|
07-27-2020, 11:29 AM | #1 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,940
|
Re: Johns 66
Quote:
There's also another option.... I've ground the shaft flat in that area so a standard flat spacer can be used. This was during a disc swap & various years of parts were utilized. I don't know exactly what you have but I know there's more than one way to solve the dilemma.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
07-27-2020, 11:57 AM | #2 |
Senior Member
Join Date: Aug 2017
Location: Louisville, KY
Posts: 368
|
Re: Johns 66
John not sure what all bolts you're needing but a local place here has full front end bolt kits for a littel cheaper then going to the hardware store and they are correct length and tapered.
http://sokyclassics.com/product.php?skcid=1003942 They also have a stainless option and they are really quick at shipping. Best of luck! |
07-28-2020, 11:15 AM | #3 | |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Johns 66
Quote:
Are you looking for item #9 in the attached diagram or the round washer that is flat on one side and concave on the other side that goes against the frame between the frame and the shims (item #8)?
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
|
07-28-2020, 05:58 PM | #4 | |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
Quote:
The ones I took off were round, if I remember correctly one set had a concave face and one set had a convex set. Based on the drawing you posted they definitely go ion Bolt #7
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
|
07-28-2020, 06:20 PM | #5 |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
I found this pic of what I am needing....maybe this helps
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
07-30-2020, 02:41 PM | #6 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Johns 66
That is the one I was trying to describe. I have seen them available from somewhere but can't remember where.
I see that Rocknrod found a link to a similar part at POL, looks like those should work.
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
08-03-2020, 10:14 AM | #7 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Johns 66
I found a set, but they are slightly thicker than the one in the picture. $10 to cover shipping and they are yours if you want them.
Karl
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
08-03-2020, 11:04 AM | #8 | |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
Quote:
Do you happen to have the big washer bolts that go on the inside at the bottom of the front fender?
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
|
08-03-2020, 02:11 PM | #9 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Johns 66
John, I don't use paypal anymore. I switched to Venmo, but I think someone else is going to take care of this for you. I will need your mailing address to ship out the parts. I most likely have those too. I will look through my stash at home and at my shop. If I have them, I'll put them in the same package.
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
08-03-2020, 02:31 PM | #10 | |
Registered User
Join Date: Mar 2016
Location: Manlius, NY
Posts: 1,698
|
Re: Johns 66
Quote:
|
|
07-30-2020, 01:12 PM | #11 |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
Well I may not have any bolts to put things back together....but Babe got a new set of shoes today with a lil bling to go with it
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
07-30-2020, 04:57 PM | #12 |
Registered User
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 967
|
Re: Johns 66
|
07-30-2020, 06:51 PM | #13 | |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
Thanks
Quote:
Big Moe..... The rear is 5.5" backspacing, and the fronts are 4.5" front tires are 245/50/20 and the rears are 275/45/20
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
|
08-13-2020, 11:31 AM | #14 |
Senior Member
Join Date: Mar 2011
Location: Tucson, Arizona
Posts: 2,069
|
Re: Johns 66
Hey John, I bought the same wheels but with the grey spokes. Mine are 17x8. What size did you get and what is the tire size?
__________________
Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing. |
08-13-2020, 12:19 PM | #15 | |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
Quote:
front tires are 245/50/20 and the rears are 275/45/20
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
|
07-30-2020, 01:50 PM | #16 |
Senior Member
Join Date: Aug 2017
Location: Louisville, KY
Posts: 368
|
Re: Johns 66
Looking good.
|
07-30-2020, 07:23 PM | #17 |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
The more stuff I do and buy for my truck the more I am amazed at things and how businesses are run...Some you can tell are small businesses and try their best to take care of the customers, some seem like bigger businesses and don't have a clue.
For example....I bought my wheels and tires from a guy in Atlanta, Russ.....I told him what I had as far as vehicle, told him what I wanted and poof....he has them on the way. I paid 1750.00 for Ridler 5 spoke wheels...there were mounted and balanced with a set of lugnuts and were delivered to my door, when they said there were gonna be here...in perfect condition. Second example is I got my rear axle conversion kits yesterday from CPP....They sent me 4 boxes...and boxes weren't damaged...So I waited until today when I got my wheels to make sure they mated up. Come to find out they sent me an extra kit of axles, drums etc....Of course trying to do the right thing I called them....and after waiting 20 minutes on hold they had no clue that 1. that they sent 2 sets, or 2. how to get them back. I checked my account and I was only charged for 1 set. I asked the guy to send me a call tag and have the extra set picked up....it was like a foreign concept. Anyways they were the right ones and mate up to the wheels perfectly.....One last thing is that I paid 344.00 with taxes and of course they are made in china.....Im amazed that they can make these, send them on a boat and be cheaper than if it was made here.
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
07-30-2020, 10:38 PM | #18 |
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,450
|
Re: Johns 66
Dadgum, those are some fancy wheels! That is pretty weird that they didn't even realize they sent 2 sets for the axles
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
07-30-2020, 10:43 PM | #19 | |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
Quote:
They eventually did sent me some return labels and Ill get them sent back tomorrow....as they say....Never wrong to do the right thing.
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
|
07-30-2020, 10:51 PM | #20 | |
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,450
|
Re: Johns 66
Quote:
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
08-01-2020, 02:18 PM | #21 |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
Welp I have ordered some grade 8 bolts from Wholesalebolts.com...so we will see how that goes.
So I went over to my brother in laws, Randy's shop to check on ole girl.....and didn't like what I saw.....There were about 3 places that the primer had cracked and flaked off...not really sure why... Im gonna go to a local body shop and see what they say it could be...Im afraid I will have to take it all back down to metal...but would rather do that that have the paint flake off. They sprayed my buddies truck a few years back and did a great job...may see what it cost for them to spray the color, especially after the cracked primer revelation. Also found a shop to rebuild my rear end and do the axle swap for me.....gonna run me 150.00 but think its worth it...don't want no issues with the rear end......so Ill get it pulled out this week and get that taken care of...And when the bolts arrive the chassis is going back together!!!!!!!
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
08-01-2020, 06:31 PM | #22 |
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Johns 66
I was looking at those wheel. Good job. I recognized the first pic.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
08-03-2020, 03:43 PM | #23 |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
I really appreciate it alot Karl...and whomever was nice enough to pay the ship cost.
Andy is so right...there are really good folks on this board....aint gonna let ine bad apple spoil the bunch or joy of workimg on girl
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
08-07-2020, 08:58 AM | #24 | |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Johns 66
Quote:
Along with the 4 washer/spacers is two lower fender bolts, they are not OE correct for a 66, but should still work. Tossed in a couple of shims that was in my stash with the bolts. Hope it all works for you.
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
|
08-06-2020, 08:12 PM | #25 |
Registered User
Join Date: Apr 2017
Location: Talladega Alabama
Posts: 860
|
Re: Johns 66
Well I must be really getting old....I ordered some Grade 8 bolts, washers and lock washers...and they came in...As I looked through the box I was wondering where the nuts were...….I didn't order any......just gotta laugh at yourself some times.
Andy and I were talking and its amazing at what all goes into these trucks and how much you learn doing them yourself. I have no idea how people get these things done in a year....lol
__________________
Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4 |
Bookmarks |
|
|