1971 c10 stepside - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OhYeah!!! · 04-14-2012, 10:38 PM

I'm finally catching up with the built. It's coming along great.
Posted via Mobile Device

OhYeah!!! · 04-14-2012, 10:48 PM

And I know you and AL are shocked to see me here LOL....
Posted via Mobile Device

**lolife99** · 04-14-2012, 10:50 PM

Quote:

Originally Posted by OhYeah!!!

And I know you and AL are shocked to see me here LOL....
Posted via Mobile Device

Welcome^^^

raull · 04-14-2012, 11:09 PM

lol !!!! after telling you all day at work you are finally here ,

raull · 04-14-2012, 11:13 PM

ok i am beat i didnt have the right puller for the harmonic balance on these ls motors but after making one out of three and an hour later lol !! got it out anyways next step clean up some machine work and start the engine build , by the way did i mention that i love my new hoist , what a breeze , specially working alone , here is a before and after !!!!!

raull · 04-14-2012, 11:15 PM

sorry , here ya go im a little tired and i'm still in the garage

VA72C10 · 04-14-2012, 11:17 PM

Nice progress!!!

jmedero · 04-14-2012, 11:23 PM

What did it look like inside? Good shape?
Posted via Mobile Device

raull · 04-14-2012, 11:38 PM

Quote:

Originally Posted by VA72C10

Nice progress!!!

thanks !!!!!!

Quote:

Originally Posted by jmedero

What did it look like inside? Good shape?
Posted via Mobile Device

looks like they didnt change the oil much , for a daily driver could have gone another 100k with the right maintenance , but it was not going to hold for what im doing , im just gona build it up right to hold more boost of what i had planed , i think im going to try to hit 4 digits on the hp !!!!! lol

jmedero · 04-14-2012, 11:40 PM

Go big or go home. Lol
Posted via Mobile Device

raull · 04-14-2012, 11:44 PM

Quote:

Originally Posted by jmedero

Go big or go home. Lol
Posted via Mobile Device

lo !!!!!!l all that hp on a truck with cookie cutters on the rear !!!!!!

mcbassin · 04-14-2012, 11:45 PM

Nice progress on the motor tear down. I found out the same thing on the balancer puller a few years back. I would love to have a lift like that too.
Can't wait to see this one come together.

raull · 04-14-2012, 11:53 PM

thanks mike ,

69CST-V · 04-15-2012, 02:22 AM

Simplify your life.......Wasn't that the deal.....LOL

Great progress.

big_al_71 · 04-15-2012, 07:37 AM

Quote:

Originally Posted by OhYeah!!!

And I know you and AL are shocked to see me here LOL....
Posted via Mobile Device

Well it is about time you joined the fun......ha!!!!!

Quote:

Originally Posted by raull

lo !!!!!!l all that hp on a truck with cookie cutters on the rear !!!!!!

Looking forward to the end result mija!!!!!

Quote:

Originally Posted by 69CST-V

Simplify your life.......Wasn't that the deal.....LOL

Great progress.

Bryce "simplify" yeah right I know you did not believe that with Raul the more complicated the better....
Posted via Mobile Device

big_al_71 · 04-15-2012, 07:42 AM

Raulito I'm leaving The country for a week as you know I expect The truck build to keep moving forward till I return. Have Josie pass you the tools while I am out.
Posted via Mobile Device

raull · 04-16-2012, 09:22 AM

Quote:

Originally Posted by big_al_71

raulito i'm leaving the country for a week as you know i expect the truck build to keep moving forward till i return. Have josie pass you the tools while i am out.
posted via mobile device

have fun !!!! Be safe !!!!

raull · 04-16-2012, 09:03 PM

today i sent the heads to the machine shop to do some porting , 3 angle valve jod ss one piece valves and 120lbs comp springs to hold the higher lift cam , so in the meantime back to the air supply not done yet but here is where im at so far

Scottshotrods · 04-16-2012, 09:07 PM

looking good Raull

Justin

raull · 04-16-2012, 09:09 PM

Quote:

Originally Posted by Scottshotrods

looking good Raull

Justin

thanks bud , fuel tank came out awesome too !!!!

69CST-V · 04-16-2012, 09:15 PM

Looking good....

raull · 04-16-2012, 09:27 PM

Quote:

Originally Posted by 69CST-V

Looking good....

thanks bryce !!!!!

jmedero · 04-16-2012, 10:57 PM

Good work man. Can't wait to start back on mine.
Posted via Mobile Device

**67cheby** · 04-16-2012, 11:10 PM

Clean !!!!
Posted via Mobile Device

mcbassin · 04-16-2012, 11:37 PM

Nice work Raul. Sounds like you have a plan for the LS motor.

04-14-2012, 10:38 PM	#576
OhYeah!!! Registered User Join Date: Nov 2011 Location: South Florida Posts: 15	Re: 1971 c10 stepside I'm finally catching up with the built. It's coming along great. Posted via Mobile Device __________________ Carlos..

04-14-2012, 10:48 PM	#577
OhYeah!!! Registered User Join Date: Nov 2011 Location: South Florida Posts: 15	Re: 1971 c10 stepside And I know you and AL are shocked to see me here LOL.... Posted via Mobile Device __________________ Carlos..

04-14-2012, 11:09 PM	#579
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside lol !!!! after telling you all day at work you are finally here , __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

04-14-2012, 11:13 PM	#580
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside ok i am beat i didnt have the right puller for the harmonic balance on these ls motors but after making one out of three and an hour later lol !! got it out anyways next step clean up some machine work and start the engine build , by the way did i mention that i love my new hoist , what a breeze , specially working alone , here is a before and after !!!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

04-14-2012, 11:15 PM	#581
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside sorry , here ya go im a little tired and i'm still in the garage Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

04-14-2012, 11:17 PM	#582
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1971 c10 stepside Nice progress!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-14-2012, 11:23 PM	#583
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside What did it look like inside? Good shape? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-14-2012, 11:40 PM	#585
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Go big or go home. Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-14-2012, 11:45 PM	#587
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1971 c10 stepside Nice progress on the motor tear down. I found out the same thing on the balancer puller a few years back. I would love to have a lift like that too. Can't wait to see this one come together. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-14-2012, 11:53 PM	#588
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside thanks mike , __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

04-15-2012, 02:22 AM	#589
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: 1971 c10 stepside Simplify your life.......Wasn't that the deal.....LOL Great progress. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

04-15-2012, 07:42 AM	#591
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside Raulito I'm leaving The country for a week as you know I expect The truck build to keep moving forward till I return. Have Josie pass you the tools while I am out. Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

04-16-2012, 09:03 PM	#593
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside today i sent the heads to the machine shop to do some porting , 3 angle valve jod ss one piece valves and 120lbs comp springs to hold the higher lift cam , so in the meantime back to the air supply not done yet but here is where im at so far Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

04-16-2012, 09:07 PM	#594
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: 1971 c10 stepside looking good Raull Justin

04-16-2012, 09:15 PM	#596
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: 1971 c10 stepside Looking good.... __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks



Register or Log In To remove these advertisements.

04-16-2012, 10:57 PM	#598
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Good work man. Can't wait to start back on mine. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-16-2012, 11:10 PM	#599
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside Clean !!!! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-16-2012, 11:37 PM	#600
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1971 c10 stepside Nice work Raul. Sounds like you have a plan for the LS motor. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Register or Log In To remove these advertisements.