What did you do to your truck today! - Page 221 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Square_78 · 02-19-2013, 02:49 AM

Quote:

Originally Posted by bigike55

put my new door panels on. I have to say I had to trim the holes out bigger where the armrest goes on. I ordered lmc door panels don't know if any others line up better but you cant see where I had to make the hole bigger the armrest covers it so I guess its ok.

Mine just barely lined up. The hole would be the right size if they put them in the right spot. Mine were the black metal panels from LMC.
Posted via Mobile Device

Square_78 · 02-19-2013, 02:50 AM

Been collecting parts... STILL waiting for my air bags and CPP brakes to arrive. Brutal. Got my GMC emblems installed, and got all the side trim cleaned up and repainted. I might install it this week. I bought all my 4 guage battery cable for the compressors, 80amp fuse block, continuous duty soliniod to control the compressor power. I made up some cables tonight with the 4 guage and copper ring terminals from the battery to the fuse and made a new 4 guage ground strap to go from the battery to ground. Just been slowly plugging away at it.
Posted via Mobile Device

aventur1 · 02-19-2013, 08:14 AM

Mister-B
What type of paint did you use?

BugzC10 · 02-19-2013, 08:30 AM

Pulled the upper steering column apart to determine why shifter is sloppy. Didn't find anything obviously wrong with it other than needed a good cleaning and lubrication. Now I can pull the shifter inward, but it still moves from park to drive without any stops. Now to dismantle, inspect and lubricate the lower section and linkage.

Posted via Mobile Device

*Mister-B* · 02-19-2013, 10:06 AM

Quote:

Originally Posted by aventur1

Mister-B
What type of paint did you use?

Posted via Mobile Device

aventur1 · 02-19-2013, 11:10 AM

Thanks...just looking to do mine and wanted some ideas..yours looks great

*Mister-B* · 02-19-2013, 11:19 AM

Quote:

Originally Posted by aventur1

Thanks...just looking to do mine and wanted some ideas..yours looks great

No problem. Check out my thread from yesterday for instructions
Posted via Mobile Device

Dale_Brown · 02-19-2013, 01:32 PM

Put on my new old 1971 Maryland State tags. Thanks Maryland.

Expat_dude · 02-19-2013, 08:18 PM

Tires came in today !

Posted via Mobile Device

GoaterAz · 02-19-2013, 09:47 PM

Quote:

Originally Posted by Expat_dude

Tires came in today !

Posted via Mobile Device

18" or 20"?

What are they going around?

magwakeenercew2jh · 02-19-2013, 10:44 PM

Didn't get much done today.

Or tonight.

mud.man.rj · 02-19-2013, 10:49 PM

Did nothing on my truck today, but ordered a Comp cam 270H for my 454 to go with the Rpm intake and roller rockers I just got. Might as well go all out when it is apart and port the 781 cyl heads too while I am in there, work and more work. Ported 1 of a set of Dart Iron Eagle New cyl. heads today and reassembled, one more to go.

bonnieclyde100 · 02-19-2013, 11:28 PM

i finally got my engine back from the machine shop . i put it together and painted it. it is a 1993 chevy 5.7. my original engine had a cracked block in two spots.

68 Longbed Dan · 02-20-2013, 12:29 AM

I put a tarp on mine, lol. We got alot of rain today right after I got off work. It's still going.

Trsmotrhed · 02-20-2013, 01:02 AM

Quote:

Originally Posted by 68 Longbed Dan

I put a tarp on mine, lol. We got alot of rain today right after I got off work. It's still going.

I'm out in Cali for work and was looking forward to some nice weather that's been going on lately. Nope, got wet and cold today in the bay area. Back in Roseville now. Still cold.
Posted via Mobile Device

68 Longbed Dan · 02-20-2013, 01:18 AM

Quote:

Originally Posted by Trsmotrhed

I'm out in Cali for work and was looking forward to some nice weather that's been going on lately. Nope, got wet and cold today in the bay area. Back in Roseville now. Still cold.
Posted via Mobile Device

Yea yesterday it was 80 and sunny, currently it's 43 and raining lol what gives! They are talking snow tomorrow in the hills outside where I work in Taft, gonna be fun. Gotta love California weather though

Posted via Mobile Device

magwakeenercew2jh · 02-20-2013, 07:42 PM

Quote:

Originally Posted by 68 longbed dan

yea yesterday it was 80 and sunny, currently it's 43 and raining lol what gives! They are talking snow tomorrow in the hills outside where i work in taft, gonna be fun. Gotta love california weather though

x2

jonny..2008 · 02-20-2013, 01:32 AM

all cool stuff you guys are doing.

all i did was replace the rear wheel cylinders.
and made this stop motion video of part of the job.

http://youtu.be/raGxEDB-lPc

VWNate1 · 02-20-2013, 09:28 AM

Quote:

Originally Posted by jonny..2008

all cool stuff you guys are doing.

all i did was replace the rear wheel cylinders.
and made this stop motion video of part of the job.

http://youtu.be/raGxEDB-lPc

Thanx ! I rarely have time to watch videos , this one was good as it shows others what to do .

Didja clean and re lube the threaded adjuster with LubriPlate ? .

They have simple brake spring tools that would have eased / speeded up the job greatly .

On those full floater axles , my Son got me to try Permatex " The Right Stuff "
and now I no longer use the gaskets atall , never even have any seeps much less leaks ~ give it a try next time .

I tried to post a comment on your youtube but can't .

bugmasta · 02-20-2013, 02:09 AM

Washed it
Posted via Mobile Device

54belair · 02-20-2013, 05:32 PM

I Finally got to a point where I needed to order my seats so that I could fab the mountings before primer. trailblazer seats. Both are power and heated

67Slider · 02-20-2013, 05:49 PM

Stopped by the body shop and gave her some encouragement. Shop is starting to lay some color.
[IMG]

[/IMG]
[IMG]

[/IMG]

71K20chevy · 02-20-2013, 06:07 PM

Started painting my frame!

54belair · 02-20-2013, 07:15 PM

What wheels are you running Slider? Never noticed those before----like um,!!!

67Slider · 02-20-2013, 07:53 PM

Quote:

Originally Posted by 54belair

What wheels are you running Slider? Never noticed those before----like um,!!!

Eagle Alloy #118's, 15X10's I got em for a steal and haven't seen another set on our trucks so they have kind of grown on me. I am looking for a set of 15X8's for the front but so far no luck.
[IMG]

[/IMG]

02-19-2013, 02:50 AM	#2
Square_78 Registered User Join Date: Mar 2012 Location: Okanagan Valley, BC, Canada Posts: 1,237	Re: What did you do to your truck today! Been collecting parts... STILL waiting for my air bags and CPP brakes to arrive. Brutal. Got my GMC emblems installed, and got all the side trim cleaned up and repainted. I might install it this week. I bought all my 4 guage battery cable for the compressors, 80amp fuse block, continuous duty soliniod to control the compressor power. I made up some cables tonight with the 4 guage and copper ring terminals from the battery to the fuse and made a new 4 guage ground strap to go from the battery to ground. Just been slowly plugging away at it. Posted via Mobile Device __________________ #teamlongbed "I refuse to go disc brakes. I actually love drum brakes. It makes for an adventure." - 50bomb 1978 Chevy shop truck - static 6/8" 1970 GMC 1500 - Accuair eLevel Resto-mod http://67-72chevytrucks.com/vboard/s...d.php?t=537497

02-19-2013, 08:14 AM	#3
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: What did you do to your truck today! Mister-B What type of paint did you use? __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

02-19-2013, 08:30 AM	#4
BugzC10 Registered User Join Date: Oct 2012 Location: Green Valley Arizona Posts: 1,351	Re: What did you do to your truck today! Pulled the upper steering column apart to determine why shifter is sloppy. Didn't find anything obviously wrong with it other than needed a good cleaning and lubrication. Now I can pull the shifter inward, but it still moves from park to drive without any stops. Now to dismantle, inspect and lubricate the lower section and linkage. Posted via Mobile Device __________________ 1970 C10 Short Stepper with 71/72 front clip.

02-19-2013, 11:10 AM	#6
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: What did you do to your truck today! Thanks...just looking to do mine and wanted some ideas..yours looks great __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

02-19-2013, 01:32 PM	#8
Dale_Brown Registered User Join Date: Dec 2012 Location: Pasadena, Maryland Posts: 169	Re: What did you do to your truck today! Put on my new old 1971 Maryland State tags. Thanks Maryland. Attached Images Last edited by Dale_Brown; 02-19-2013 at 03:18 PM.

02-19-2013, 08:18 PM	#9
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Re: What did you do to your truck today! Tires came in today ! Posted via Mobile Device __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

02-19-2013, 10:44 PM	#11
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today! Didn't get much done today. Or tonight. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

02-19-2013, 10:49 PM	#12
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! Did nothing on my truck today, but ordered a Comp cam 270H for my 454 to go with the Rpm intake and roller rockers I just got. Might as well go all out when it is apart and port the 781 cyl heads too while I am in there, work and more work. Ported 1 of a set of Dart Iron Eagle New cyl. heads today and reassembled, one more to go.

02-19-2013, 11:28 PM	#13
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: What did you do to your truck today! i finally got my engine back from the machine shop . i put it together and painted it. it is a 1993 chevy 5.7. my original engine had a cracked block in two spots. Attached Images

02-20-2013, 12:29 AM	#14
68 Longbed Dan Registered User Join Date: Feb 2012 Location: California Posts: 75	Re: What did you do to your truck today! I put a tarp on mine, lol. We got alot of rain today right after I got off work. It's still going. __________________ Dan 1968 Longbed Stepside C10

02-20-2013, 01:32 AM	#18
jonny..2008 Registered User Join Date: Sep 2012 Location: oregon coast Posts: 248	Re: What did you do to your truck today! all cool stuff you guys are doing. all i did was replace the rear wheel cylinders. and made this stop motion video of part of the job. http://youtu.be/raGxEDB-lPc __________________ i love every machine. even the ones i hate. Current project (1959) fifty niner gmc fleetside: http://67-72chevytrucks.com/vboard/s...70#post6514670 MY daily driver truck thread : http://67-72chevytrucks.com/vboard/s...d.php?t=544460

02-20-2013, 02:09 AM	#20
bugmasta Registered User Join Date: Aug 2009 Location: North Bend, WA Posts: 272	Re: What did you do to your truck today! Washed it Posted via Mobile Device __________________ 68 c20 build: http://67-72chevytrucks.com/vboard/s...d.php?t=358130 Club longbed ...cause girls like'em long!!!!!

02-20-2013, 05:32 PM	#21
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: What did you do to your truck today! I Finally got to a point where I needed to order my seats so that I could fab the mountings before primer. trailblazer seats. Both are power and heated Attached Images __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030 Last edited by 54belair; 02-20-2013 at 05:33 PM. Reason: additional info

02-20-2013, 05:49 PM	#22
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: What did you do to your truck today! Stopped by the body shop and gave her some encouragement. Shop is starting to lay some color. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

02-20-2013, 06:07 PM	#23
71K20chevy Registered User Join Date: Jul 2012 Location: Ft Wayne Indiana Posts: 1,204	Re: What did you do to your truck today! Started painting my frame! __________________ 71 K20 64 GMC mud truck



Register or Log In To remove these advertisements.

02-20-2013, 07:15 PM	#24
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: What did you do to your truck today! What wheels are you running Slider? Never noticed those before----like um,!!! __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

Register or Log In To remove these advertisements.