My Crew Cab Short Bed Project, AKA "Project Destiny" - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Stitch* · 06-28-2010, 11:11 PM

Getting it running is definitely in the plans. I'm off the whole week after july 4th so well see how much I can get done. Once I get the airbox swapped out for A/C airbox I'll be ready to drop the motor in. I also gotta get the TBI harness swapped out. Learned yesterday that the old tbi caught on fire in this truck so there's a couple connectors that were on the throttle body that got burned up. No worries though I have another harness

joe231 · 06-28-2010, 11:22 PM

Cool man!
I guess you know the firewalls are different between A/C and non A/C cabs. I ran into the PO's hack job on this truck so I cut out the airbox area from my donor 'burb. Also the drivers side upper kick panel has a hole for the fresh air vent that you will need to cover....

*Stitch* · 06-28-2010, 11:40 PM

Yeah thanks for the info. I have some of the stuff left over from my dads trick that I'm gonna use. I think I'm gonna just hack my firewall unless I can find a ac firewall section I can get quickly. Also I have the whole ac system inside and out for it. If for some reason I keep it I'll have to have ac in there for my wife to drive it. Period lol

joe231 · 06-28-2010, 11:45 PM

Yeah, a/c was a must for is too

*87 chevy silverado* · 06-29-2010, 02:59 AM

Quote:

Originally Posted by Fat Hoe

Yeah thanks for the info. I have some of the stuff left over from my dads trick that I'm gonna use. I think I'm gonna just hack my firewall unless I can find a ac firewall section I can get quickly. Also I have the whole ac system inside and out for it. If for some reason I keep it I'll have to have ac in there for my wife to drive it. Period lol

pull a part? : )

JohnC · 06-29-2010, 08:23 AM

Quote:

Originally Posted by RandyP

I was not going to say a word. But... if you're gonna be a bear, be a GRIZZLY BEAR!!!!!

My daughter's softball coach said that same quote all the time.

So how is the dash coming along? I would imagine with the heat we've had lately it's literally been a sweat shop operation you have going on.

*BGRAFX* · 07-05-2010, 12:37 AM

Happy 4th man! Did u blow anything up or work on the crew any?

joe231 · 07-05-2010, 12:41 AM

Happy 4th to everyone here as well!!!!!!!!!!!!

Quote:

Originally Posted by JohnC

My daughter's softball coach said that same quote all the time.

So how is the dash coming along? I would imagine with the heat we've had lately it's literally been a sweat shop operation you have going on.

Quote:

Originally Posted by BGRAFX

Happy 4th man! Did u blow anything up or work on the crew any?

I did some stuff to the '80 trying to get it more presentable.
and the wife worked on covering my dash....not a lot but...
I sealed the deal on some wheels for the crew also, going to get them next weekend...keep your fingers crossed and wish me luck

scotts62 · 07-05-2010, 12:42 AM

Heck yeah!! Good luck, again..

joe231 · 07-05-2010, 01:20 AM

thanks!!
Oh and this time the truck isn't involved.....

scotts62 · 07-05-2010, 11:22 AM

Well even better!

baclay9 · 07-05-2010, 11:28 AM

What wheels are you getting Joe?

joe231 · 07-05-2010, 11:49 AM

Quote:

Originally Posted by baclay9

What wheels are you getting Joe?

Boss 338's in gray.

scotts62 · 07-05-2010, 12:11 PM

TimE · 07-05-2010, 12:14 PM

Those will look nice Joe.

baclay9 · 07-05-2010, 12:25 PM

NICE

Are you going to have those on by next weekend? I would love to see a set in person.

joe231 · 07-05-2010, 02:10 PM

Scott, thanks
those are exactly the wheels I'm getting, looks like the same size too

Thanks Tim!

Brandon,
I'm getting them Saturday
Dunno if I'll have them on by Sunday...

texasfunk · 07-05-2010, 02:19 PM

Quote:

Originally Posted by joe231

thanks!!
Oh and this time the truck isn't involved.....

unfortunately

about time you got some wheels joe!!

*BGRAFX* · 07-05-2010, 03:02 PM

You know you will have them on 10min after you get them on saturday.

joe231 · 07-05-2010, 05:04 PM

Quote:

Originally Posted by texasfunk

unfortunately

about time you got some wheels joe!!

I wish it were!
I could use the parking space.....
Thanks Thomas!!!

Quote:

Originally Posted by BGRAFX

You know you will have them on 10min after you get them on saturday.

dunno, I'm gonna have to do some grinding and need my wider rear diff, unless I can talk some one out of some spacers

not to mention the 12 hour road trip....

RandyP · 07-05-2010, 05:06 PM

Grinding? Spacers? How much more would wheels cost that fit?

joe231 · 07-05-2010, 05:07 PM

LOTS!!!

I'm swapping a 88-98 rear end into the crew in the next couple weeks.....spacers would be temporary

mcbassin · 07-05-2010, 05:14 PM

Glad to hear you nailed down some wheels!

joe231 · 07-05-2010, 05:17 PM

Quote:

Originally Posted by mcbassin

Glad to hear you nailed down some wheels!

Thanks Mike!
I have loved the 338's every since I saw them on here

*BGRAFX* · 07-05-2010, 05:38 PM

12hour road trip??? You know there are guys in big brown trucks that deliver wheels to your door.

06-28-2010, 11:11 PM	#576
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Getting it running is definitely in the plans. I'm off the whole week after july 4th so well see how much I can get done. Once I get the airbox swapped out for A/C airbox I'll be ready to drop the motor in. I also gotta get the TBI harness swapped out. Learned yesterday that the old tbi caught on fire in this truck so there's a couple connectors that were on the throttle body that got burned up. No worries though I have another harness

06-28-2010, 11:22 PM	#577
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Cool man! I guess you know the firewalls are different between A/C and non A/C cabs. I ran into the PO's hack job on this truck so I cut out the airbox area from my donor 'burb. Also the drivers side upper kick panel has a hole for the fresh air vent that you will need to cover.... __________________ *CHEVY ONLY*

06-28-2010, 11:40 PM	#578
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Yeah thanks for the info. I have some of the stuff left over from my dads trick that I'm gonna use. I think I'm gonna just hack my firewall unless I can find a ac firewall section I can get quickly. Also I have the whole ac system inside and out for it. If for some reason I keep it I'll have to have ac in there for my wife to drive it. Period lol

06-28-2010, 11:45 PM	#579
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Yeah, a/c was a must for is too __________________ *CHEVY ONLY*

07-05-2010, 12:37 AM	#582
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Happy 4th man! Did u blow anything up or work on the crew any?

07-05-2010, 12:42 AM	#584
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Heck yeah!! Good luck, again.. __________________ Scott 93 crew cab build Project 62

07-05-2010, 01:20 AM	#585
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" thanks!! Oh and this time the truck isn't involved..... __________________ *CHEVY ONLY*

07-05-2010, 11:22 AM	#586
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Well even better! __________________ Scott 93 crew cab build Project 62

07-05-2010, 11:28 AM	#587
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" What wheels are you getting Joe?

07-05-2010, 12:11 PM	#589
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" __________________ Scott 93 crew cab build Project 62

07-05-2010, 12:14 PM	#590
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Those will look nice Joe. __________________ Just hopin' I live long enough to finish something!!!

07-05-2010, 12:25 PM	#591
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" NICE Are you going to have those on by next weekend? I would love to see a set in person.

07-05-2010, 02:10 PM	#592
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Scott, thanks those are exactly the wheels I'm getting, looks like the same size too Thanks Tim! Brandon, I'm getting them Saturday Dunno if I'll have them on by Sunday... __________________ *CHEVY ONLY* Last edited by joe231; 07-05-2010 at 08:11 PM.

07-05-2010, 03:02 PM	#594
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" You know you will have them on 10min after you get them on saturday.

07-05-2010, 05:06 PM	#596
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Grinding? Spacers? How much more would wheels cost that fit?



Register or Log In To remove these advertisements.

07-05-2010, 05:07 PM	#597
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" LOTS!!! I'm swapping a 88-98 rear end into the crew in the next couple weeks.....spacers would be temporary __________________ *CHEVY ONLY*

07-05-2010, 05:14 PM	#598
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" Glad to hear you nailed down some wheels! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-05-2010, 05:38 PM	#600
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My Crew Cab Short Bed Project, AKA "Project Destiny" 12hour road trip??? You know there are guys in big brown trucks that deliver wheels to your door.

Register or Log In To remove these advertisements.