67 cheby's Dropmember build thread (CLOUD 9) - Page 221 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

custompaint870 · 08-21-2012, 07:13 PM

awesome! congrats on the award

tantrumpipeline · 08-21-2012, 08:30 PM

Sponsors like crazy!! Well deserved, and get off the computer and get after it haha

**Dieselwrencher** · 08-22-2012, 02:58 AM

Congrats on the trophies and sales Mike!

**67cheby** · 08-22-2012, 12:55 PM

Quote:

Originally Posted by custompaint870

awesome! congrats on the award

thanks man !

Quote:

Originally Posted by oldman3

Hey Mike, you don't have two months to get all that work done. I think somewhere in these pages you said something about being "done" by page 250. That only leaves you 7 pages, heck you burn up 2 pages a day.

Just kidding, truck looks great and I don't blame you a bit for wanting to stare at it all day.

Hope everything goes together smooth...Jim

LOL....oops !

Quote:

Originally Posted by widewhite70

i think that is a metallic color ? If it is the color i think it is , it will be a great color and not to much like mine ! but it was one of the colors i was looking at !

ok cool! I've always liked those shades of color[/QUOTE]
me too !

Quote:

Originally Posted by LEEVON

I took a buddy for a ride in my truck once, we were getting Chinese food and in the line I was explaining the "I had one of those" phenomenon...right as I finish a lady comes up to me and gives the whole story, ver-batim as if she was listening but she didn't have a clue. He was laughing so hard I had to excuse him. It was awesome.

LOL, yep !

Quote:

Originally Posted by tantrumpipeline

Sponsors like crazy!! Well deserved, and get off the computer and get after it haha

thanks man....i got some stuff to start on tonight !

Quote:

Originally Posted by Dieselwrencher

Congrats on the trophies and sales Mike!

thanks man !

**67cheby** · 08-22-2012, 12:59 PM

Who LOVES PAINLESS PERFORMANCE......THIS GUY !! Check out my new parts, 18 circuit wiring harness, under dash light, brake light switch, and an altenator that pushes 70 amps at 700rpm and 118 amps at highway speeds !!

El Campo · 08-22-2012, 01:05 PM

I have that very same harness in my truck and I also love it! It is very easy to use. Solder your connections on it and you will never have to look at the harness again. Im planning on totally removing the circuits that I will never use (including the plugs in the fuse box) so that I can replace them if I need them in the future. I dislike having loose wires hanging around and seems like a fire hazard to me. I got the AC harness also as I am going to be running factory air but I need the courtesy lights yet. Where are you planning on putting them, under the dash? Oh and one other thing, I know this sounds ridiculous but if you cut off the ends of the wiring (and only if you are planning on throwing them away instead of keeping them yourself) could I buy it from you possibly? The reason I say is because I cut some wires (I think, I need to check) that I threw away and now I need some and cannot find any wiring to match it. If you are planning on keeping it laying around though don't mind me haha

**67cheby** · 08-22-2012, 01:08 PM

Sweet, it looks like a very easy install, and yes i will run the light somewhere under the dash i guess one on each side !

raull · 08-22-2012, 01:35 PM

me too, thats what i used on my car and already have the 18c, lamps and other goodies from them for the truck , also theyre braided wire loom its awesome , pricey but awesome

Dinos63 · 08-22-2012, 02:26 PM

another nice score!!

**oldman3** · 08-22-2012, 06:04 PM

Nice stuff...Jim

**67cheby** · 08-22-2012, 06:36 PM

Quote:

Originally Posted by raull

me too, thats what i used on my car and already have the 18c, lamps and other goodies from them for the truck , also theyre braided wire loom its awesome , pricey but awesome

braided loom and fuel injection wiring are coming !

Quote:

Originally Posted by Dinos63

another nice score!!

Thanks !

Quote:

Originally Posted by oldman3

Nice stuff...Jim

Thanks ! cant wait to start running it !

custompaint870 · 08-22-2012, 08:05 PM

Did you get the 60101 painless tbi kit?

**67cheby** · 08-22-2012, 08:10 PM

Quote:

Originally Posted by custompaint870

Did you get the 60101 painless tbi kit?

i believe that is the one headed my way !

custompaint870 · 08-22-2012, 08:11 PM

Right on, thats a great kit! i bought it a while back for mine!

6772owner · 08-22-2012, 08:21 PM

That is some sweet stuff buddy, cant wait to see it completed!

jtp67-72 · 08-22-2012, 08:44 PM

nice....does courtesy light come with door pins too or just off lite switch??

**67cheby** · 08-22-2012, 09:10 PM

It has the door pins
Posted via Mobile Device

tantrumpipeline · 08-23-2012, 05:58 PM

no updates yet today...........Mike's actually working on cloud 9 maybe?

**67cheby** · 08-23-2012, 06:18 PM

LOL, nope at work but in about 45 mins.....i start installing my wiring !! from PAINLESS wiring !!LOL , WIRING is one of my least favorite things so lets hope this goes as PAINLESS as possible !!

XxCHEVYMANxX · 08-23-2012, 08:23 PM

No pun intended right ?

big_al_71 · 08-23-2012, 09:52 PM

Mike i installed the same lights on my truck painless parts are outstanding quality

widewhite70 · 08-24-2012, 10:18 AM

Congrats on the PAINLESS score! thats awesome!

**superflysteiny** · 08-24-2012, 10:32 AM

We're are the pictures are you slacking
Posted via Mobile Device

**67cheby** · 08-24-2012, 10:41 AM

Thanks guys !! Here is the start of a whole lot of wiring !!! PAINLESS WIRING !!

Slick67 · 08-24-2012, 11:01 AM

Not my favorite thing to do, but it is already looking clean!!!

08-21-2012, 07:13 PM	#1
custompaint870 Registered User Join Date: Apr 2011 Location: De Queen, AR Posts: 56	Re: 67 cheby's Dropmember build thread (CLOUD 9) awesome! congrats on the award __________________ Check out my 72 build http://67-72chevytrucks.com/vboard/s...d.php?t=523099

08-21-2012, 08:30 PM	#2
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: 67 cheby's Dropmember build thread (CLOUD 9) Sponsors like crazy!! Well deserved, and get off the computer and get after it haha __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

08-22-2012, 02:58 AM	#3
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 67 cheby's Dropmember build thread (CLOUD 9) Congrats on the trophies and sales Mike! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-22-2012, 12:59 PM	#5
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Who LOVES PAINLESS PERFORMANCE......THIS GUY !! Check out my new parts, 18 circuit wiring harness, under dash light, brake light switch, and an altenator that pushes 70 amps at 700rpm and 118 amps at highway speeds !! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-22-2012, 01:05 PM	#6
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: 67 cheby's Dropmember build thread (CLOUD 9) I have that very same harness in my truck and I also love it! It is very easy to use. Solder your connections on it and you will never have to look at the harness again. Im planning on totally removing the circuits that I will never use (including the plugs in the fuse box) so that I can replace them if I need them in the future. I dislike having loose wires hanging around and seems like a fire hazard to me. I got the AC harness also as I am going to be running factory air but I need the courtesy lights yet. Where are you planning on putting them, under the dash? Oh and one other thing, I know this sounds ridiculous but if you cut off the ends of the wiring (and only if you are planning on throwing them away instead of keeping them yourself) could I buy it from you possibly? The reason I say is because I cut some wires (I think, I need to check) that I threw away and now I need some and cannot find any wiring to match it. If you are planning on keeping it laying around though don't mind me haha __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!

08-22-2012, 01:08 PM	#7
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Sweet, it looks like a very easy install, and yes i will run the light somewhere under the dash i guess one on each side ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-22-2012, 01:35 PM	#8
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 67 cheby's Dropmember build thread (CLOUD 9) me too, thats what i used on my car and already have the 18c, lamps and other goodies from them for the truck , also theyre braided wire loom its awesome , pricey but awesome __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

08-22-2012, 02:26 PM	#9
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 67 cheby's Dropmember build thread (CLOUD 9) another nice score!! __________________ CHEVY ONLY... Nothin Else !

08-22-2012, 06:04 PM	#10
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: 67 cheby's Dropmember build thread (CLOUD 9) Nice stuff...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

08-22-2012, 08:05 PM	#12
custompaint870 Registered User Join Date: Apr 2011 Location: De Queen, AR Posts: 56	Re: 67 cheby's Dropmember build thread (CLOUD 9) Did you get the 60101 painless tbi kit? __________________ Check out my 72 build http://67-72chevytrucks.com/vboard/s...d.php?t=523099

08-22-2012, 08:11 PM	#14
custompaint870 Registered User Join Date: Apr 2011 Location: De Queen, AR Posts: 56	Re: 67 cheby's Dropmember build thread (CLOUD 9) Right on, thats a great kit! i bought it a while back for mine! __________________ Check out my 72 build http://67-72chevytrucks.com/vboard/s...d.php?t=523099

08-22-2012, 08:21 PM	#15
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: 67 cheby's Dropmember build thread (CLOUD 9) That is some sweet stuff buddy, cant wait to see it completed! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

08-22-2012, 08:44 PM	#16
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: 67 cheby's Dropmember build thread (CLOUD 9) nice....does courtesy light come with door pins too or just off lite switch?? __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

08-22-2012, 09:10 PM	#17
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) It has the door pins Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-23-2012, 05:58 PM	#18
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: 67 cheby's Dropmember build thread (CLOUD 9) no updates yet today...........Mike's actually working on cloud 9 maybe? __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project



Register or Log In To remove these advertisements.

08-23-2012, 06:18 PM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) LOL, nope at work but in about 45 mins.....i start installing my wiring !! from PAINLESS wiring !!LOL , WIRING is one of my least favorite things so lets hope this goes as PAINLESS as possible !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-23-2012, 08:23 PM	#20
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 67 cheby's Dropmember build thread (CLOUD 9) No pun intended right ? __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

08-23-2012, 09:52 PM	#21
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 67 cheby's Dropmember build thread (CLOUD 9) Mike i installed the same lights on my truck painless parts are outstanding quality Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-24-2012, 10:18 AM	#22
widewhite70 Registered User Join Date: Apr 2010 Location: Coshocton,Ohio Posts: 834	Re: 67 cheby's Dropmember build thread (CLOUD 9) Congrats on the PAINLESS score! thats awesome! __________________ -Calvin http://67-72chevytrucks.com/vboard/s...d.php?t=512270 my build, tube chassis and LS2 How I keep the truck shining, Detail thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697902

08-24-2012, 10:32 AM	#23
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 67 cheby's Dropmember build thread (CLOUD 9) We're are the pictures are you slacking Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

08-24-2012, 10:41 AM	#24
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Thanks guys !! Here is the start of a whole lot of wiring !!! PAINLESS WIRING !! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-24-2012, 11:01 AM	#25
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 67 cheby's Dropmember build thread (CLOUD 9) Not my favorite thing to do, but it is already looking clean!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

Register or Log In To remove these advertisements.