck to get a Christmas tree. Attached Images __________________ 1967 GMC 1500 SWB. Driving this truck since I was 14.

12-08-2012, 08:35 PM	#5497
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: What did you do to your truck today! Drove the truck over to Greenville SC for our local truck meeting at Twin Peaks. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-08-2012, 08:36 PM	#5498
71K20chevy Registered User Join Date: Jul 2012 Location: Ft Wayne Indiana Posts: 1,204	Re: What did you do to your truck today! Got my defrost hose back on the vent! No wonder it didn't defrost this morning! __________________ 71 K20 64 GMC mud truck

12-08-2012, 09:12 PM	#5499
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: What did you do to your truck today! did not do anything to ole dollor , but the wife's Dodge Durango blew an right exhaust manifold gasket...because the back bolts broke...i have heard that the 4.7 motor will do this and hers did.just a little over 150 K miles and i finally had to put a wrench on the motor, what is this world coming to.



Register or Log In To remove these advertisements.

12-09-2012, 12:26 AM	#5500
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: What did you do to your truck today! Finally started working on it, got the old roof skin removed(PO installed sunroof) and the replacement trimmed to fit. Sorry no pics, but on to the de burring and welding it in place. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

Register or Log In To remove these advertisements.