my '64 c-10 swb project with steel floor from a '70 - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chad64chevy · 10-21-2013, 07:54 PM

this is the bracket I bent up to mount the trans dipstick off the firewall enough to fill it and be able to use it to! I also had to grind the oil dipstick down a lil to fit, got it installed too! also got my fuel pump installed! I did a lil work on the truck sunday I started to strip my driver door down then stopped when I found a lot of bondo! So I stopped and I think i'm going to look for another driver door, its going to be to much work to try and fix, I forgot to take a pic of the door and the oil dipstick installed!

allaboutchevelles · 10-21-2013, 08:08 PM

motor looking good chad. nice work

chad64chevy · 10-21-2013, 08:12 PM

Quote:

Originally Posted by allaboutchevelles

motor looking good chad. nice work

thanks! the wife said I needed to clean out the storage and start putting all my parts on the truck, lil by lil i'm cleaning out the storage, lol!!

Modges'66 · 10-21-2013, 08:55 PM

Dude!
The motor is lookin sweet!
I'm sure that you can hardly wait to hear it purrrrrr!
I know how anxious that I am to hear mine fire-up, and it makes me crazy with anticipation!...So I feel your pain!
It is really hard to stay focused on other items with a fresh motor staring you in the face!!!...Also why I stored mine in a separate area, because I was gettin side-tracked when doing bodywork
Keep on it!

Jeff La · 10-21-2013, 10:56 PM

lotta motor in that little hole LOL ......Looks great

chad64chevy · 10-27-2013, 07:45 PM

ok, here are my doors! the passenger door can be fixed pretty easy I think compared to the drivers door! lower patch and a lil hammer and dolly work to the passenger side, the driver side will take a whole skin ( got one from a forum member awhile back) nobby I think was the member! i'm starting to think everyone in the 80's bondo everything, lol!! anyways heres the doors and a pic of the patch to fix the passenger side!

first set of pics are the driver side door

chad64chevy · 10-27-2013, 07:49 PM

passenger side pics! last two pics are the hammer and dolly work i'll have to do, not much but need some attention

Ta2Don · 10-27-2013, 09:13 PM

My Driver's Door has similar damage at the top just under the mirror mount…

Bomp · 10-28-2013, 12:25 AM

With your Skillz whats a couple of measly dented up doors?
Let the gentle massaging metal mayhem begin.

flips72 · 10-31-2013, 06:18 AM

I totally agree with bomp ..no problem. engine looks awesome, glad to see your getting some wrench time in. cant wait for more.

**TJ's Chevy** · 10-31-2013, 10:37 AM

For starters....that V8 rocks!!!! 2. Everybody that sees that truck is gonna say "WOW, That is one rare grill for a 64, I've never sen that before!" HAHAHA!!

Grill looks sweet by the way! Watching your build! Great progress and work bud!

chad64chevy · 11-03-2013, 04:12 PM

Quote:

Originally Posted by Bomp

With your Skillz whats a couple of measly dented up doors?
Let the gentle massaging metal mayhem begin.

ya, I think i'm going to get the motor running and get these doors done, I hope before the end of this yr., lol

Quote:

Originally Posted by flips72

I totally agree with bomp ..no problem. engine looks awesome, glad to see your getting some wrench time in. cant wait for more.

thanks jeff, I haven't heard from you in awhile, but anyways glad to hear from you, and thanks for the comments

Quote:

Originally Posted by T.J. MCCAULEY

For starters....that V8 rocks!!!! 2. Everybody that sees that truck is gonna say "WOW, That is one rare grill for a 64, I've never sen that before!" HAHAHA!!

Grill looks sweet by the way! Watching your build! Great progress and work bud!

thanks T.J., the 'WOW' factor on the motor was what I was going for! I seen a couple people doing the c50/60 grille, but I still have my aluminum grille that don't have any dents too! so that leaves me three options for the grille, kind of like what ever mood I'm in!!

Alan's Classic · 11-03-2013, 09:40 PM

Very nice progress!! Those are CPP motor perches right?

Ta2Don · 11-03-2013, 11:29 PM

Looking Good Chad...

chad64chevy · 11-04-2013, 09:05 PM

Quote:

Originally Posted by flips72

yeah, sorry about not being around much, computers been down, your truck is looking great, cant wait to see it finished.

ya, its ok! if my truck was done I would be driving a lot more then I am on here, lol!

Quote:

Originally Posted by Alan's Classic

Very nice progress!! Those are CPP motor perches right?

yes alan, I just drilled two holes so I can mount them in the back set of holes

Quote:

Originally Posted by Ta2Don

Looking Good Chad...

thanks don for the comment, and thanks for email those pictures from clems get together, then one with my family with the fire pit was awesome, really captured the flames and made them stand out

BOXER957 · 11-05-2013, 08:22 AM

Chad you achieved your goal! You wanted the motor to have the "Wow factor" You got it! Every time I stop by to check up on you I always scroll back to see what I've missed and I see that motor...Dang, is that thing sweet! I always liked the look of the shotgun scoop and your mix of colors just looks killer. I too am anxiously awaiting the day she comes to life.Keep on keepin on and you'll get there!

chad64chevy · 11-09-2013, 08:50 PM

this what I did today, my hydro boost lines!

Ta2Don · 11-09-2013, 09:41 PM

Very Clean...

chad64chevy · 11-09-2013, 09:45 PM

thanks don, the hoses might be clean but the frame is dirty, lol! I need to give it a bath!

chad64chevy · 11-09-2013, 10:04 PM

i'm debating on stripping the hood tomorrow or doing raptor liner in the bed, this next weekend will be to cold to do any painting or the raptor liner! the bed floor needs a lil work before doing the bed liner! looks like someone just throw stuff in the back and dented it up! we will see, I might just strip the hood and start fixing dents in the bed floor

chad64chevy · 11-10-2013, 08:09 PM

got most of the hood stripped down to bare metal then sprayed etching primer on it, I got a small section left to do! I also got the grille support panel stripped and sprayed with etching primer! lil by lil, but progress is progress!!
looks like rain here next weekend not sure what i'll get done if it rains! I wanted to spray the raptor liner in the bed, but I found a few dents in the hood that needed to be fixed! so I didn't get around to doing the bed this weekend

heres some pics for ya!! everything that green has been stripped down and coated with green etching primer

coulter · 11-10-2013, 08:15 PM

looking good man!! you are getting pretty close

chad64chevy · 11-10-2013, 08:26 PM

Quote:

Originally Posted by coulter

looking good man!! you are getting pretty close

as far as the motor goes I need: spark plugs, thermostat, oil and filter, antifreeze, battery, fuel filter! just to hear it run without the wiring harness in it, yet!! i'm hoping by the end of the month I will hear it run

Ta2Don · 11-10-2013, 09:08 PM

Quote:

Originally Posted by coulter

looking good man!! you are getting pretty close

Gotta agree with Coulter, Looking forward to seeing you and your truck at Clem's next go 'round!!!

NEWFISHER · 11-10-2013, 10:45 PM

That engine looks bad a$$ !

10-21-2013, 07:54 PM	#1
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: my '64 c-10 swb project with steel floor from a '70 this is the bracket I bent up to mount the trans dipstick off the firewall enough to fill it and be able to use it to! I also had to grind the oil dipstick down a lil to fit, got it installed too! also got my fuel pump installed! I did a lil work on the truck sunday I started to strip my driver door down then stopped when I found a lot of bondo! So I stopped and I think i'm going to look for another driver door, its going to be to much work to try and fix, I forgot to take a pic of the door and the oil dipstick installed! Attached Images __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

10-21-2013, 08:08 PM	#2
allaboutchevelles Registered User Join Date: Dec 2010 Location: sanford nc Posts: 499	Re: my '64 c-10 swb project with steel floor from a '70 motor looking good chad. nice work __________________ 69 chevelle malibu, 64 C-10 shortbed

10-21-2013, 08:55 PM	#4
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: my '64 c-10 swb project with steel floor from a '70 Dude! The motor is lookin sweet! I'm sure that you can hardly wait to hear it purrrrrr! I know how anxious that I am to hear mine fire-up, and it makes me crazy with anticipation!...So I feel your pain! It is really hard to stay focused on other items with a fresh motor staring you in the face!!!...Also why I stored mine in a separate area, because I was gettin side-tracked when doing bodywork Keep on it! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

10-21-2013, 10:56 PM	#5
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: my '64 c-10 swb project with steel floor from a '70 lotta motor in that little hole LOL ......Looks great

10-27-2013, 07:45 PM	#6
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: my '64 c-10 swb project with steel floor from a '70 ok, here are my doors! the passenger door can be fixed pretty easy I think compared to the drivers door! lower patch and a lil hammer and dolly work to the passenger side, the driver side will take a whole skin ( got one from a forum member awhile back) nobby I think was the member! i'm starting to think everyone in the 80's bondo everything, lol!! anyways heres the doors and a pic of the patch to fix the passenger side! first set of pics are the driver side door Attached Images __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

10-27-2013, 07:49 PM	#7
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: my '64 c-10 swb project with steel floor from a '70 passenger side pics! last two pics are the hammer and dolly work i'll have to do, not much but need some attention Attached Images __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

10-27-2013, 09:13 PM	#8
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: my '64 c-10 swb project with steel floor from a '70 My Driver's Door has similar damage at the top just under the mirror mount… __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

10-28-2013, 12:25 AM	#9
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: my '64 c-10 swb project with steel floor from a '70 With your Skillz whats a couple of measly dented up doors? Let the gentle massaging metal mayhem begin.

10-31-2013, 06:18 AM	#10
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: my '64 c-10 swb project with steel floor from a '70 I totally agree with bomp ..no problem. engine looks awesome, glad to see your getting some wrench time in. cant wait for more. __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

10-31-2013, 10:37 AM	#11
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: my '64 c-10 swb project with steel floor from a '70 For starters....that V8 rocks!!!! 2. Everybody that sees that truck is gonna say "WOW, That is one rare grill for a 64, I've never sen that before!" HAHAHA!! Grill looks sweet by the way! Watching your build! Great progress and work bud! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

11-03-2013, 09:40 PM	#13
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: my '64 c-10 swb project with steel floor from a '70 Very nice progress!! Those are CPP motor perches right? __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

11-03-2013, 11:29 PM	#14
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: my '64 c-10 swb project with steel floor from a '70 Looking Good Chad... __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

11-05-2013, 08:22 AM	#16
BOXER957 Registered User Join Date: Aug 2013 Location: Ma. Posts: 169	Re: my '64 c-10 swb project with steel floor from a '70 Chad you achieved your goal! You wanted the motor to have the "Wow factor" You got it! Every time I stop by to check up on you I always scroll back to see what I've missed and I see that motor...Dang, is that thing sweet! I always liked the look of the shotgun scoop and your mix of colors just looks killer. I too am anxiously awaiting the day she comes to life.Keep on keepin on and you'll get there! __________________ Nice EASY project, no problem....until I get home why is that? My build: http://67-72chevytrucks.com/vboard/s...d.php?t=595078

11-09-2013, 08:50 PM	#17
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: my '64 c-10 swb project with steel floor from a '70 this what I did today, my hydro boost lines! Attached Images __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

11-09-2013, 09:41 PM	#18
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: my '64 c-10 swb project with steel floor from a '70 Very Clean... __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD



Register or Log In To remove these advertisements.

11-09-2013, 09:45 PM	#19
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: my '64 c-10 swb project with steel floor from a '70 thanks don, the hoses might be clean but the frame is dirty, lol! I need to give it a bath! __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

11-09-2013, 10:04 PM	#20
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: my '64 c-10 swb project with steel floor from a '70 i'm debating on stripping the hood tomorrow or doing raptor liner in the bed, this next weekend will be to cold to do any painting or the raptor liner! the bed floor needs a lil work before doing the bed liner! looks like someone just throw stuff in the back and dented it up! we will see, I might just strip the hood and start fixing dents in the bed floor __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

11-10-2013, 08:09 PM	#21
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: my '64 c-10 swb project with steel floor from a '70 got most of the hood stripped down to bare metal then sprayed etching primer on it, I got a small section left to do! I also got the grille support panel stripped and sprayed with etching primer! lil by lil, but progress is progress!! looks like rain here next weekend not sure what i'll get done if it rains! I wanted to spray the raptor liner in the bed, but I found a few dents in the hood that needed to be fixed! so I didn't get around to doing the bed this weekend heres some pics for ya!! everything that green has been stripped down and coated with green etching primer Attached Images __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

11-10-2013, 08:15 PM	#22
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: my '64 c-10 swb project with steel floor from a '70 looking good man!! you are getting pretty close __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

11-10-2013, 10:45 PM	#25
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: my '64 c-10 swb project with steel floor from a '70 That engine looks bad a$$ !

Register or Log In To remove these advertisements.