Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by 283 Man

Im guessing you dont have a 3 speed 350 turbo transmission.. thanks anyway..

I don't have a 350 Turbo short shaft, but if I did the shipping would be more than the tranny, so you would be better off finding one locally.

[Tx Firefighter]

Originally Posted by LILRED66

Kevin:

Thanks for the follow-up. Last week was a bear...finishing up with one swap meet and getting ready for another one, so only shipped a portion of my truck parts orders last week. I will be shipping again this week, so your's will go out this week. I have to butcher a chassis for your items, so I will have a little time getting the parts cut off and packaged.

Sorry for my delay and thanks for your patience.

I'd appreciate you just refunding my paypal. I thought you were going to ship it to me last week. I am tired of waiting. I will get the stuff locally.

[LILRED66]

Originally Posted by Tx Firefighter

I'd appreciate you just refunding my paypal. I thought you were going to ship it to me last week. I am tired of waiting. I will get the stuff locally.

Sorry I couldn't turn your parts around in five days. Refund complete. Good luck with your project.

[jkade]

I am looking for a dash out of a 61 or similiar years. Pm me a price shipped to 35960 if you have one.

Thanks, Kade

[LILRED66]

Originally Posted by jkade

I am looking for a dash out of a 61 or similiar years. Pm me a price shipped to 35960 if you have one.

Thanks, Kade

Kade:

Good evening and thanks for the inquiry. I have a few good, used '60-'63 Chevy truck dashes. Are you looking for the dash cluster or the entire dash assmembly, that goes from "A" pillar to "A" pillar? Please let me know and I will reply accordingly.

[jkade]

Originally Posted by LILRED66

Kade:

Good evening and thanks for the inquiry. I have a few good, used '60-'63 Chevy truck dashes. Are you looking for the dash cluster or the entire dash assmembly, that goes from "A" pillar to "A" pillar? Please let me know and I will reply accordingly.

I need the whole dash from pillar to pillar, I am not worried about the cluster, any of the knobs, radio, heater contols, etc but I would like to have the glove box door included. If it is not too much trouble the pedal bracket that mounts to the dash and firewall would be nice and maybe the column strap. My zip is 35960.

Thanks, Kade

[64GMCHorsepower]

No problem, I just remember you as being a vendor at one time.

[rough 66]

Tony,
My wife picked me up a 66 while on deployment to the desert, however the hood is all rusted out. I am looking for hood that is in real good condition. I am also looking for the passenger side wing window assembly. I will need the complete frame and everything. I will be home in a couple weeks from deployment, and will be in Coffeyville, Ks around the 22nd of June. Any help you can give me will be greatly appreciated. If shipping is not too much my zip is 32068. Thanks for your help

Brian

[duallyjams]

Parts arrived,
Thanks
James

[LILRED66]

Originally Posted by rough 66

Tony,
My wife picked me up a 66 while on deployment to the desert, however the hood is all rusted out. I am looking for hood that is in real good condition. I am also looking for the passenger side wing window assembly. I will need the complete frame and everything. I will be home in a couple weeks from deployment, and will be in Coffeyville, Ks around the 22nd of June. Any help you can give me will be greatly appreciated. If shipping is not too much my zip is 32068. Thanks for your help

Brian

Brian:

Welcome to the forums and thanks for the inquiry. Also, thanks for the dedication to our country.

I have a few good, used hood shells, as well as, the passenger side vent window assembly. Shipping a hood is rather expensive and perhaps you can make a stop at my shop in Kansas City, KS, during your visit to Coffeyville, KS, which is about 2 hours south of Kansas City. If not, I can build a crate for a hood and have it shipped to you, via dedicated truck.

Please let me know your thoughts and I will proceed accordingly.

[Bob'sK10CHEVY]

Hey Tony i'm looking for a four row desert cooler radiator for my 66 k10 it is a strait drive(no trans cooler) do you have one or can i buy one new some where? I also am looking for a set of factory locking hubs i think i remember a thread where you said you had a restored set for sale.

[sleazytiki]

hey tony any word on the stepside fenders?

[LILRED66]

Originally Posted by Bob'sK10CHEVY

Hey Tony i'm looking for a four row desert cooler radiator for my 66 k10 it is a strait drive(no trans cooler) do you have one or can i buy one new some where? I also am looking for a set of factory locking hubs i think i remember a thread where you said you had a restored set for sale.

Good morning and thanks for the inquiry. I looked high and low for a good-quality factory 4-row Harrison desert cooler, but could only find a 3-core, that was similar in style, fit and finish. I checked with all the usual suspects, that offer aftermarket parts for these trucks.

I do have a factory Harrison 4-row, that I just had recored a few months ago and it has never been installed, however it has the lower auto tranny line connections. I had it boiled-out, recored and repainted, so it looks like new. All the work I had done on it was $400.00, so I would need to get $450.00, plus shipping.

I was looking for a set of factory locking hubs for my '66 Chevy K20, but was not able to find the correct style, so I don't have a remanufactured set available. Sorry I couldn't help you with this item, but please let me know if I can help you with the radiator or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[Woogeroo]

Hiya Tony,

I am looking for the license plate bracket for a 1965 Chevrolet C10 for the painted rear step side bumper.

-W

[sleazytiki]

Does anyone here have any contact with Tony? He was supposed to ship me some items and I have not heard from in weeks.

[LILRED66]

Originally Posted by Woogeroo

Hiya Tony,

I am looking for the license plate bracket for a 1965 Chevrolet C10 for the painted rear step side bumper.

-W

Woog:

Good to hear from you. Any chance you can send me a PM with a photo of the style you are looking for. I have both styles but want to make sure we are talking about the same one. I will reply accordingly and thanks for the opportunity.

[kwernli]

Hi Tony, I'm needing one rear cab frame mount, two core support frame mounts and radiator support crossmember for a 65 4x4. I am also interested in a drivers bed side for a 65 long bed fleetside. Can you help with any of these?

Thanks!

[LILRED66]

Originally Posted by kwernli

Hi Tony, I'm needing one rear cab frame mount, two core support frame mounts and radiator support crossmember for a 65 4x4. I am also interested in a drivers bed side for a 65 long bed fleetside. Can you help with any of these?

Thanks!

Kent:

Good morning and thanks for the inquiry. Is your 4x4 a 1/2 ton or 3/4 ton? By rear cab frame mount, do you meant the mount that is attached to the frame rail or the actual cab support attached to the rear of the cab?

I have a good radiator cross member, as well as a driver side lwb fleetside bed side. Since you are in Sedalia, MO are you planning to pick these items up at my shop in Kansas City, KS or do you want me to have them delivered?

Please let me know your thoughts and I will proceed accordingly. Thanks for the opportunity and have a nice day.

[kwernli]

Tony, my truck is a 1/2 ton and I need the mounts that are riveted to the frame rail circled in red. I will come to your place to pick up the parts.
Thanks

[special-K]

When did you order the item?I don`t see anything in this thread.It appears he`s still shipping stuff out.Have you sent him a pm?

[Woogeroo]

his address, his number and his email are in his signature line...

-W

[sleazytiki]

Thanks guys I was able to get in touch with him and everything is cool.

[LILRED66]

Originally Posted by sleazytiki

Thanks guys I was able to get in touch with him and everything is cool.

I found an excellent driver side stepside fender, without the spare tire cut-out, while I was in Marina del Rey, CA, last week. I couldn't bring it on the flight back home with me, but I will have it shipped direct to you. I also have the passenger side stepside fender at my shop, so I will get that shipped to you, as well, along with the top rear shock mount.

Sorry for my delay and thanks for hanging in there with me on this.

[66BowTieBoy]

Tony,

It's the upper latch in the hood I'm looking for and the $100 buck for a gauge cluster make-over sounds like a pretty good deal.

So how much for the latch..?

Thanks.
Danny

[LILRED66]

Originally Posted by 66BowTieBoy

Tony,

It's the upper latch in the hood I'm looking for and the $100 buck for a gauge cluster make-over sounds like a pretty good deal.

So how much for the latch..?

Thanks.
Danny

The upper hood latch is $20.00, including shipping. The gauge clusters I do are not a complete refurbish, but I freshen them up pretty nice.

If you want to move forward with these items, I accept PayPal at:

4-5-6chevytrucks@sbcglobal.net

I also accept cashiers check or money order at the address in my signature. Please let me know if I can help you with these or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.