![]() |
![]() |
#576 |
low n' slo
![]() Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,164
|
Re: 67-72 Electric speedo
heres what i got which should be about done...but id like to add a few things to update this. its very time consuming and trial and error but i love the stock finished look. i ran an 80s camaro tach in mine along with the battery gauge guts in the ammeter face...so its a little different.
to get the factory paint off the lens...use Purple Power. it dissolves it VERY easy. be very careful with it and dont let it run to the other printed areas. the green paint i found was at Hobby Lobby. it comes in a little small spray can and it matches VERY well imo. i did 3 coats and it came out nice. i found a 2 wire light socket on amazon that fits pretty good. the base is rubber and does have 4 locking tabs but they fit very nice. if you need to add holes...go just UNDER 5/8" on the hole (i used a drill step bit). all the 5/8 will make it a little loose which is why you see the silicone on one of them. i havent plugged this in to check on the truck yet so cant comment on that yet (truck isnt even running yet) for the fuel gauge...i cut out the stock red lens for the oil and temp lights. instead, i cut the high beam and service engine plastics off the old s10 gauge. cut to fit, then mask off and paint over the words not being used or that will show..then you can glue them to the fuel gauge. gives you a stock-ish way to get a high beam indicator and SES light without drilling into anything
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread ![]() -_--_--_ _________ _--_-_ -/____|__|__\__ ,.,,,.,.,,.,|_O _______ O_] Last edited by kev2809; 08-05-2022 at 03:08 PM. |
![]() |
![]() |
![]() |
#577 |
low n' slo
![]() Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,164
|
Re: 67-72 Electric speedo
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread ![]() -_--_--_ _________ _--_-_ -/____|__|__\__ ,.,,,.,.,,.,|_O _______ O_] |
![]() |
![]() |
![]() |
#578 |
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: 67-72 Electric speedo
Looks good! Nice find on the paint, that makes it easier.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
![]() |
![]() |
![]() |
#579 |
Registered User
![]() Join Date: Sep 2013
Location: Sioux Center IA
Posts: 184
|
Re: 67-72 Electric speedo
Eric I wold like to order a set of decals. Do you still have?
|
![]() |
![]() |
![]() |
#580 |
Registered User
Join Date: Aug 2016
Location: El Cajon, CA
Posts: 274
|
Re: 67-72 Electric speedo
Bringing this back up as I am interested in a set of the decals also.
|
![]() |
![]() |
![]() |
#581 | |
Registered User
Join Date: Mar 2015
Location: Utah
Posts: 750
|
Re: 67-72 Electric speedo
Quote:
__________________
72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab |
|
![]() |
![]() |
![]() |
#582 |
low n' slo
![]() Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,164
|
Re: 67-72 Electric speedo
like the actual lens? i cut them off the original gauge and glued the ones from the s-10 on. or are you talking how do they light up?
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread ![]() -_--_--_ _________ _--_-_ -/____|__|__\__ ,.,,,.,.,,.,|_O _______ O_] |
![]() |
![]() |
![]() |
#583 |
Registered User
Join Date: Mar 2015
Location: Utah
Posts: 750
|
Re: 67-72 Electric speedo
Sorry for the vague question. I was mainly asking how you glued them down. Also, how did you get the old ones off without ruining the gauge?
__________________
72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab |
![]() |
![]() |
![]() |
#584 |
low n' slo
![]() Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,164
|
Re: 67-72 Electric speedo
if i remember correctly that red film just pulls right off leaving the holes blank. then, you cut the s10 gauges to fit over them and leave enough to cover the holes. i used super glue to fix them back to the gauges. hope this helps!
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread ![]() -_--_--_ _________ _--_-_ -/____|__|__\__ ,.,,,.,.,,.,|_O _______ O_] |
![]() |
![]() |
![]() |
#585 |
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,560
|
Re: 67-72 Electric speedo
I am having trouble finding 18–20-gauge sheet metal in my area. Would 22-gauge aluminum work ok?
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
![]() |
![]() |
![]() |
#586 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: 67-72 Electric speedo
Personally I think .027" thick aluminum is too thin and flimsy.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#587 |
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,560
|
Re: 67-72 Electric speedo
So I went cheap and bought a small cooking sheet from Wally World for $7. It felt pretty sturdy so I cut my piece out of that. It's aluminum but I think it should work and is easy to work with so far.
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
![]() |
![]() |
![]() |
#588 |
Registered User
Join Date: May 2015
Location: Stockdale Texas
Posts: 12
|
Re: 67-72 Electric speedo
I'm interested in a couple of sets of the decals/kits.
__________________
1950 Chevy 3100 Pontiac 350, TH350, Chevelle subframe... 1969 Chevy C/10 350, TH350 family owned since new 1996 Camaro Z28/SS #884 LT4 top end, M6, T-Tops... the project 2012 Camaro ZL1 #608 Stock LSA, M6 the Beast 2008 Chevy 2500HD LTZ Z71 CC/LB, 6.6L, Tuned w/ EFILive... |
![]() |
![]() |
![]() |
#589 |
Senior Member
![]() Join Date: Dec 1999
Location: Southern California
Posts: 2,805
|
Re: 67-72 Electric speedo
If wanting a stock type check engine light in the dash cluster for an LS swap. Acquire a gas gauge from a 40 series + truck with a diesel engine. IIRC the light up position on bottom right of gauge says "engine" Have a cluster with an air pressure gauge to use in my truck and it has this gas gauge. Been a long time since I have looked at it. Maybe different but was appropriate, just remember I am going to use this as an SES light on my truck.
__________________
Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 Last edited by Richard; 05-10-2024 at 02:48 AM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|