Johns 66

[SCOTI]

Originally Posted by Johns 66

That would be awesome because I dont have the first clue of sizes. Do yoy have an idea of where to get the concave washers rhat fit on the studs of the ulper control arm?

If you can't find any, I can look through a box of misc hardware from over the years that might have some.

There's also another option.... I've ground the shaft flat in that area so a standard flat spacer can be used. This was during a disc swap & various years of parts were utilized. I don't know exactly what you have but I know there's more than one way to solve the dilemma.

[Android04]

John not sure what all bolts you're needing but a local place here has full front end bolt kits for a littel cheaper then going to the hardware store and they are correct length and tapered.

http://sokyclassics.com/product.php?skcid=1003942

They also have a stainless option and they are really quick at shipping.

Best of luck!

[aggie91]

Originally Posted by Johns 66

That would be awesome because I dont have the first clue of sizes. Do yoy have an idea of where to get the concave washers rhat fit on the studs of the ulper control arm?

John,

Are you looking for item #9 in the attached diagram or the round washer that is flat on one side and concave on the other side that goes against the frame between the frame and the shims (item #8)?

[Johns 66]

Originally Posted by aggie91

John,

Are you looking for item #9 in the attached diagram or the round washer that is flat on one side and concave on the other side that goes against the frame between the frame and the shims (item #8)?

Karl,
The ones I took off were round, if I remember correctly one set had a concave face and one set had a convex set.
Based on the drawing you posted they definitely go ion Bolt #7

[Johns 66]

I found this pic of what I am needing....maybe this helps

[aggie91]

Originally Posted by Johns 66

I found this pic of what I am needing....maybe this helps

That is the one I was trying to describe. I have seen them available from somewhere but can't remember where.

I see that Rocknrod found a link to a similar part at POL, looks like those should work.

[aggie91]

Originally Posted by Johns 66

I found this pic of what I am needing....maybe this helps

I found a set, but they are slightly thicker than the one in the picture. $10 to cover shipping and they are yours if you want them.

Karl

[Johns 66]

Originally Posted by aggie91

I found a set, but they are slightly thicker than the one in the picture. $10 to cover shipping and they are yours if you want them.

Karl

Karl...Pm me your paypal. I really appreciate it.
Do you happen to have the big washer bolts that go on the inside at the bottom of the front fender?

[aggie91]

Originally Posted by Johns 66

Karl...Pm me your paypal. I really appreciate it.
Do you happen to have the big washer bolts that go on the inside at the bottom of the front fender?

John, I don't use paypal anymore. I switched to Venmo, but I think someone else is going to take care of this for you. I will need your mailing address to ship out the parts. I most likely have those too. I will look through my stash at home and at my shop. If I have them, I'll put them in the same package.

[roll_the_dice]

Originally Posted by aggie91

John, I don't use paypal anymore. I switched to Venmo, but I think someone else is going to take care of this for you. I will need your mailing address to ship out the parts. I most likely have those too. I will look through my stash at home and at my shop. If I have them, I'll put them in the same package.

Well that certainly was nice of someone to pay for you John! I always knew the people on this board are the best.

[Johns 66]

Well I may not have any bolts to put things back together....but Babe got a new set of shoes today with a lil bling to go with it

[bigmoe]

Originally Posted by Johns 66

Well I may not have any bolts to put things back together....but Babe got a new set of shoes today with a lil bling to go with it

What size and backspacing did you go with?

[Johns 66]

Originally Posted by Android04

Looking good.

Thanks

Originally Posted by aggie91

That is the one I was trying to describe. I have seen them available from somewhere but can't remember where.

I see that Rocknrod found a link to a similar part at POL, looks like those should work.

That's the ones ..Im gonna order these tonight

Originally Posted by bigmoe

What size and backspacing did you go with?

Big Moe..... The rear is 5.5" backspacing, and the fronts are 4.5"
front tires are 245/50/20 and the rears are 275/45/20

[pdxhall]

Originally Posted by Johns 66

Well I may not have any bolts to put things back together....but Babe got a new set of shoes today with a lil bling to go with it

Hey John, I bought the same wheels but with the grey spokes. Mine are 17x8. What size did you get and what is the tire size?

[Johns 66]

Originally Posted by pdxhall

Hey John, I bought the same wheels but with the grey spokes. Mine are 17x8. What size did you get and what is the tire size?

The rear is 5.5" backspacing, and the fronts are 4.5"
front tires are 245/50/20 and the rears are 275/45/20

[Android04]

Looking good.

[Johns 66]

The more stuff I do and buy for my truck the more I am amazed at things and how businesses are run...Some you can tell are small businesses and try their best to take care of the customers, some seem like bigger businesses and don't have a clue.

For example....I bought my wheels and tires from a guy in Atlanta, Russ.....I told him what I had as far as vehicle, told him what I wanted and poof....he has them on the way. I paid 1750.00 for Ridler 5 spoke wheels...there were mounted and balanced with a set of lugnuts and were delivered to my door, when they said there were gonna be here...in perfect condition.

Second example is I got my rear axle conversion kits yesterday from CPP....They sent me 4 boxes...and boxes weren't damaged...So I waited until today when I got my wheels to make sure they mated up. Come to find out they sent me an extra kit of axles, drums etc....Of course trying to do the right thing I called them....and after waiting 20 minutes on hold they had no clue that 1. that they sent 2 sets, or 2. how to get them back. I checked my account and I was only charged for 1 set. I asked the guy to send me a call tag and have the extra set picked up....it was like a foreign concept.

Anyways they were the right ones and mate up to the wheels perfectly.....One last thing is that I paid 344.00 with taxes and of course they are made in china.....Im amazed that they can make these, send them on a boat and be cheaper than if it was made here.

[cwcarpenter98]

Dadgum, those are some fancy wheels! That is pretty weird that they didn't even realize they sent 2 sets for the axles

[Johns 66]

Originally Posted by cwcarpenter98

Dadgum, those iserare some fancy wheels! That is pretty weird that they didn't even realize they sent 2 sets for the axles

Thanks Christian.....yeah I could have kept the extra set and they would have been none the wiser...BUT that isnt the right thing to do.
They eventually did sent me some return labels and Ill get them sent back tomorrow....as they say....Never wrong to do the right thing.

[cwcarpenter98]

Originally Posted by Johns 66

Thanks Christian.....yeah I could have kept the extra set and they would have been none the wiser...BUT that isnt the right thing to do.
They eventually did sent me some return labels and Ill get them sent back tomorrow....as they say....Never wrong to do the right thing.

Exactly, it's always best to do the right thing

[Johns 66]

Welp I have ordered some grade 8 bolts from Wholesalebolts.com...so we will see how that goes.

So I went over to my brother in laws, Randy's shop to check on ole girl.....and didn't like what I saw.....There were about 3 places that the primer had cracked and flaked off...not really sure why...
Im gonna go to a local body shop and see what they say it could be...Im afraid I will have to take it all back down to metal...but would rather do that that have the paint flake off. They sprayed my buddies truck a few years back and did a great job...may see what it cost for them to spray the color, especially after the cracked primer revelation.

Also found a shop to rebuild my rear end and do the axle swap for me.....gonna run me 150.00 but think its worth it...don't want no issues with the rear end......so Ill get it pulled out this week and get that taken care of...And when the bolts arrive the chassis is going back together!!!!!!!

[The Rocknrod]

I was looking at those wheel. Good job. I recognized the first pic.

[Johns 66]

I really appreciate it alot Karl...and whomever was nice enough to pay the ship cost.
Andy is so right...there are really good folks on this board....aint gonna let ine bad apple spoil the bunch or joy of workimg on girl

[aggie91]

Originally Posted by Johns 66

I really appreciate it alot Karl...and whomever was nice enough to pay the ship cost.
Andy is so right...there are really good folks on this board....aint gonna let ine bad apple spoil the bunch or joy of workimg on girl

The box shipped out yesterday, tracking number for USPS is 9505512441260219275871. You should get it on Monday they said.

Along with the 4 washer/spacers is two lower fender bolts, they are not OE correct for a 66, but should still work. Tossed in a couple of shims that was in my stash with the bolts. Hope it all works for you.

[Johns 66]

Well I must be really getting old....I ordered some Grade 8 bolts, washers and lock washers...and they came in...As I looked through the box I was wondering where the nuts were...….I didn't order any......just gotta laugh at yourself some times.

Andy and I were talking and its amazing at what all goes into these trucks and how much you learn doing them yourself. I have no idea how people get these things done in a year....lol