How about some pics of Static dropped 60-66 - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DMO · 04-05-2014, 05:13 PM

I love the stance of your truck. I just purchased a 66. It's my first project. I have a couple questions I was hoping you might answer for me. I want to drop the front 2 in the front. is yours a 3 or 4" drop in the back?

Thanks for the help!

Red65C10 · 04-06-2014, 10:09 PM

Quote:

Originally Posted by ultrahd4me

My 62 with torsion bars lowered to the max, 5" CPP rear springs, CPP adjustable trac bar & new shocks.

Ultra - What size rear wheel and tire ?

Thanks,

Red65C10 · 04-06-2014, 10:19 PM

My 60Five
ECE- 2.5 Spindles
CPP- 2" springs
CPP- 5" rear springs

Name: image.jpg
Views: 5472
Size: 57.3 KB

junk4cash · 04-07-2014, 11:09 PM

4" CPP springs out back and for the life of me I can't remember what I went with up front. Thinking 2" but not sure. I wish I knew so I could order lowered shocks. Anyone happen to know the stock height of the front end on a 66?

rickywideglide · 04-12-2014, 10:16 PM

not sure what front springs were maybe 3 inch they are ground force,rear are belltech 5 inch drop, gonna need to trim bumpstops about 1/4 inch gap up front and none in rear pretty happy with results before and after pics Name: 016.jpg
Views: 4610
Size: 52.6 KB

ChrisDollins · 04-14-2014, 11:17 PM

Quote:

Originally Posted by Red65C10

My 60Five
ECE- 2.5 Spindles
CPP- 2" springs
CPP- 5" rear springs

Great looking truck! What size tires?

Chris

Red65C10 · 04-15-2014, 07:50 AM

Quote:

Originally Posted by ChrisDollins

Great looking truck! What size tires?

Chris

Thanks, 255/70/15 on all 4.

RatRide · 04-15-2014, 11:00 AM

Quote:

Originally Posted by junk4cash

4" CPP springs out back and for the life of me I can't remember what I went with up front. Thinking 2" but not sure. I wish I knew so I could order lowered shocks. Anyone happen to know the stock height of the front end on a 66?

It looks like you still have a good amount of tire gap between the front fender. I would say it's a 2" drop coil. With companies like CCP, they have a generic lowered shock for all their kits. A shock for a 2" drop coil and a 3" drop coil is going to be the same.

WCHLVR · 04-16-2014, 02:16 PM

A little before and after-

tjabv2 · 04-16-2014, 05:03 PM

Quote:

Originally Posted by WCHLVR

A little before and after-

Great looking stance! What are the dropped specs?

Tim

WCHLVR · 04-17-2014, 02:09 AM

Quote:

Originally Posted by tjabv2

Great looking stance! What are the dropped specs?

Tim

Hey thanks! No idea what the total is. It sits on trimmed drop springs up front and cut stockers with 2" blocks out back. Removed the bump stops and mounts both front and rear. Relocated the shocks up front. Pie cut the control arms. Mild C notch in the rear.

Its pretty much maxed out. I think I am going hunt for a set of Jeep springs for the rear. The rear is very "buck board-ish" right now. Front is good.

tjabv2 · 04-17-2014, 06:31 AM

Quote:

Originally Posted by WCHLVR

Hey thanks! No idea what the total is. It sits on trimmed drop springs up front and cut stockers with 2" blocks out back. Removed the bump stops and mounts both front and rear. Relocated the shocks up front. Pie cut the control arms. Mild C notch in the rear.

Its pretty much maxed out. I think I am going hunt for a set of Jeep springs for the rear. The rear is very "buck board-ish" right now. Front is good.

thanks....I like it

glos55 · 04-17-2014, 10:38 AM

Quote:

Originally Posted by Red65C10

My 60Five
ECE- 2.5 Spindles
CPP- 2" springs
CPP- 5" rear springs

Attachment 1238520

Awesome!!! You have nailed the look! Nice job!!!

Rannos · 04-18-2014, 12:12 PM

Finally got the stance where I want it. Jeep springs and 2" blocks in rear ece 2.5 spindles and factory springs in front.

rickylucy · 04-21-2014, 11:11 AM

CPP 5 inch springs in the rear- 3 inch springs with 2.5 inch spindles in the front.

Red65C10 · 04-21-2014, 11:44 AM

Quote:

Originally Posted by glos55

Awesome!!! You have nailed the look! Nice job!!!

Thanks Man !

derail · 04-21-2014, 09:11 PM

Quote:

Originally Posted by rickylucy

CPP 5 inch springs in the rear- 3 inch springs with 2.5 inch spindles in the front.

Now that is a great looking truck!

likaroc13 · 04-21-2014, 09:54 PM

Quote:

Originally Posted by derail

Now that is a great looking truck!

x2, nice truck!...stance looks great as well.

Mikes66ChevyC10 · 04-23-2014, 09:14 AM

Quote:

Originally Posted by rickylucy

CPP 5 inch springs in the rear- 3 inch springs with 2.5 inch spindles in the front.

Truck is PERFECT!!! Love it!! Exactly how I want mine to sit!

junk4cash · 04-24-2014, 11:16 PM

Quote:

Originally Posted by junk4cash

4" CPP springs out back and for the life of me I can't remember what I went with up front. Thinking 2" but not sure. I wish I knew so I could order lowered shocks. Anyone happen to know the stock height of the front end on a 66?

I need to lose that gap in the front. Will 3" springs do that? Thanx!

Dirtkid93 · 04-25-2014, 01:34 AM

digging the stitching on your bench, looks clean and ties the truck together

Grizz1963 · 04-29-2014, 07:22 AM

Some great stance and lowering here.

I have a '66 Short Fleetside which has been lowered with heated cools etc a long time ago. THREAD HERE: http://67-72chevytrucks.com/vboard/s...d.php?t=585901
The truck behaves like a rubber duck on water when doing the bends.

It is fitted with a 350/3 speed auto combo that obviously influences ride height a bit.

I am looking at replacing the shocks and springs when I repaint and strip down the truck.

Brothers currently has 50% off on the lot.

My truck parked up in the garage shows these measurements to the underside of the fenders.

Front 27 1/4
Rear 26 1/2 on passenger side
26 on driver side

Does anyone have the stock standard measurements for these truck front and rear please??

Slow Build · 04-29-2014, 04:10 PM

Quote:

Originally Posted by Grizz1963

Front 27 1/4
Rear 26 1/2 on passenger side
26 on driver side

Does anyone have the stock standard measurements for these truck front and rear please??

The measurement from the fender lip to the center of the hub would be a better way to measure. Otherwise you have to take the tire size in to consideration. That being said I don't know the stock measurement.

**Palf70Step** · 05-03-2014, 08:42 AM

Here is mine

64 with ECE 4.5/6 dropp kit

245/60x15 on front and 275/60x15 on rear
Wheels are 15x8 Eagle Alloys

Rosko · 05-03-2014, 06:42 PM

This is my '65.

4" LMC coils and lowering shocks on the rear.
2" drop spindles and lowering shocks on the front with cut coils.

I would like to get a bit of a reversed steel rim going for the rear wheels.
Any suggestion where to go to get the widest, deepest that will fit with a set up like this?

Any help would be appreciated

04-05-2014, 05:13 PM	#576
DMO Registered User Join Date: Apr 2014 Location: Denver CO Posts: 26	Re: How about some pics of Static dropped 60-66 I love the stance of your truck. I just purchased a 66. It's my first project. I have a couple questions I was hoping you might answer for me. I want to drop the front 2 in the front. is yours a 3 or 4" drop in the back? Thanks for the help!

04-06-2014, 10:19 PM	#578
Red65C10 Registered User Join Date: Mar 2011 Location: Cumming GA Posts: 202	Re: How about some pics of Static dropped 60-66 My 60Five ECE- 2.5 Spindles CPP- 2" springs CPP- 5" rear springs __________________ Billy 65 C10 ............................... ____ ................ ________-\|___\____ .;.;;.:;:;.,;.\|__(O)___\|____/_(O)\| _______________________________ P.S. Send truck money !

04-07-2014, 11:09 PM	#579
junk4cash Registered User Join Date: Dec 2011 Location: Kansas City, Mo Posts: 160	Re: How about some pics of Static dropped 60-66 4" CPP springs out back and for the life of me I can't remember what I went with up front. Thinking 2" but not sure. I wish I knew so I could order lowered shocks. Anyone happen to know the stock height of the front end on a 66?

04-12-2014, 10:16 PM	#580
rickywideglide Registered User Join Date: Jun 2013 Location: mechanicsville,md Posts: 360	Re: How about some pics of Static dropped 60-66 not sure what front springs were maybe 3 inch they are ground force,rear are belltech 5 inch drop, gonna need to trim bumpstops about 1/4 inch gap up front and none in rear pretty happy with results before and after pics

04-16-2014, 02:16 PM	#584
WCHLVR Registered User Join Date: Apr 2013 Location: Bend, Oregon Posts: 126	Re: How about some pics of Static dropped 60-66 A little before and after-

04-18-2014, 12:12 PM	#589
Rannos Registered User Join Date: Feb 2010 Location: New Caney, Texas Posts: 356	Re: How about some pics of Static dropped 60-66 Finally got the stance where I want it. Jeep springs and 2" blocks in rear ece 2.5 spindles and factory springs in front. Attached Images

04-21-2014, 11:11 AM	#590
rickylucy Registered User Join Date: Sep 2013 Location: Long Beach, CA Posts: 23	Re: How about some pics of Static dropped 60-66 CPP 5 inch springs in the rear- 3 inch springs with 2.5 inch spindles in the front. Attached Images

04-25-2014, 01:34 AM	#596
Dirtkid93 Registered User Join Date: Apr 2014 Location: Las Vegas nevada Posts: 32	Re: How about some pics of Static dropped 60-66 digging the stitching on your bench, looks clean and ties the truck together

04-29-2014, 07:22 AM	#597
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,565	Re: How about some pics of Static dropped 60-66 Some great stance and lowering here. I have a '66 Short Fleetside which has been lowered with heated cools etc a long time ago. THREAD HERE: http://67-72chevytrucks.com/vboard/s...d.php?t=585901 The truck behaves like a rubber duck on water when doing the bends. It is fitted with a 350/3 speed auto combo that obviously influences ride height a bit. I am looking at replacing the shocks and springs when I repaint and strip down the truck. Brothers currently has 50% off on the lot. My truck parked up in the garage shows these measurements to the underside of the fenders. Front 27 1/4 Rear 26 1/2 on passenger side 26 on driver side Does anyone have the stock standard measurements for these truck front and rear please?? __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

05-03-2014, 08:42 AM	#599
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,108	Re: How about some pics of Static dropped 60-66 Here is mine 64 with ECE 4.5/6 dropp kit 245/60x15 on front and 275/60x15 on rear Wheels are 15x8 Eagle Alloys Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-03-2014, 06:42 PM	#600
Rosko Registered User Join Date: Dec 2013 Location: sierra Vista , AZ Posts: 5	Re: How about some pics of Static dropped 60-66 This is my '65. 4" LMC coils and lowering shocks on the rear. 2" drop spindles and lowering shocks on the front with cut coils. I would like to get a bit of a reversed steel rim going for the rear wheels. Any suggestion where to go to get the widest, deepest that will fit with a set up like this? Any help would be appreciated Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.