What did you do to your truck today?

[Chevy Fleetside]

I went to the store and bought a power steering pressure hose and installed it. Now I just need a darn 18mm wrench to tighten it up. I bought some garage door weather strip because everything I get for the truck seems to be cheap. I am thinking of useing it for inner fender to cab seal. I cut a piece and put there, it is not glued in yet because i am still thinking about it. And the 3rd pic.... Look Ma No Battery...

[CRGRS 66]

Originally Posted by catfish2

well the rag joint arrived today from "rock auto" so this evening was spent fitting the power steering, i had previously made the pump mounting brackets,acquired the hoses, and made an adaptor plate similar to captainfabs, after alot of trial and error with templates,clamps, and the like, it turned out pretty good and drives nice and smooth, i,ll do a proper alignment job at the weekend but i dont think its too far out. next job is to find a decent bench seat,[their a bit thin on the ground here in the uk.] may have to look into recovering the old tatty one.
the search function on here has been a real help to me with all the available info, thanks guys, i hope one day i can give something back.

Well, it is jolly good to hear from you! pip, pip, cherrio

you best post a picture or two of your truck, we get a little cranky if there aren't any pictures

[catfish2]

Originally Posted by CRGRS 66

Well, it is jolly good to hear from you! pip, pip, cherrio

you best post a picture or two of your truck, we get a little cranky if there aren't any pictures

here ya go. http://67-72chevytrucks.com/vboard/a...1&d=1342306811

i even coloured it in for ya, gotta go the Queen wants her trolly jack back

[LostMy65]

Originally Posted by junk4cash

Had a decal made for my ol' girl.

Nice

[fryer1979]

Got her old U-joints pulled out, as well as the old center support bearing. New bearings and U-joints reinstalled, and hopefully tomorrow before work I will have all the time I need to get them reinstalled so she will be driveable. After a several month long battle with DMV and my insurance company I finally got the new registration tags in the mail today, so she is once again legal to drive on the road (over 5 months since I paid the renewal fee....). I HATE DMV!!!!!!!!! Other than all that, getting her road worthy for a '65 and earlier car/truck/bike, and burlesque show in Carson City this weekend....

[Dingman]

Looked at it

[markeb01]

Test fit the 55 Buick floating grille bar this morning.

[fryer1979]

Put the drive shafts back in with the new u-joints and center support bearing, and took her for a drive. God that felt so good!!!!

[MikeS.]

Waited on pieces parts to come in. New floor sheet metal finally came in. I just ordered more parts.

Just added more pics to my gallery here.

[E911manager]

Keep massaging on the cab getting it ready for paint. My wife keeps telling me that she wished I would give her the attention I give the truck and I tell her "well the truck doesnt talk back"... Then the talking back really gets started... By the way my wifes backyard salvage "truck limit" is 7. I reached that with my last purchase. Sunday I went and looked at a 8th and it was not received real well... Needless to say I didnt buy it...

[JPBrecheisen]

Just updated my 1965 GMC Long Step from SM 318 to SM 420.

[dantimdad]

Removed some of the cross supports from the old bed to use on the new flatbed. Because they welded metal in the floor, I had to cut all the bolts so, it's slow going.

Steven

[CRGRS 66]

tracked down the issue with my high idle situation. Turns out the inline fuse connector on the electric choke circuit under the dash broke apart. Should have tested for power at the electric choke module on the carb first. Found an inline fuse connector, cut and crimped the wires, voila (that is french for "well, would you look at that!) purrs like a kitten again. Well, it leaks oil, there is blow by, and it is a beat up old 283, but it still purrs like a kitten to me!

[66clow]

Polished the guage bezel [IMG]http:/ http://i1249.photobucket.com/albums/...-50-42_646.jpg /[/IMG]
Posted via Mobile Device

[Big Block 454]

I bought new 18x8 and 20x10 Boss 338 wheels for my '71. Too bad the fronts don't fit. Maybe next time...

[Chevy Fleetside]

I did some small stuff and tried to mount my gas tank back up and notice one of my straps fell off during towing so now i have to order some straps. I ya...

[fryer1979]

Put the lettering kit on my grill today (finally, took me almost a year, lol). BUT, of course I forgot to take a picture....but man that nice straight, freshly painted, white bumper and grill with the lettering sure looks sharp.

[mud.man.rj]

Originally Posted by fryer1979

Put the lettering kit on my grill today (finally, took me almost a year, lol). BUT, of course I forgot to take a picture....but man that nice straight, freshly painted, white bumper and grill with the lettering sure looks sharp.

fryer, I don't know about that grill, doesn't look good here. NO PIC's haha.

[CRGRS 66]

Originally Posted by mud.man.rj

fryer, I don't know about that grill, doesn't look good here. NO PIC's haha.

The mudman speaketh! Let's see this eledged grill lettering

[MikeS.]

Not a darn thing, I'm down with a cold.

[fryer1979]

Got her as finished up as she will get for the show tomorrow and drove her to work tonight since it is on the way. Once I'm off in the morning, my car club is meeting me in my parking lot here and we're off to the Bettys, Bombs, and Bikes show over in Carson City. Gonna be a blast!

[mud.man.rj]

Man that does sound like a lot of fun, have a good time tomorow, oops kind of late now, have a good time today.

[3rd Coast Z]

Quick photo op with my buddy and his 40's something bomb at work yesterday.

[glos55]

Took tuuck to S&H Custom Auto to have bottom painted Hot Rod Flatz Red

[CRGRS 66]

Went shopping and bought her some presents...
Steering column with deluxe wheel, and horn ring, no cracks in wheel, horn ring looks to be in great condition. Not sure if I overpaid or not, $250.00 for the column c/w wheel. Also picked up tail light buckets, lenses, and a tail light harness. Also got the center caps, $10 each, in decent condition, a wash and polish should make them very presentable.
Birthday party today, so will get at it tomorrow!