Crossmember Drop - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMCGRANDS · 06-08-2005, 04:52 PM

Hows it coming fastbagged68. I was courious which crossmember you went with. I wanted to see someone make the stage 3 set-up with the fully fabricated crossmember work. I got tired of trying to deal with Bill, gave up on both versions and sold all of my Bill Turner parts ( two complete set-ups) to Fastbagged68 back in March. I ended up using a Fatman stage 5 and modified it by moving it forward on the frame rails.

phantom dually · 06-08-2005, 05:39 PM

Quote:

Originally Posted by fastbagged68

I did my crossmember drop myself with Bill Turner Arms. I will get pics up soon! I have been working on my suburban every monday-thurs for the last 3 months! Almost there. Doing Brake lines and fuel lines tonight. Didn't know stainless could be so much! Get my shocks today. It is all starting to come together!

Congrats man Im glad a few people got one these together. I cant beleive the views this thread has got.

fastbagged68 · 06-08-2005, 05:55 PM

GMC GRANDS- the mustang II one I am putting in a freinds truck as soon as mine is done. The other crossmember I cut up and made it lower and sold it. The Mustang II one is going to sit on coil overs all the way around. Might end up putting an corvette independent rear in it too. We will see. I will keep you posted!

GMCGRANDS · 06-09-2005, 06:06 PM

Fastbagged68,
Post some pic's for us when you have some time. Glad to hear you are making good use of the parts.

halffast blazer · 07-26-2005, 05:06 AM

does anyone have pics of their mustang II setup installed? i would like to see how you did the steering shaft.

98L150 · 07-26-2005, 09:53 AM

Here are pics of my friends truck w/ the mustang 2 and the steering hooked up. It is tight between the header and all but it does work great onthe test drives made in the truck. Had to trim off about 1" off of the column to get it to make the angle down toward the rack.

gostranger · 07-26-2005, 12:42 PM

hats off to every one that is adding good info to this thread as a newbee c10 guy this helps me plan my attack on dropping my c10 thanks to everyone!!!!!!!!!!

fastbagged68 · 07-26-2005, 04:20 PM

I will post some pics of my suburban hopefully tonight. I need to finish up running my airlines, Clean up the welds, prep the engine compartment for paint, Finish building my motor, make my york brackets....Then it will be tearing up the streets.

halffast blazer · 07-26-2005, 05:25 PM

98L150, is that a dropped crossmember or an aftermarket unit? that's a pretty tight fit.

fastbagged68 · 07-26-2005, 05:57 PM

That looks like a Jim Meyer type crossmember. Aftermarket!

98L150 · 07-26-2005, 06:34 PM

It is a Jim Myers crossmember

GenIIIShorty · 07-26-2005, 10:44 PM

hey, any chance we can make this a sticky? definately a want for this info!!!!!

fastbagged68 · 07-27-2005, 04:23 PM

Here are some pics of my burban. Almost done. I need to finish doing my Accu Air, Mount my valves, run air lines, build brackets for engine driven compressor, dyno engine....assemble it!

milehightoyz · 07-27-2005, 04:45 PM

oh my god...that is badass!!!

halffast blazer · 07-27-2005, 05:23 PM

fastbagged68, are you running the mustang rack or factory steering? got some pics of the suspension?

fastbagged68 · 07-27-2005, 05:25 PM

Tbird rack.... Pic of my suspension are in this topic somewhere. Only thing different is it is the crossmember is welded in.

FirstGen · 07-27-2005, 07:05 PM

BTW, happy 2 YEAR anniversery on this thread, LOL!

GenIIIShorty · 07-27-2005, 10:19 PM

yay! happy anniversary!

98L150 · 07-28-2005, 09:45 AM

fastbagged68,

You may have answered this already, but what did you do for hood hinges or is it just sitting on there? Did the modification of the factory hood hinge work?

Jeff

fastbagged68 · 07-28-2005, 12:09 PM

Hood hinge is not fixed yet. Hood is just sitting on there.

phantom dually · 07-31-2005, 12:49 AM

Happy B day thread!!! Damn I spent alot of time here!!

sixty8c10 · 08-21-2005, 01:48 AM

just thought i would bring this back to the top, been seeing a few posts w/ question on bring down the front and there is alot of good info here

phantom dually · 09-11-2005, 10:51 PM

Im bringing this back to the top. Seems people have mentioned looking for it. Someone may want to make it into a STICKY thread.

bagged01extcab · 09-12-2005, 12:07 AM

Wasn't this thread a sticky at one time before?

milehightoyz · 09-12-2005, 11:58 AM

this thread is awesome ive learned so much from it, if only i couldve studied this hard in school

06-08-2005, 04:52 PM	#551
GMCGRANDS Registered User Join Date: Jan 2001 Location: Franklin , N.C. USA Posts: 105	Hows it coming fastbagged68. I was courious which crossmember you went with. I wanted to see someone make the stage 3 set-up with the fully fabricated crossmember work. I got tired of trying to deal with Bill, gave up on both versions and sold all of my Bill Turner parts ( two complete set-ups) to Fastbagged68 back in March. I ended up using a Fatman stage 5 and modified it by moving it forward on the frame rails. __________________ Mark 72'GMC Sierra Grande 2wd SWB, Fatman stageV IFS, 6.0 liter LQ4 Gen 3 and 4L80E under construction 05' GMC Sierra Denali LQ9

06-09-2005, 06:06 PM	#554
GMCGRANDS Registered User Join Date: Jan 2001 Location: Franklin , N.C. USA Posts: 105	Fastbagged68, Post some pic's for us when you have some time. Glad to hear you are making good use of the parts. __________________ Mark 72'GMC Sierra Grande 2wd SWB, Fatman stageV IFS, 6.0 liter LQ4 Gen 3 and 4L80E under construction 05' GMC Sierra Denali LQ9

07-26-2005, 05:06 AM	#555
halffast blazer Registered User Join Date: Mar 2005 Location: Texarkana, TX Posts: 65	does anyone have pics of their mustang II setup installed? i would like to see how you did the steering shaft. Last edited by halffast blazer; 07-26-2005 at 05:11 AM.

07-26-2005, 09:53 AM	#556
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Here are pics of my friends truck with steering working Here are pics of my friends truck w/ the mustang 2 and the steering hooked up. It is tight between the header and all but it does work great onthe test drives made in the truck. Had to trim off about 1" off of the column to get it to make the angle down toward the rack. Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

07-26-2005, 06:34 PM	#561
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	It is a Jim Myers crossmember __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

06-08-2005, 05:55 PM	#553
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	GMC GRANDS- the mustang II one I am putting in a freinds truck as soon as mine is done. The other crossmember I cut up and made it lower and sold it. The Mustang II one is going to sit on coil overs all the way around. Might end up putting an corvette independent rear in it too. We will see. I will keep you posted!

07-26-2005, 12:42 PM	#557
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	hats off to every one that is adding good info to this thread as a newbee c10 guy this helps me plan my attack on dropping my c10 thanks to everyone!!!!!!!!!!

07-26-2005, 04:20 PM	#558
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I will post some pics of my suburban hopefully tonight. I need to finish up running my airlines, Clean up the welds, prep the engine compartment for paint, Finish building my motor, make my york brackets....Then it will be tearing up the streets.

07-26-2005, 05:25 PM	#559
halffast blazer Registered User Join Date: Mar 2005 Location: Texarkana, TX Posts: 65	98L150, is that a dropped crossmember or an aftermarket unit? that's a pretty tight fit.

07-26-2005, 05:57 PM	#560
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	That looks like a Jim Meyer type crossmember. Aftermarket!

07-26-2005, 10:44 PM	#562
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	hey, any chance we can make this a sticky? definately a want for this info!!!!! __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

07-27-2005, 04:23 PM	#563
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Here are some pics of my burban. Almost done. I need to finish doing my Accu Air, Mount my valves, run air lines, build brackets for engine driven compressor, dyno engine....assemble it! Attached Images

07-27-2005, 04:45 PM	#564
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	oh my god...that is badass!!!

07-27-2005, 05:23 PM	#565
halffast blazer Registered User Join Date: Mar 2005 Location: Texarkana, TX Posts: 65	fastbagged68, are you running the mustang rack or factory steering? got some pics of the suspension?

07-27-2005, 05:25 PM	#566
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Tbird rack.... Pic of my suspension are in this topic somewhere. Only thing different is it is the crossmember is welded in.



Register or Log In To remove these advertisements.

07-27-2005, 07:05 PM	#567
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	BTW, happy 2 YEAR anniversery on this thread, LOL! __________________ 1968 C10 build in process TT LSA/6L90e/9"

07-27-2005, 10:19 PM	#568
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	yay! happy anniversary! __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

07-28-2005, 09:45 AM	#569
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	fastbagged68, You may have answered this already, but what did you do for hood hinges or is it just sitting on there? Did the modification of the factory hood hinge work? Jeff __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

07-28-2005, 12:09 PM	#570
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Hood hinge is not fixed yet. Hood is just sitting on there.

07-31-2005, 12:49 AM	#571
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Happy B day thread!!! Damn I spent alot of time here!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 08-21-2005 at 03:26 PM.

08-21-2005, 01:48 AM	#572
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	just thought i would bring this back to the top, been seeing a few posts w/ question on bring down the front and there is alot of good info here __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

09-11-2005, 10:51 PM	#573
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Im bringing this back to the top. Seems people have mentioned looking for it. Someone may want to make it into a STICKY thread. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-12-2005, 12:07 AM	#574
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	Wasn't this thread a sticky at one time before? __________________ Trey Oney Last edited by bagged01extcab; 09-12-2005 at 12:08 AM.

09-12-2005, 11:58 AM	#575
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	this thread is awesome ive learned so much from it, if only i couldve studied this hard in school

Register or Log In To remove these advertisements.