![]() |
|
![]() |
#1 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
so each one of those Battery Packs (consisting of six Cell Modules) is 9.1 kW and I plan on running at least two of them in the front and one or two more under the cab and or the bed of the truck
general rule based on my experience with a Nissan Leaf for three years says you can expect roughly 3 miles per killer watt so 9.1 times 3 equals a range of 27.3 miles per pack now I get that by dividing my Leaf range of 84 miles by it's 24 kW battery pack which gives me 3.5 mile average per killer watt and because my vehicle may be heavier and less aero dynamic I round that down to 3 miles instead of 3.5, kapish and we can thumb wrestle over this till the cows come home, but I can also tell you that, that Leaf has seen a range of as high at 106 miles on the same battery pack so there's that, it all depends on your driving 'habbits" as they say |
![]() |
![]() |
![]() |
#2 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
second verse, same as the first
|
![]() |
![]() |
![]() |
#3 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: My Dusty 71 GMCe Electruck
Those fit in there pretty nicely. So you're thinking you will have roughly 160 miles of range with those 6 batteries?
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#4 | |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
Quote:
I plan on having at least three of those battery packs so a total of 18 of those "batteries" twelve up front and another six under the bed |
|
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Apr 2008
Location: San Diego California
Posts: 1,316
|
Re: My Dusty 71 GMCe Electruck
Whoa, so one battery pack only gets 27 miles? Did I miss how the Leaf got close to 106 miles from its pack? Seems like a lot of batteries for 80ish miles. Are the new 2020 and newer batteries more efficient or just more of them? Some adds for the current electric vehicles claim 300 or more miles per charge. how do they accomplish this range?
__________________
I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583 |
![]() |
![]() |
![]() |
#6 | |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
Quote:
this one is only 9 kWh the leaf one is 24 kWh just last night I received some good news from a fellow EV Converter running the exact same battery pack and transmotor and he confirmed we can now calculate 3.25 miles per kWh if not 3.5 (son on par with the Leaf) I was being conservative at 3 miles per kWh the BMW pack is much much more bang for physical space the Leaf battery pack is huge Last edited by Gregski; 03-27-2022 at 06:28 AM. |
|
![]() |
![]() |
![]() |
#7 | |
Registered User
![]() Join Date: Apr 2008
Location: San Diego California
Posts: 1,316
|
Re: My Dusty 71 GMCe Electruck
Quote:
__________________
I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583 |
|
![]() |
![]() |
![]() |
#8 |
Active Member
![]() Join Date: Jun 2021
Location: Rancho Cucamonga California
Posts: 170
|
Re: My Dusty 71 GMCe Electruck
Fun project! More value as of lately
|
![]() |
![]() |
![]() |
#9 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
|
![]() |
![]() |
![]() |
#10 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
Costco Jack & Craigslist Jill what could possibly go wrong
Oh no it's too big! how many times have I heard that before [don't nobody answer that!] |
![]() |
![]() |
![]() |
#11 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
someone once said you haven't wrenched until you made or modified yer own tool, am I right fellas
I once volunteered at a motor cycle shop for Big Al the man who sold me this truck, we quick become friends, and I asked him once why he cut his ratchets down to stubbies and he said: "cause I got tired of snappin' them bolts" that's some street credit right there you feel me Young Blods? |
![]() |
![]() |
![]() |
#12 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
so let me get this straight, now we needs a jack to put the transmotor on the jack and we needs another jack to lift the rig up on ramps to git that trans on this jack under the jacked up rig??? follow all that? ha ha
this sounds like one of them two things we likes like chocolate and steak just not together there deals I recon all them hernias from bench pressing those 850 lbs transmissions [I'm looking at you Muncie SM465] was a worth it shout out if you know what a Granny Low SM465 feels like, ha ha |
![]() |
![]() |
![]() |
#13 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
so here we go again, another one man slow dance
|
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,328
|
Re: My Dusty 71 GMCe Electruck
Trying to play catch up, and it's tough for an old guy. The batteries looked good inside the frame rail. Can you run them toward the tail end further too? Looked like there was some frame back there to put another row. If I remember your work from before, you've already considered that.
Also, like the jack conversion. Beats getting a buddy and laying on your backs to try and muscle that thing in!!! Did that with a Torqueflight 727 when I was much younger.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#15 | |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
Quote:
with the truck almost one foot off the ground on blocks, I still could not roll the trans on the jack under it, so here I am literally hoisting up the trans with an engine crane just so I can set it on that stupid jack with the trans adapter on it, PIA PIA major PIA RECOMMENDATION: Do NOT Buy! |
|
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,328
|
Re: My Dusty 71 GMCe Electruck
I got the HF trans jack, worked ok for the 4L60.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#17 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
was it this thing?
|
![]() |
![]() |
![]() |
#18 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
just increased my chances of injury by 400%
making a bell housing block off plate since there will no longer be a Lexus V6 internal combustion engine in front of this hybrid transmission or transmotor as I call it, because there are two electric motors inside of it |
![]() |
![]() |
![]() |
#19 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
took a bit of back and forth, and for some odd reason Lexus decided to use two different sizes of bolts on this bell housing, the red circles mark the larger ones which in SAE or American standard sizes equate closer to a 1/2" and the smaller ones are roughly 7/16s
it may take another round of nip and tucking to get the plate to match that weird shape it happens to be Last edited by Gregski; 03-27-2022 at 06:56 AM. |
![]() |
![]() |
![]() |
#20 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
next it was time to work on the Ninja star, this is the clutch plate coupler I cut out of the original clutch plate thingie, I will be using it to lock out the input shaft of the transmission, doing so will force the front electric motor to spin the output shaft assisting the second larger electric motor, win win
|
![]() |
![]() |
![]() |
#21 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,328
|
Re: My Dusty 71 GMCe Electruck
Are you going to convert the space in front of the transmotor into a trunk?
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#22 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
|
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,328
|
Re: My Dusty 71 GMCe Electruck
Put some motor mounts on and the radiator, with torn off hoses like it just jumped out of there somewhere along the way.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#24 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
that would be hilarious, and stand there all like: "it's the second time this has happened this week, damned LS!"
|
![]() |
![]() |
![]() |
#25 |
Post Whore
![]() Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,835
|
Re: My Dusty 71 GMCe Electruck
cutting 1/2" aluminum plate a mil at a time using my FREE Craigslist Craftsman Radial 10" saw with a Diablo 84 tooth non stick blade, yeah baby
thrilling I tell yah! Craftsman Radial Saw cutting aluminum plate |
![]() |
![]() |
![]() |
Bookmarks |
|
|