LS swappers, post up your pics!! - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Advanced Design** · 12-25-2015, 11:40 AM

Quote:

Originally Posted by josueh95

http://s1050.photobucket.com/user/jo...t9d4d.mp4.html
Little idle clip of my 5.3 with btr stage 4 224 230 cam fbody longtubes and hpipe

Sounds good! Do you like the Holley efi?

**Advanced Design** · 12-25-2015, 11:52 AM

Been figuring out exhaust and accessory drive fit in a 48.

dkauffman05 · 12-25-2015, 09:28 PM

My cammed ls6,t56 69 c10

**jweb** · 12-29-2015, 01:54 PM

Quote:

Originally Posted by Advanced Design

Been figuring out exhaust and accessory drive fit in a 48.

Looks like you're going to have some of the same problems I did.
I had to use a swivel thermostat housing for the lower radiator hose to fit, I also should have removed the heater hose barbs and tapped the holes for pipe thread. That way you can put a 90 in. If you don't the hoses will kink and rub against the inner fender.

Also the Sanderson headers would have been a good fit if I didn't have a GTO motor/trans. They fit tight and drop toward the back, leaving more room for your steering linkage. I ended up using Hooker block huggers, they were a pain for fitting the steering.

**Advanced Design** · 12-29-2015, 03:28 PM

Quote:

Originally Posted by jweb

Looks like you're going to have some of the same problems I did.
I had to use a swivel thermostat housing for the lower radiator hose to fit, I also should have removed the heater hose barbs and tapped the holes for pipe thread. That way you can put a 90 in. If you don't the hoses will kink and rub against the inner fender.

Also the Sanderson headers would have been a good fit if I didn't have a GTO motor/trans. They fit tight and drop toward the back, leaving more room for your steering linkage. I ended up using Hooker block huggers, they were a pain for fitting the steering.

Thanks for sharing your experiences. We have several LS based builds going in the 47 - 59 section and are figuring out the variables of what fits, doesn't fit and potential modifications needed.

Dkaufman, man that is a really clean look!

**jweb** · 12-29-2015, 04:11 PM

Only pic I have 04 GTO LS1/4L60
Posted via Mobile Device

**Advanced Design** · 12-29-2015, 10:01 PM

Nice! Is the ac compressor down low?

**jweb** · 12-29-2015, 11:27 PM

Quote:

Originally Posted by Advanced Design

Nice! Is the ac compressor down low?

No A/C I live in Oregon, we usually only have 2 weeks a year over 90 degrees

aboesec10 · 01-19-2016, 09:26 AM

My ongoing project. 2015 lt platform 5.3 with the 6l80e. Currently waiting on the ecm to come back from flashing, its proven problematic as there are 2 sets of vats on the new ones...

dwcardfan · 01-20-2016, 05:34 PM

Quote:

Originally Posted by aboesec10

My ongoing project. 2015 lt platform 5.3 with the 6l80e. Currently waiting on the ecm to come back from flashing, its proven problematic as there are 2 sets of vats on the new ones...

Very nice!!!

**Sac** · 01-22-2016, 06:19 PM

Man that's awesome! I've been saying I want the new 14+ truck motors in a C10. Thing should be a monster! Who is cutting down the harness?

aboesec10 · 01-22-2016, 06:49 PM

we've done the harness ourselves, not too bad. One big challenge is theres no power steering pump or room for one one these, the silverados use an electric rack and pinion. I solved that with an electric pump.

aboesec10 · 01-22-2016, 06:52 PM

pic, sorry its sideways. can't figure out how to flip it

TwinsSpeedShop · 02-06-2016, 11:39 AM

Here's my recently completed drop member build with cammed 6.0/T56 combo

**screaminchevypickup** · 02-24-2016, 03:14 AM

Nothing crazy just clean and simple..

**Hart_Rod** · 02-24-2016, 09:07 AM

Quote:

Originally Posted by screaminchevypickup

Nothing crazy just clean and simple..

Very nice. Can't wait to see it rolling,

!

**Hart_Rod** · 02-24-2016, 10:07 AM

My latest...

**Advanced Design** · 02-24-2016, 10:51 PM

Quote:

Originally Posted by screaminchevypickup

Nothing crazy just clean and simple..

Very clean! Can you tell us about the coil covers? They look like stock rocker covers modified?

Beautiful work!

**Advanced Design** · 02-24-2016, 10:53 PM

Quote:

Originally Posted by Hart_Rod

My latest...

Very good look Rob...super clean with touch of factory. Love this truck.

**Hart_Rod** · 02-25-2016, 12:01 PM

Quote:

Originally Posted by Advanced Design

Very good look Rob...super clean with touch of factory. Love this truck.

Thanks!

**screaminchevypickup** · 02-26-2016, 01:04 AM

Quote:

Originally Posted by Advanced Design

Very clean! Can you tell us about the coil covers? They look like stock rocker covers modified?

Beautiful work!

Thanks! They are stamped script valve covers that im running adapters on.. The coils at not under them the are relocated under the truck.

**screaminchevypickup** · 02-26-2016, 01:07 AM

Another LS swap I done a few months back

**screaminchevypickup** · 02-26-2016, 01:09 AM

Another

**66ChevyMax** · 02-26-2016, 12:25 PM

Original Crate Motor:

Upgrades to Original:

sangell · 02-29-2016, 03:49 PM

Just in the mock up stage. 2004 5.3 in front of a 2005 CTSV T56. Engine and trans mounts are made, going to final weld them tonight then re-install to confirm fitment. Then the drive train comes back out to clean and paint it along with the frame. Front clip is painted to match the firewall. Still need to make the new fuel tank and plumb the fuel system, get a third pedal installed for the manual, trim down the harness, tune, etc.

12-25-2015, 11:52 AM	#552
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: LS swappers, post up your pics!! Been figuring out exhaust and accessory drive fit in a 48. Attached Images __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

12-25-2015, 09:28 PM	#553
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 417	Re: LS swappers, post up your pics!! My cammed ls6,t56 69 c10

12-29-2015, 04:11 PM	#556
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,194	Only pic I have 04 GTO LS1/4L60 Posted via Mobile Device Attached Images

12-29-2015, 10:01 PM	#557
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: LS swappers, post up your pics!! Nice! Is the ac compressor down low? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-19-2016, 09:26 AM	#559
aboesec10 Registered User Join Date: Jan 2010 Location: Katy Texas Posts: 501	Re: LS swappers, post up your pics!! My ongoing project. 2015 lt platform 5.3 with the 6l80e. Currently waiting on the ecm to come back from flashing, its proven problematic as there are 2 sets of vats on the new ones... Attached Images

01-22-2016, 06:19 PM	#561
Sac Senior Member Join Date: Nov 2013 Location: Franklinton, LA Posts: 256	Re: LS swappers, post up your pics!! Man that's awesome! I've been saying I want the new 14+ truck motors in a C10. Thing should be a monster! Who is cutting down the harness? __________________ Green Survivor Father/Son Truck <SeveredTies>

01-22-2016, 06:49 PM	#562
aboesec10 Registered User Join Date: Jan 2010 Location: Katy Texas Posts: 501	Re: LS swappers, post up your pics!! we've done the harness ourselves, not too bad. One big challenge is theres no power steering pump or room for one one these, the silverados use an electric rack and pinion. I solved that with an electric pump.

01-22-2016, 06:52 PM	#563
aboesec10 Registered User Join Date: Jan 2010 Location: Katy Texas Posts: 501	Re: LS swappers, post up your pics!! pic, sorry its sideways. can't figure out how to flip it Attached Images

02-06-2016, 11:39 AM	#564
TwinsSpeedShop Registered User Join Date: Mar 2014 Location: Easley SC Posts: 150	Re: LS swappers, post up your pics!! Here's my recently completed drop member build with cammed 6.0/T56 combo Attached Images

02-24-2016, 03:14 AM	#565
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: LS swappers, post up your pics!! Nothing crazy just clean and simple.. Attached Images __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

02-24-2016, 10:07 AM	#567
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: LS swappers, post up your pics!! My latest... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-26-2016, 01:07 AM	#572
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: LS swappers, post up your pics!! Another LS swap I done a few months back Attached Images __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

02-26-2016, 01:09 AM	#573
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: LS swappers, post up your pics!! Another Attached Images __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

02-26-2016, 12:25 PM	#574
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: LS swappers, post up your pics!! Original Crate Motor: Upgrades to Original: __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

02-29-2016, 03:49 PM	#575
sangell Registered User Join Date: Jun 2015 Location: Overland Park KS Posts: 173	Re: LS swappers, post up your pics!! Just in the mock up stage. 2004 5.3 in front of a 2005 CTSV T56. Engine and trans mounts are made, going to final weld them tonight then re-install to confirm fitment. Then the drive train comes back out to clean and paint it along with the frame. Front clip is painted to match the firewall. Still need to make the new fuel tank and plumb the fuel system, get a third pedal installed for the manual, trim down the harness, tune, etc. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.