How about some pics of 67-72 Trucks

[djnutcase]

My grandpa owned this since 1969, I inherited it 9 years ago. It has a PTO winch and is stock except for the saddle tanks and wheels. 327, 4 speed, 4.57 gears (Eaton Rear).

More pics: http://www.squarewavz.com/68chev/

[sodak69c10]

here she is in its 1/4 restored glory:P

[haysonj]

Took it for its first tow did good but need to adjust trailer brakes wants to push truck on panic stops.

[88JRFAN]

LOVE YOUR TRUCK HAYSONJ. LIKE HOW IT MATCHES YOUR BOAT.

[haysonj]

Originally Posted by 88JRFAN

LOVE YOUR TRUCK HAYSONJ. LIKE HOW IT MATCHES YOUR BOAT.

Thanks its been two years in the making and I can finally see the end. Goes back to the paint shop on the 7th for pin strip and detail work then I can put the rest of the chrome on it. Built the the boat in 2003.

[krazy10]

Originally Posted by bagged69c10

Heres mine. Its all apart now cuz I Zd it but Im putting it back to gether and it should be drivable in about 2 months.
And this is my daily.

Originally Posted by Raguemoe

Some pics

Originally Posted by Kenneth_CS87

more pics of these imo

[sacustomcycle]

This year is getting off to a good start. I bought this one owner '67 Short Wide on 1/1/08. It has the original 327 and 3 on the tree.

[Already Gone]

Originally Posted by sacustomcycle

This year is getting off to a good start. I bought this one owner '67 Short Wide on 1/1/08. It has the original 327 and 3 on the tree.

Nice find. Did you stumble across the truck or was it one of those "You' ve been after it for years" and the owner finally decided to pop ?

[sacustomcycle]

I found it on craigslist. The guy listed it about 10 min before I ran across it. By the time I drove across town to get it, he had 3 other callers.

[smartcraig]

Just got it today so here is the link where i bought it , http://www.rustfreeclassics.com/Chev...CST_Orange.htm

[68chevy68]

[ecarrasco06]

My brother just picked this up New years.

[bestacy]

I Have A 1972 Gmc Sierra Grande Swb It Came From The Factory With Every Option Offered By Gm At That Time. I Have Just Completed A Total Restoration. Any Info Would Be Appreciated. Thanks Burt Stacy.

[My72ChevyC10]

Here's a couple of pictures of my 72 Chevy C10.

[slammed1]

I will join in,but still have a lot of work to be road worthy again. I bought it for 300.00 back in 1989-90 and its a 1972 SWB with wooden bed,AC cab,PS,PB,even had the factory chrome rear bumper and from what I could tell had a 350/th350 combo but no engine and tranny when it was purchased by me.

I started cleaning up the truck and getting it ready when I found a buildable 454,so during the clean up process I had some parts in the bed of my brothers truck and one nite he parked it on the street in frt of the house only to find some nice parts like my factory chrome rear bumper and more stolen. I ended up removing the 72 cab in exchange for a $50.00 71 pretty solid non ac cab with typical rusty rockers in better shape.The truck was true 72 until I backed up into it with my jeep and ruined a cherry 72 shell,so I found a 68 entire frt clip for 50.00 and used it on the truck. I ended up getting the 454 built with a 350 tranny and actually on the street when I moved to Tulsa in the mid 90's. After quite a few drag strip passes at the Midnite Drags in Tulsa I spun a rod bearing so the truck sat until around 1994 with a wounded engine.

Moved back to FortSmith and the truck was sitting idle until I built a 408 small block for my street 67 Impala and a 327 for my drag 68 Nova at the same time,after around 2 years of very playful street driving the impala with 4.10's and 3500 10" stall with the 408,I decided to place that engine in the truck with stock stall convertor and open 3.08 gears........talk about fun stepping on the gas at 40 mph and blazin the right rear.

After going through a divorce and selling my 68 Drag Race Nova,I heartedly held on to my truck and started doing some work while trying to keep my sanity. I ended up doing alot of body work,ordered a ECE drop kit and customized it to a 5-8 slam job,and stopped there as it sits in its present day status like the garage pictures show.

This is the truck after 408 installed with home brew drop

These 2 pictures were during the body work stages (notice door handles and cowl scoop)


This next bunch of pictures show its stage after body work partially done,no engine,and as it basically sits today waiting its turn in the garage again.

[Legend56BC]

This is my 72 Chevy C10 streetstock truck 2007

[Legend56BC]

Found a better shot at the beginning on 2007,we race out of BC @ SunValley Speedway in Vernon and Agassiz out side of Vancouver,streetstock class 355/Auto 373 limited slip comes in @ 3390Lbs with me and a full tank in it.

['71c10]

Green Machine

[Gray Ghost]

Your green machine is a good lookin truck!

[68GMC910]

These are some picture of my '68 GMC 910. It has a 250 I6 in it right now, but is getting a 350 soon. I bought it about a year ago for $500 dollars.

[67-72trucks]

Heres My 1972 Chevrolet Cheyenne C10. Father & Son Projects


Ron's Auto Body
Houghton, Michigan 49931

[Ol'Rover]

Originally Posted by Legend56BC

This is my 72 Chevy C10 streetstock truck 2007

catchin sum tires there eh

yah nice truck!

[67-72trucks]

Originally Posted by 67-72trucks

Heres My 1972 Chevrolet Cheyenne C10. Father & Son Projects


Ron's Auto Body
Houghton, Michigan 49931

Working on a 69 GMC SWB 4x4/72 K10 cheyenne

[67-72trucks]

1972 Chevrolet Cheyenne

[wnc mountain]

I think this may be the first post of my truck since 2002. Not much has changed. Think I have added 2,000 miles and have done a ECE 2/4 drop. Just been gathering parts.