D52 Caliper Rear Disc Brake Brackets - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 02-26-2017, 01:26 AM

Looks good

Thanks for posting pics.

Heetstroke · 02-26-2017, 12:04 PM

Quote:

Originally Posted by 68Stepbed

In case anyone is wondering, rockauto.com sells the Centric brand rotors, which is also branded as StopTech. Since I'll have corss drilled and slotted Wilwoods up front, i figured the rears needed to somewhat match.

What part number?

Beetle · 03-06-2017, 01:15 PM

Captain, you still make these?

**Captainfab** · 03-07-2017, 12:41 AM

I make all of my products everyday. However I am currently out of the parts for the D52 brackets. I will have more parts in about a week. Let me know and I'll make sure you get a set from the next ruin of parts.

Quote:

Originally Posted by Beetle

Captain, you still make these?

riz · 03-13-2017, 02:09 PM

First off.... nice stuff !

What is the correct part number for the Wilwood calipers? I see 120-10938 and 120-10936, the only difference I see is the bore area??? Is it the same difference between the OEM D52 calipers JD5 and JB5 ?

Also, what are the part numbers for the brake pads that go in them? If I buy a complete stainless brake line set up for disc brakes will everything connect right up with no issues?

I'm trying to put some pricing together, thanks.

RIZ

**Captainfab** · 03-13-2017, 11:23 PM

Which calipers depends on what you are running on the front. If you are going with the Wilwood dual piston D52 all around, you will want the 120-10936's with the 2.0" bores on the front and the 120-10938's with the 1.125" bores on the back. You typically want smaller pistons on the back.

riz · 03-14-2017, 07:21 AM

I will be running a McGaugheys drop spindle up front, can I use Wilwood calipers on it?

RIZ

**Captainfab** · 03-14-2017, 11:11 PM

That I do not know. That would be a question to ask McGaughey's.

Quote:

Originally Posted by riz

I will be running a McGaugheys drop spindle up front, can I use Wilwood calipers on it?

RIZ

riz · 03-15-2017, 02:01 PM

To answer my own question.... Wilwood says their D52 calipers will bolt right up to the McGaughys drop spindles from kit 93151 - 4.5 / 6 lowering kit.

RIZ

riz · 03-17-2017, 04:55 PM

Quote:

Originally Posted by Captainfab

I make all of my products everyday. However I am currently out of the parts for the D52 brackets. I will have more parts in about a week. Let me know and I'll make sure you get a set from the next ruin of parts.

Do you have a set powder coated in black ready to ship? $232 + 13.60 is what you said on page one... once you have them, I'm ready to buy.... just let me know. Thanks.

RIZ
Posted via Mobile Device

riz · 03-17-2017, 05:00 PM

Quote:

Originally Posted by riz

Do you have a set powder coated in black ready to ship? $232 + 13.60 is what you said on page one... once you have them, I'm ready to buy.... just let me know. Thanks.

RIZ
Posted via Mobile Device

I mean 232 + 13.60 + 28 for powder coated black = 273.60 😀
Posted via Mobile Device

**Captainfab** · 03-17-2017, 11:57 PM

No I do not have a powder coated set of D52 brackets. I do not have a set in bare steel yet. I am still waiting on some spacers to be cut. I was expecting them today, but they were not with the order I picked up this morning. Hopefully Monday or Tuesday. Then the powder coating will take a week to have done. When ever I have had a set powder coated in advance, they just sit here for a couple months.

Quote:

Originally Posted by riz

Do you have a set powder coated in black ready to ship? $232 + 13.60 is what you said on page one... once you have them, I'm ready to buy.... just let me know. Thanks.

RIZ
Posted via Mobile Device

Quote:

Originally Posted by riz

I mean 232 + 13.60 + 28 for powder coated black = 273.60 😀
Posted via Mobile Device

riz · 03-18-2017, 06:09 AM

Please let me know when the powder coated set is done and I will immediately make an order......... or can I order in advance? I can send payment today or tomorrow. Just let me know.

RIZ

**Captainfab** · 03-18-2017, 11:14 PM

I will send you a PM with ordering and payment info.

Quote:

Originally Posted by riz

Please let me know when the powder coated set is done and I will immediately make an order......... or can I order in advance? I can send payment today or tomorrow. Just let me know.

RIZ

riz · 03-19-2017, 11:55 AM

Quote:

Originally Posted by 68Stepbed

In case anyone is wondering, rockauto.com sells the Centric brand rotors, which is also branded as StopTech. Since I'll have corss drilled and slotted Wilwoods up front, i figured the rears needed to somewhat match.

What is the part number for these ? Are they 1.28" wide? Do they have the same rotor for a front 1" rotor with c10 bolt pattern of 5x127?
RIZ

Posted via Mobile Device

avysittinon22s · 05-09-2017, 02:52 PM

I would like to purchase a set.

Dmaxmoe · 05-09-2017, 10:11 PM

Going to order a set here soon, does anyone have a set of the eldorado parking brake calipers set up and operational? What did you use for cables and lets see the final setup. Thanks

**Captainfab** · 05-09-2017, 11:51 PM

I will send you a PM with ordering and payment info.

Edit: I see that you chose to not receive PM's here on the forum. Would you like me to contact you on your website?

Quote:

Originally Posted by avysittinon22s

I would like to purchase a set.

**Captainfab** · 05-09-2017, 11:54 PM

There is not going to be one set of cables that work for all applications. It will depend on what year truck you have and whether is is a shortbed or longbed, Chevy or GMC, etc.

Quote:

Originally Posted by Dmaxmoe

Going to order a set here soon, does anyone have a set of the eldorado parking brake calipers set up and operational? What did you use for cables and lets see the final setup. Thanks

Dmaxmoe · 05-10-2017, 09:10 AM

I hear ya on that Cap'n, mostly just like to see what guys have came up with for ideas, see maybe what has or hasn't worked kinda thing.

avysittinon22s · 05-10-2017, 12:14 PM

Quote:

Originally Posted by Captainfab

I will send you a PM with ordering and payment info.

Edit: I see that you chose to not receive PM's here on the forum. Would you like me to contact you on your website?

Too be honest I didn't know private messages could be disabled. I will try to find the settings.

avysittinon22s · 05-10-2017, 02:55 PM

Quote:

Originally Posted by Captainfab

I will send you a PM with ordering and payment info.

Edit: I see that you chose to not receive PM's here on the forum. Would you like me to contact you on your website?

Please try it again when you get a chance. Thanks

**Captainfab** · 05-10-2017, 11:24 PM

PM sent........

Quote:

Originally Posted by avysittinon22s

Please try it again when you get a chance. Thanks

Sandemonium · 06-03-2017, 01:00 AM

Interested in ordering a set of brackets for a 12 bolt rearend. Please let me know total and PayPal information for a raw set.

Thank you.

**Captainfab** · 06-03-2017, 01:04 AM

I will send you a PM with ordering and payment info.

Quote:

Originally Posted by Sandemonium

Interested in ordering a set of brackets for a 12 bolt rearend. Please let me know total and PayPal information for a raw set.

Thank you.

02-26-2017, 01:26 AM	#576
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: D52 Caliper Rear Disc Brake Brackets Looks good Thanks for posting pics. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-06-2017, 01:15 PM	#578
Beetle Registered User Join Date: May 2009 Location: Fayetteville, NC Posts: 725	Re: D52 Caliper Rear Disc Brake Brackets Captain, you still make these? __________________ Jason TEAM C10 HOT ROD POWER TOUR 689 Short Step 68 Step Trucks Sold: 70 GMC, 72 K5 Members met: Andy4639 GCncsuHD CSGAS zicc1835 hotrod farm truck Mingrao Bhelton brenthiggins

03-13-2017, 02:09 PM	#580
riz Registered User Join Date: Oct 2011 Location: hudson,wi Posts: 805	Re: D52 Caliper Rear Disc Brake Brackets First off.... nice stuff ! What is the correct part number for the Wilwood calipers? I see 120-10938 and 120-10936, the only difference I see is the bore area??? Is it the same difference between the OEM D52 calipers JD5 and JB5 ? Also, what are the part numbers for the brake pads that go in them? If I buy a complete stainless brake line set up for disc brakes will everything connect right up with no issues? I'm trying to put some pricing together, thanks. RIZ

03-13-2017, 11:23 PM	#581
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: D52 Caliper Rear Disc Brake Brackets Which calipers depends on what you are running on the front. If you are going with the Wilwood dual piston D52 all around, you will want the 120-10936's with the 2.0" bores on the front and the 120-10938's with the 1.125" bores on the back. You typically want smaller pistons on the back. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-14-2017, 07:21 AM	#582
riz Registered User Join Date: Oct 2011 Location: hudson,wi Posts: 805	Re: D52 Caliper Rear Disc Brake Brackets I will be running a McGaugheys drop spindle up front, can I use Wilwood calipers on it? RIZ

03-15-2017, 02:01 PM	#584
riz Registered User Join Date: Oct 2011 Location: hudson,wi Posts: 805	Re: D52 Caliper Rear Disc Brake Brackets To answer my own question.... Wilwood says their D52 calipers will bolt right up to the McGaughys drop spindles from kit 93151 - 4.5 / 6 lowering kit. RIZ

03-18-2017, 06:09 AM	#588
riz Registered User Join Date: Oct 2011 Location: hudson,wi Posts: 805	Re: D52 Caliper Rear Disc Brake Brackets Please let me know when the powder coated set is done and I will immediately make an order......... or can I order in advance? I can send payment today or tomorrow. Just let me know. RIZ

05-09-2017, 02:52 PM	#591
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	Re: D52 Caliper Rear Disc Brake Brackets I would like to purchase a set.

05-09-2017, 10:11 PM	#592
Dmaxmoe Registered User Join Date: Apr 2017 Location: Calgary, Alberta Posts: 22	Re: D52 Caliper Rear Disc Brake Brackets Going to order a set here soon, does anyone have a set of the eldorado parking brake calipers set up and operational? What did you use for cables and lets see the final setup. Thanks

05-10-2017, 09:10 AM	#595
Dmaxmoe Registered User Join Date: Apr 2017 Location: Calgary, Alberta Posts: 22	Re: D52 Caliper Rear Disc Brake Brackets I hear ya on that Cap'n, mostly just like to see what guys have came up with for ideas, see maybe what has or hasn't worked kinda thing.

06-03-2017, 01:00 AM	#599
Sandemonium Proud owner of a 55.1 AD Join Date: Oct 2006 Location: Desert Hills, AZ Posts: 460	Re: D52 Caliper Rear Disc Brake Brackets Interested in ordering a set of brackets for a 12 bolt rearend. Please let me know total and PayPal information for a raw set. Thank you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.