Power Steering Adapter Plates

[andytobinskb]

Hello I was wondering if this bracket or one that you make would work for my 1968 4x4. My frame does not have any dimples or a bend in the frame it is just flat. Thanks in advance for your help.

[Captainfab]

I have sold many of my steering box adapter plates to customers that have installed them on their '60-'68 K series frames. I just do not have installation instructions or a template specific to the K series. However we have the very good detailed info in this build thread to help you get the steering box correctly located.


http://www.67-72chevytrucks.com/vboa...632508&page=6t

Originally Posted by andytobinskb

Hello I was wondering if this bracket or one that you make would work for my 1968 4x4. My frame does not have any dimples or a bend in the frame it is just flat. Thanks in advance for your help.

[andytobinskb]

Thank you for your knowledge. I will be ordering one in the near future. Do you also make the steering linkage with the universal joints that i saw in the thread that you shared.

[Captainfab]

No I do not currently make a collapsible steering shaft coupler with u-joints. I have been wanting to but just not enough time with working 80hrs/7 days a week every week every month.

Originally Posted by andytobinskb

Thank you for your knowledge. I will be ordering one in the near future. Do you also make the steering linkage with the universal joints that i saw in the thread that you shared.

[Tscustoms]

I'm looking to purchase one of the brackets for my 65. I have sectioned my crossmember 2" and moved forward am inch. Will I be able to move the bracket the same to correct my steering

[Captainfab]

With what you are doing, the supplied template will be of no use. I have no idea what you will need to do to mount and support the steering box adapter plate as I have never done anything like this.

Originally Posted by Tscustoms

I'm looking to purchase one of the brackets for my 65. I have sectioned my crossmember 2" and moved forward am inch. Will I be able to move the bracket the same to correct my steering

[Tscustoms]

Does the. Template line up with the factory holes for the non power steering box

[Captainfab]

The installation template does reference the holes for the original steering box to position the power steering box.

Originally Posted by Tscustoms

Does the. Template line up with the factory holes for the non power steering box

[HugoV]

Captainfab - I am sure this has been answered already but I am short on time this morning to search on your thread...

I have a power steering box from a 68-72 truck that I need to install on my 64' c10 2wd, will this bracket be the one I need in order to get that done?

If so, send me a message on where to send payment and how long it will take to get to me to 98059.

Thanks!

[Captainfab]

All '68-'86 C/K series and '87-'91 R/V series steering boxes are all interchangeable.

Do you need just the steering box adapter plate, or do you also need the tube and flange?

I will send you a PM with ordering and payment info.

[spitfire980]

I have a 67 C10 and was i wondering if you can manufacture the required four 1/4" thick spacers for the power steering box to fit.

Since in my part of the world, cutting up the frame is in instant registration fail and the manufacturing quality isint the best in the world if i wanted to fab the spacers myself

Thanks

[Brad54]

Without going thru the whole gazillion-page thread on my phone, do you make an adapter for 4x4 chassis? In my case,
60-62.

[Captainfab]

I do not make a steering box adapter plate specifically for the K series frames. I have sold many of these plates to customers that have installed them on their K series frames. Check out Les Otte's installation on his '64.

http://www.67-72chevytrucks.com/vboa...632508&page=6t

Originally Posted by Brad54

Without going thru the whole gazillion-page thread on my phone, do you make an adapter for 4x4 chassis? In my case,
60-62.

[oldarky66]

Captainfab,
I need one of your power steering adapter plates. Please send all necessary info at your convenience.
Thanks.

[Captainfab]

I will send you a PM........

Originally Posted by oldarky66

Captainfab,
I need one of your power steering adapter plates. Please send all necessary info at your convenience.
Thanks.

[oldarky66]

Captain,
Mailed you the MO for power steering plate adapter this morning. Did this before seeing your latest pm so sorry it does not include my forum user name.
I'll post on here when I receive it.
Thanks,
Wade

[cwumed]

Captain, is like to purchase a bracket from you. Thank you sir, Matt
Posted via Mobile Device

[66 C-10 fleet]

Would you please send ordering info for the adaptor plates for a 66 chevy please.

[Captainfab]

I will send you both PM's with purchasing info.

[bosephus]

Order info for 60-62 power steering adapter and axle saddles please. Thanks,Bo

[Captainfab]

I will send you a PM.........

Originally Posted by bosephus

Order info for 60-62 power steering adapter and axle saddles please. Thanks,Bo

[RussC10]

I just sent you an email requesting pricing for the power steering adapter and the column tube for my 66.

[Captainfab]

I replied to your email earlier.

Originally Posted by RussC10

I just sent you an email requesting pricing for the power steering adapter and the column tube for my 66.

[RussC10]

Just sent you $$$$$ via paypal.
Thanks.

[Homebuilt Hotrods]

could use a PS adapter myself for my 65 c10 frame. This comes with instructions and template still for install? Please send me the info. Thanks.