![]() |
![]() |
#576 |
Registered User
Join Date: Dec 2012
Location: Manitoba
Posts: 644
|
Re: Rat repair.
Easier with the fenders off IMO. Replace pins and bushings. Scribe marks around hinges for quick guide on reassembly.
|
![]() |
![]() |
![]() |
#577 | |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Quote:
![]()
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
![]() |
![]() |
![]() |
#578 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Mind if i say i'm a little frustrated? Summit messed up my street number when i placed my exhaust manifold order so they couldn't deliver it on Monday, i get it straightened out and its delivered today.
When i placed the order on the phone i told the guy i wanted replacement corvette exhaust manifolds with the 2 1/2" collector, he does some research and says i need part number 674-501 so i place the order on his word. I open the box after work and.... 2" collector diameter... sigh. Anybody have a stock 72 350 exhaust manifold laying around that they can tell me if 2" is stock diameter for the collector? I figured they would be at least 2 1/4" Guesstimating i'm pushing about 325-350 HP, should i stick with these or get something else?
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#579 |
Registered User
Join Date: Sep 2013
Location: Mount Morris,NY
Posts: 788
|
Re: Rat repair.
ugh...i hate when that happens, hope you get it sorted out
__________________
Dean 1972 Custom Camper c/20 5.3 LS swap in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=610187 in God we Trust ![]() |
![]() |
![]() |
![]() |
#580 |
Registered User
Join Date: Aug 2013
Location: San Jose Ca
Posts: 965
|
Re: Rat repair.
I checked the part number674-501 at Summit and they don't list the exhaust port sizes for it. it's bummer that you have to deal with sending them back. Check out part number 674-504 they call out 2-1/2" exist
|
![]() |
![]() |
![]() |
#581 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Thanks guys,
674-501 was what i ordered thru Summit via the phone call, it ended up being a 2" collector. I ordered 674-503 and 674-504. Its been dumping rain here again and i'm gonna be working again (2nd in a row) this weekend, not a whole lot to do but clean the garage, don't wanna move forward on body work until i get the exhaust done and take the truck back to the trans shop for the checkup.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#582 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
The day has arrived, after spending time talking to a number of muffler shops getting price quotes and listening to recommendations and deciding if i trust the person or not ect, i finally settled on a shop and a system and took my truck and the new manifolds there this morning, he said one day but i told him that if he needed 2 days not to worry about it. being as they were willing to take me home and come and get me.
One thing i can tell you, that Eastwood manifold paint i bought..... Never again, its a really light grey, looks nothing like cast iron. I almost took them to a local sand blaster to remove the stuff.. LOL! Anyway i cant wait to be able to hear again while driving this truck, it will make driving it fun again.. ![]()
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#583 |
Senior Member
![]() Join Date: May 2003
Location: Sandown, NH
Posts: 2,819
|
Re: Rat repair.
I recently did some shoping around for exhaust also, and found a guy close to me that had a good price and he came highly recommended. After speaking to him I decided he would be the one. But he said he wanted anything and everything on the truck that could possibly interfer with the exhaust, so I have a little more to do before I'm ready. Shift linkage, emergency brake cables at least.
Can't wait to hear your sound clip.... What are you using for mufflers and pipe size ? Gary
__________________
Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 |
![]() |
![]() |
![]() |
#584 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Well, i was adamant about wanting Corvette manifolds on my truck, i wanted that 2 1/2" collector, in my search i found a thread and a truck like mine using corvette manifolds, i emailed and verified part numbers and ordered the manifolds, when they got here i ground off the mounting flanges for accessory's (alt ect.) that weren't needed then painted with the Eastwood paint, dropped my truck off at the shop. The next morning i get a phone call message, there is a problem please call. I just drove there because i was heading that way anyway, he says the manifolds are on but there too tight to the starter and cross member, so i go down there and he's right, to add the flair and a minimum 2 bends to clear the started would require cutting small wedges out of the pipe like old school 2 stroke motorcycle exhaust pipes, piecing and welding it together.
So he recommends getting the stock replacement manifolds that have the correct angles, a 45 degree back and kicked out to clear the starter, i'm pretty disappointed but don't want to hold up the space in his shop any longer than necessary so i give him the go ahead to order the manifolds and some more high temp paint to keep the job moving, at added cost to me of course! The original plan was to run 2 1/5 pipe to the mufflers then run 2 1/4 on the tail pipes to allow good air flow and clearance between the tail pipe, fuel cell and rear springs, but after the manifold change we stuck with 2 1/4 for the whole system. The mufflers are the largest Magnaflow cans you can get, 24" long party # 12286. Its nice and quiet now! i get a nice tone out the back when i get on it but regular driving is nice and quiet, now i can hear the engine. I cant really notice any seat of the pants difference on acceleration from a dead stop, at freeway speeds it may not rev quite as fast but not really too noticable with the new exhaust as opposed to the Headers and 2 1/2" pipe. But more importantly now i can run a compression test and try to isolate the miss i have not been able to dial out with electrical and carb tuning, the build was done around 95.. If somebody can tell me how to attach a video i'll post it, my phone made it in an mp4 format.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#585 |
Registered User
![]() Join Date: Nov 2007
Location: baltimore, maryland
Posts: 617
|
Re: Rat repair.
That sucks to say the least. Nothin worst then dumping money on something only to find out at the finish line, it's all for not. I posted my video to YouTube and just put the link in my post. I tried imbeddingvthe video in my post with no luck.
__________________
Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission! ![]() |
![]() |
![]() |
![]() |
#586 |
Registered User
Join Date: Aug 2013
Location: San Jose Ca
Posts: 965
|
Re: Rat repair.
That's major bummer about the manifolds. I have bought 3 sets of headers to find some that fit with minimal cutting on the frame do to the engine mount I chose.
|
![]() |
![]() |
![]() |
#587 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Ok, here's the video link, now remember that i have had this truck so loud for so long that i wanted quiet, you may want a louder truck but my ears say no more.. at 2' (camera/video distance) it sounds loud like in the video, but stand 5' away and its fairly quiet
https://www.youtube.com/watch?v=wH4Qq3m7PPo https://www.youtube.com/watch?v=ZyYm...ature=youtu.be Your going to notice another squeaking noise in the video, looks like i need to replace the front main seal again, its present at idle but any higher RPM and it stops making the noise, funny thing is its not leaking. last time i had that sound i was stumped, then one day a lady pulled up next to me in her truck and complimented me on mine, she also had a 67-72 but not a K20, she said " do you know what that noise is? i said no to be honest, she said it was the front main seal dried out, when you gas it the oil flow increases and it wets the seal better, then at idle when the oil pressure drops it starts squeaking again.. then she drove away. I decided to check into it and my front main was bad but not leaking badly altho the rubber was cracked in a couple places on the outer lip, so i replaced it and had to install a speedy sleeve on the crank with a matching seal.. I suspect ether it drys out from not being a DD or the cheapo timing cover could be off center just a tad? I do want to open the engine back up and do a few things to it but have been putting it off. ![]()
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's Last edited by swamp rat; 10-07-2014 at 04:39 AM. |
![]() |
![]() |
![]() |
#588 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
I added another video above.
While on the lift it became apparent that my rebuilt tranny has a couple leaks and my resealed transfer case also leaks as well, i'm due for my 600 mile followup so it will be interesting to see if this company backs up there work or try's to give me the run around.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#589 |
Registered User
![]() Join Date: Jul 2012
Location: Ladysmith, WI
Posts: 641
|
Re: Rat repair.
Geez, Rat, this page is depressing...
But, I'm sure you'll persevere. Seems like most of this stuff should be easier, doesn't it? Good luck with the leaks and the miss. I'm looking forward to Mustard being significantly quieter when I get done, too. I wouldn't even mind replacing the exhaust system on the 87 K20 diesel, too, but can't come to grips with putting that kind of money into that one.......yet........ Keep it up! ![]()
__________________
Nick Old Mustard, 1972 Chevy C20, 350, TH350, 4.10 Dana 60 rear, owned since I was 16 in 1986 http://67-72chevytrucks.com/vboard/s...d.php?t=545356 Blue Bell, 1987 K20, 6.2L Diesel, TH400/NP208, 4.10 gears Ustahav 1976 K10, 350/350/203, Gov Loc, Yooper beater trail truck. |
![]() |
![]() |
![]() |
#590 | |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Quote:
![]() I do need to take my truck to the tranny place soon, I stopped and talked to them today. I also got a price quote to blast and powder coat my rear bumper. Per the engine miss, its really mild, don't feel it at all when driving, just hear it at idle. Haven't pulled the compression test yet, been kinda busy. want to buy a leak down tester too. Per the front main seal i had planned on just waiting till the front clip is off to deal with that, have been debating on just pulling the engine so as to pull the oil pan and change the timing cover back to the stock cover, I'm sure if i just drop the pan in the front to change the timing cover I'll just create more leaks.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
![]() |
![]() |
![]() |
#591 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Ok time for some updates, yes i'm still alive
![]() Took the truck back to the tranny shop and they replaced the pan gasket, i haven't crawled back under the truck since then to look at it, lets hope its not leaking. I got the rear bumper blasted and powder coated, its pretty obvious that it is a used old bumper as the powder coat shows up every flaw possible, but i figured it would, i'm still pretty happy with it. I got my seat finished as well with the exception of putting together the missing pieces on the seat tracks, The custom shop that moved in just down the road from me has an upholstery section run by his wife, she did a great job! Not to mention it cost less than the last place i went too. I'm still gonna have to steal parts off my stock seat tracks to put on this one, in case you don't know my stock seat is a spring/2" foam, the frame that i bought new foam and a cover for is a deep foam seat, its pretty comfortable if i do say so myself. ![]() Finally took the time to pull a compression check on my 19 year old engine, pulled one plug at a time, turned the engine about 5 compression strokes to top out the gauge. Not too bad but could be better. Changed out my plugs again to standard length NGK's gaped at .040 (Mallory Unilite Distributor and Promaster coil) I found that number 1 plug was not tight, i know i tightened it when i put in the other plugs I don't miss that kinda stuff so i think the muffler shop probably removed them when they did the manifolds and missed one. It runs better and not missing like it was, the engine still could be a little smoother at idle, you can feel it just by putting your hand on the truck, ran out of time to see if i could dial it out with the carb, another day. Something i have noticed is the engine at idle will occasionally come up about 30-50 RPM then slow back down this happens about once every 45 seconds to 2 minutes, and lasts about 30 seconds. I wish my ears were better so i could listen to the engine a bit better. Thats what happens when you are around loud stuff all your life. Compression numbers below, any engine guys wanna tell me if these numbers are within that percentage of variance that's allowable? 2)170 4)175 6)170 8)175 1)175 3)165 5)170 7)180 I guess pretty soon now i'm gonna have to think about starting some body work. I just don't know if i trust the blast shop that's close to me (they did my bumper) with my doors.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#592 | |
Registered User
Join Date: Feb 2007
Location: Marana, Arizona
Posts: 3,416
|
Re: Rat repair.
Quote:
Your seat looks great, what shop?
__________________
"I feel the need for speed!"... as soon as I am done with my nap. |
|
![]() |
![]() |
![]() |
#593 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: Rat repair.
very nice. i like the black/dark green combo. the seat looks great as well!
|
![]() |
![]() |
![]() |
#594 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,378
|
Re: Rat repair.
Nice!
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
#595 | |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Quote:
Its in the same building as Perfection Powdercoating but i cant remember the business name off hand its the place that does car restorations, I'm half tempted to drive my truck there and give him the keys after seeing what he does, top notch show cars! but i'm not looking for a show truck with this truck, well maybe not just yet.. Perfection's addy is 5402 184th ST E, Suite D Puyallup WA, 98375 EDIT: Canyon Road and 184th st.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
![]() |
![]() |
![]() |
#596 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Ya know Ryan under that dark green paint is the same Medium green you have, my uncle scuffed and painted the truck about 25 years ago, i'm seriously thinking about trying to rub the gark green and primer off and seeing if i can put a buff on the old paint, if course the doors and rockers still need replaced then the whole thing painted again.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's Last edited by swamp rat; 11-13-2014 at 11:59 PM. |
![]() |
![]() |
![]() |
#597 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Thanks Deadhead, its got a long ways to go to catch up to your beautiful truck!
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#598 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: Rat repair.
I like the seat it looks nice and clean. keep the good work George
__________________
Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper |
![]() |
![]() |
![]() |
#599 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Thanks George.
Thought i'd post a closeup of the seat cover.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#600 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Rat repair.
Nothing great to report today
Well my garage had become a disaster area so i figured i'd clean it this weekend, i spent 5 hours out there today and put a dent in about 1/3rd of it.... back at it tomorrow. I didn't notice it when i pulled the plugs the other day but that muffler shop did in fact break one of the plugs, replaced it with a new standard length champion plug. That along with all the stubbie Accel plugs i was using with the headers.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
Bookmarks |
|
|