What did you do to your truck today? Chapter II - Page 222 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoStopN · 04-24-2018, 11:13 PM

I took my trailer hitch into the house.

mikelom · 04-25-2018, 03:37 AM

Installed new pads. Removed the dash bezel because I'm going to paint it.

**special-K** · 04-25-2018, 07:46 AM

Put a cap on. I have tangerine tint coming for the clear windows

Artofdeath · 04-25-2018, 08:06 AM

Quote:

Originally Posted by special-K

Put a cap on. I have tangerine tint coming for the clear windows

LMFAO! Wonderful picture right there!

Metaldoc · 04-25-2018, 12:25 PM

Quote:

Originally Posted by special-K

Put a cap on. I have tangerine tint coming for the clear windows

Tobogganing in the summer behind a boat is much more funner than in the cold winter.

**Boog** · 04-25-2018, 08:57 PM

Quote:

Originally Posted by special-K

Put a cap on. I have tangerine tint coming for the clear windows

Tangerine tint? I haven't seen weird colored window tint in I don't know when.
Hey who's the mountain man posing?

FRCvette · 04-25-2018, 09:42 PM

Are you guys that are dropping in engines removing the hoods. I am going to remove and replace my engine this weekend and don't want to remove hood if I do not need to.

Metaldoc · 04-25-2018, 10:38 PM

Quote:

Originally Posted by FRCvette

Are you guys that are dropping in engines removing the hoods. I am going to remove and replace my engine this weekend and don't want to remove hood if I do not need to.

Yes remove the hood just mark the hinge with tape or marker

**Steeveedee** · 04-25-2018, 11:13 PM

Quote:

Originally Posted by Metaldoc

Yes remove the hood just mark the hinge with tape or marker

No way to get the engine out without removing the hood, so tape the locations as mentioned.

**special-K** · 04-25-2018, 11:16 PM

Quote:

Originally Posted by Boog

Tangerine tint? I haven't seen weird colored window tint in I don't know when.
Hey who's the mountain man posing?

I googled colored window tint and I think it's coming from none other than Walmart! Tangerine was first to pop up. Show be close to the bubble windows. I want to frost out the ones I tint, too.
https://www.walmart.com/ip/172316088
That's exactly what he is, a mountain man. He lives in a garage, too. That's Hanson, one of the bunch across the way at Spring Carlisle. The guy I share spots with is my older son's age and so are all of them. They wear me out! Buncha buck wild boys!

InNeedofaDelorean · 04-25-2018, 01:13 PM

From yesterday, but I had the truck in the shop to figure out some wiring nightmares today. Here's "Black Cat" freshly washed. I'll have to wait to hand wash it until the weekend. Bought this truck last weekend, no rust other than the front cab mounts, a little bit on the driver floor, and the tailgate. '67 GMC 3/4 ton.

beaterku · 04-25-2018, 03:28 PM

Tore out the front suspension and steering. Going to be replacing everything except the control arms and drag link. New parts started arriving last week. I think the item I am most excited about is the faster ratio steering box

Here is the video from this week. Not much to video since it was all disassembly. Will get a lot more interesting when I start putting the new parts on!

You Tube

**special-K** · 04-25-2018, 08:16 PM

Quote:

Originally Posted by Artofdeath

LMFAO! Wonderful picture right there!

That was a total photobomb. My wildass buddies were hanging across the isle when I decided to snap some pics of my truck last weekend at Carlisle. Crazy Hanson saw the flas and was over in a flash. I knew he was there as I aimed and feared he was going down farther than that. Thank GAWD he didn't

Quote:

Originally Posted by Metaldoc

Tobogganing in the summer behind a boat is much more funner than in the cold winter.

I bet it is. This was at Spring Carlisle but if you said it was Winter Carlisle on Thursday or that night I would've believed you. 45 for the high with rain sideways between a few glances at the sun, wind, snow blowing, and 22 degrees that next morning! That aluminum cap was an ice box.

Quote:

Originally Posted by InNeedofaDelorean

From yesterday, but I had the truck in the shop to figure out some wiring nightmares today. Here's "Black Cat" freshly washed. I'll have to wait to hand wash it until the weekend. Bought this truck last weekend, no rust other than the front cab mounts, a little bit on the driver floor, and the tailgate. '67 GMC 3/4 ton.

Your sure got a good one. I'm very jealous. Never seen 69-72 grille surround used with a 67/68 hood before. Didn't think it could work.

Yobyllib · 04-25-2018, 06:04 PM

I put bags in the back of my truck, now to do the fronts.

cornerstone · 04-25-2018, 06:59 PM

I got some more epoxy primer laid down, next onto the front clip.

NoStopN · 04-25-2018, 08:16 PM

Quote:

Originally Posted by InNeedofaDelorean

'67 GMC 3/4 ton.

Hmmm. Maybe that '67 grille will fit mine without changing a bunch of trims parts around it.

Quote:

Originally Posted by beaterku

I think the item I am most excited about is the faster ratio steering box.

New box from Redhead?

71cheyennesuperlongb · 04-25-2018, 08:41 PM

Went with my neighbour to pick up 6 2by 12 by 16 feet white oak boards for our tandem car trailer.Now for lights,paint ,new fenders everything else.

**special-K** · 04-26-2018, 08:18 AM

Having fun with this new to me old truck cap. I have the tangerine tint on it's way and I also have this 50 state set of travel stickers coming

Artofdeath · 04-26-2018, 04:00 PM

Took advantage of the nice weather today and pulled the bed off the frame. Need to weld new mount perches on then I am going to pressure wash and rust proof the frame. Fun stuff!

Jim Boy · 04-26-2018, 04:15 PM

Rolled the beast out today for the first time this year. The wife came out and said instead of standing there looking at that money pit go to the nurseries and get the trees we need. So first day hauling trees. All men need a truck if they are married!!!!! Have a good one eh!

Metaldoc · 04-26-2018, 06:19 PM

Quote:

Originally Posted by Jim Boy

Rolled the beast out today for the first time this year. The wife came out and said instead of standing there looking at that money pit go to the nurseries and get the trees we need. So first day hauling trees. All men need a truck if they are married!!!!! Have a good one eh!

I agree that's why I have 2 trucks one for the winter and one for summer. Got all the pieces cut for the tranny mount with my CNC plasma grinder. I made some cut outs for debris to be washed out.

iriereggaeman · 04-27-2018, 05:00 PM

Quote:

Originally Posted by Jim Boy

Rolled the beast out today for the first time this year. The wife came out and said instead of standing there looking at that money pit go to the nurseries and get the trees we need. So first day hauling trees. All men need a truck if they are married!!!!! Have a good one eh!

That's the quote for the wee! "All men need a truck if they are married!!!!!" Word, brutha.

**ohboy321** · 04-27-2018, 07:47 PM

Today I cleaned up a couple of wheel cylinders using a vintage AAMCO brake honing set I inherited from my Dad.

1968 baby blue C10 · 04-26-2018, 06:45 PM

Quote:

Originally Posted by special-K

Having fun with this new to me old truck cap. I have the tangerine tint on it's way and I also have this 50 state set of travel stickers coming

That’s going to be awesome. Where did you get the stickers from?

1968 baby blue C10 · 04-26-2018, 06:47 PM

Gave her a wax today. Maybe the first time the truck has ever been waxed haha

04-24-2018, 11:13 PM	#1
NoStopN Registered User Join Date: Jul 2016 Location: Murfreesboro, TN Posts: 229	Re: What did you do to your truck today? Chapter II I took my trailer hitch into the house. __________________ 1969 GMC 2500. 250 I6, 4-speed w/ granny low

04-25-2018, 03:37 AM	#2
mikelom Registered User Join Date: Mar 2018 Location: GA Posts: 104	Re: What did you do to your truck today? Chapter II Installed new pads. Removed the dash bezel because I'm going to paint it. Last edited by mikelom; 04-25-2018 at 03:43 AM.

04-25-2018, 07:46 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: What did you do to your truck today? Chapter II Put a cap on. I have tangerine tint coming for the clear windows Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-25-2018, 09:42 PM	#7
FRCvette Registered User Join Date: Mar 2007 Location: cincy Posts: 693	Re: What did you do to your truck today? Chapter II Are you guys that are dropping in engines removing the hoods. I am going to remove and replace my engine this weekend and don't want to remove hood if I do not need to. __________________ There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb

04-25-2018, 01:13 PM	#11
InNeedofaDelorean Registered User Join Date: Oct 2007 Location: Raytown, Missouri Posts: 130	Re: What did you do to your truck today? Chapter II From yesterday, but I had the truck in the shop to figure out some wiring nightmares today. Here's "Black Cat" freshly washed. I'll have to wait to hand wash it until the weekend. Bought this truck last weekend, no rust other than the front cab mounts, a little bit on the driver floor, and the tailgate. '67 GMC 3/4 ton. Last edited by InNeedofaDelorean; 04-25-2018 at 01:18 PM.

04-25-2018, 06:04 PM	#14
Yobyllib Registered User Join Date: Jul 2011 Location: Victoria, BC Canada Posts: 26	Re: What did you do to your truck today? Chapter II I put bags in the back of my truck, now to do the fronts. Attached Images

04-25-2018, 06:59 PM	#15
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: What did you do to your truck today? Chapter II I got some more epoxy primer laid down, next onto the front clip. Attached Images

04-25-2018, 08:41 PM	#17
71cheyennesuperlongb Registered User Join Date: Aug 2015 Location: Alcoa;Tn Posts: 208	Re: What did you do to your truck today? Chapter II Went with my neighbour to pick up 6 2by 12 by 16 feet white oak boards for our tandem car trailer.Now for lights,paint ,new fenders everything else. __________________ '71 Cheyenne Super LWB - Second Owner in 39 Years! '70 CST/10 SWB - Soon to be Daughter's truck when finished

04-26-2018, 08:18 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: What did you do to your truck today? Chapter II Having fun with this new to me old truck cap. I have the tangerine tint on it's way and I also have this 50 state set of travel stickers coming Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-26-2018, 04:00 PM	#19
Artofdeath Registered User Join Date: Jul 2017 Location: Sandusky, Ohio USA Posts: 104	Re: What did you do to your truck today? Chapter II Took advantage of the nice weather today and pulled the bed off the frame. Need to weld new mount perches on then I am going to pressure wash and rust proof the frame. Fun stuff! Attached Images

04-26-2018, 04:15 PM	#20
Jim Boy Registered User Join Date: Nov 2017 Location: Wasaga Beach Ontario Canada Posts: 202	Re: What did you do to your truck today? Chapter II Rolled the beast out today for the first time this year. The wife came out and said instead of standing there looking at that money pit go to the nurseries and get the trees we need. So first day hauling trees. All men need a truck if they are married!!!!! Have a good one eh!

04-27-2018, 07:47 PM	#23
ohboy321 Senior Member Join Date: Aug 2015 Location: Dunbarton, NH Posts: 281	Re: What did you do to your truck today? Chapter II Today I cleaned up a couple of wheel cylinders using a vintage AAMCO brake honing set I inherited from my Dad. Attached Images

04-26-2018, 06:47 PM	#25
1968 baby blue C10 Registered User Join Date: Sep 2017 Location: Ravenswood, West Virginia Posts: 239	Re: What did you do to your truck today? Chapter II Gave her a wax today. Maybe the first time the truck has ever been waxed haha Attached Images __________________ 68 C10 long-fleet, Long and low is the way to go. factory: 307 sbc, SM465 4-speed, 12 bolt 4.11 rear end. 75,000 original miles. Build:Ole Blue Millennial and can drive stick. "Too many people have opinions on things they know nothing about. And the more ignorant they are, the more opinions they have." -Thomas Hildern



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.