My 86 build

[mooseknuckles]

it still needs some work around the tailgate to get it fitting beter to close right, but everything else turned out ok. just didnt go as smooth as I thought it would.

[mcboomport]

Nice work!
Posted via Mobile Device

[mooseknuckles]

....I'll see if I can make it better today!

[mooseknuckles]

...did some more work on the bed floor today, I had to take the pass side off and do a little trimming to get it to fit perfect, also got the headboard nice and tight and welded it on. I have a few more holes to drill and I'll have to get some longer bolts tomorrow. and still have to finish up arond the back panel and tailgate...

[luifer76]

it looks really good bro....great job.....

[mooseknuckles]

thanks man.

[1tonchevy]

Great build man! questins for ya. how hard was it to cut off your rear axle perces and re weld them on and than find the pinion angle? i'm thinking about doing my own home made rear flip...

[mooseknuckles]

I had to use a 4 1/2" grinder with a cut-off wheel, it was a ***** because its hard to get at, but a plasma would be way easier...on the pinion angle I just got it close to where I thought it looked in line with the driveshaft, and welded the perches back on...it was pretty close, but if you can get a hold of an angle gauge its more accurate. I didnt really care because I knew that I was gonna link it. might I suggest that you go to the auto parts or trailer store and buy a new set of spring perches. its a lot less work!

[1tonchevy]

Originally Posted by mooseknuckles

I had to use a 4 1/2" grinder with a cut-off wheel, it was a ***** because its hard to get at, but a plasma would be way easier...on the pinion angle I just got it close to where I thought it looked in line with the driveshaft, and welded the perches back on...it was pretty close, but if you can get a hold of an angle gauge its more accurate. I didnt really care because I knew that I was gonna link it. might I suggest that you go to the auto parts or trailer store and buy a new set of spring perches. its a lot less work!

where can i find perches? everytime i ask around ppl look at me like i have 3 heads :S

[mooseknuckles]

any autoparts store should be able to get them. with a good counter parts guy.....look for moroso, mr. gasket, even mopar performance has them in there catalogs.

[mooseknuckles]

moroso...

[mcboomport]

Originally Posted by 1tonchevy

Great build man! questins for ya. how hard was it to cut off your rear axle perces and re weld them on and than find the pinion angle? i'm thinking about doing my own home made rear flip...

You don't need to cut them off for a flip kit. I have a pdf of the flip brackets if you want it. I had mine made at a steel shop.
Posted via Mobile Device

[1tonchevy]

Originally Posted by mcboomport

You don't need to cut them off for a flip kit. I have a pdf of the flip brackets if you want it. I had mine made at a steel shop.
Posted via Mobile Device

That would be great! onlything is are the dimensions for a 1/2 ton or 1 ton? mines a dually.

[mcboomport]

Originally Posted by 1tonchevy

That would be great! onlything is are the dimensions for a 1/2 ton or 1 ton? mines a dually.

They are for a half ton. I'll grab the file at work tomorrow for you. It's fully dimensioned, so you could measure your perch first to make sure it will work. If you use the brackets, make sure you make shock extender brackets as well.
Posted via Mobile Device

[1tonchevy]

Originally Posted by mcboomport

They are for a half ton. I'll grab the file at work tomorrow for you. It's fully dimensioned, so you could measure your perch first to make sure it will work. If you use the brackets, make sure you make shock extender brackets as well.
Posted via Mobile Device

i have drop shocks if that matters?

[mooseknuckles]

T.G.I.F....gonna get some more done on the truck this weekend!...need to finish bolting the box on, and finish welding up the bed floor....my buddy is picking up a truck tomorrow for scrap, hes going to let me look it over before it goes....damn shame.

[73gmc454]

the bed floor looks great , your makin good progress

[mooseknuckles]

Originally Posted by 73gmc454

the bed floor looks great , your makin good progress

thanks....slowly but surely.

[mooseknuckles]

...priced out a viair dual 480 pack today $625+ tax...I may order it next week.

[luifer76]

Originally Posted by mooseknuckles

...priced out a viair dual 480 pack today $625+ tax...I may order it next week.

Nice i love those 480s man they perform really good.....

[mooseknuckles]

...so what would I need for switches, gauges, etc.

[bharrison1]

Dude you can get em cheaper that that i got mine from grunion customs they were under four shipped!!

[bharrison1]

http://grunionfabrication.com/compre...ack-p-830.html

[mooseknuckles]

wow. that is cheap!

[luifer76]

Originally Posted by mooseknuckles

wow. that is cheap!

that is cheap!!!... makes me want to get me a set also....