My 52 GMC Build - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lower50's · 01-19-2016, 08:52 AM

Quote:

Originally Posted by iowaboynca

Nice milestone checked off right there.

Yes it is. Lots of parts I know are GTG.

Quote:

Originally Posted by Advanced Design

It lives again! Sounds good Lower.

Thanks AD. Nice to hear it run again.

Quote:

Originally Posted by Dieselwrencher

It looks and sounds great!

Thanks Diesel. It sounds a little different now that the exhaust is wrapped and intake pipe is on now. In a good way.

Quote:

Originally Posted by RockinKees

Sounds good!!
Must feel great to have it running!!
Congratz!

Thanks I'm really looking forward to driving it this spring when the snow is gone.

FarmerSid · 01-19-2016, 09:19 AM

Nice. That video is cool.

65sub · 01-19-2016, 11:34 AM

Your truck is sounding sweet. i'll bet you're hoping for an early spring.

**JJorgensen52** · 01-19-2016, 12:54 PM

Sounds good! Is that bracket under the exhaust part of your scraper, or is it the running board bracket?

**joedoh** · 01-19-2016, 01:17 PM

its alive!

lower50's · 01-19-2016, 01:55 PM

Quote:

Originally Posted by FarmerSid

Nice. That video is cool.

Thanks Sid there will be some longer vids when it gets on the rd.

Quote:

Originally Posted by 65sub

Your truck is sounding sweet. i'll bet you're hoping for an early spring.

Ya like 2 months would be good

Quote:

Originally Posted by JJorgensen52

Sounds good! Is that bracket under the exhaust part of your scraper, or is it the running board bracket?

Bit of both. The running board checker plate bolts onto it and exhaust is resting on that. Scraper part is directly under frame same structure. Pic might help.
Name: IMG_9213.jpg
Views: 1065
Size: 61.2 KB

Name: IMG_9213.jpg
Views: 1065
Size: 61.2 KB

Quote:

Originally Posted by joedoh

its alive!

Yes Yes it is. Now gauges and lights, sounds easy.

Chance48 · 01-19-2016, 03:59 PM

Pure awesomeness right there lowers!!

lower50's · 01-20-2016, 09:44 AM

Thanks Chance
Last night got some more done. Got the 7 pin trailer plug wired and installed. Also got my reverse lights wired and installed. Then the amount of beer that I was drinking told me I should stop before I F something up. But I did hot wire the reverse lights to see them on. They are very white but have a yellow halo. The last pick shows my water proof electrical box for the wiring at the back.
Name: IMG_0222.jpg
Views: 1090
Size: 51.5 KB

Name: IMG_0222.jpg
Views: 1090
Size: 51.5 KB

Name: IMG_0223.jpg
Views: 1096
Size: 29.9 KB

Name: IMG_0226.jpg
Views: 1094
Size: 53.0 KB

lower50's · 01-20-2016, 11:42 AM

My friend Joe just sent me the invoice for when we painted my '52 where he works.
WOW THANK YOU Joe for all your help.

Name: GMC invoice.jpg
Views: 1029
Size: 28.3 KB

Coach529 · 01-20-2016, 12:24 PM

Quote:

Originally Posted by lower50's

Thanks Chance
Last night got some more done. Got the 7 pin trailer plug wired and installed. Also got my reverse lights wired and installed. Then the amount of beer that I was drinking told me I should stop before I F something up. But I did hot wire the reverse lights to see them on. They are very white but have a yellow halo. The last pick shows my water proof electrical box for the wiring at the back.
Attachment 1489892

Attachment 1489893

Attachment 1489894

That is a nice clean install with the box and the cord grips.....

lower50's · 01-22-2016, 08:34 AM

Thanks Coach

I ran some wire and installed my box tube end lights. They are LED dual element (run, brake) really bright D.O.T. approved. I will have them wired in the same as my tail lights.
Name: IMG_0249.jpg
Views: 1028
Size: 42.6 KB

Name: IMG_0249.jpg
Views: 1028
Size: 42.6 KB

**chevy_man5** · 01-22-2016, 10:57 AM

My son and I have been following your build for a while. We both think you are doing an amazing job!

Do you have a part number and or manufacturer on the lights you put in the end of the bed rail? I've seen them before, but was worried that they would be too dim. And possibly the ones for the the reverse lights also.

Thanks, and keep up the great work!!

Coach529 · 01-22-2016, 11:01 AM

Quote:

Originally Posted by lower50's

Thanks Coach

I ran some wire and installed my box tube end lights. They are LED dual element (run, brake) really bright D.O.T. approved. I will have them wired in the same as my tail lights.
Attachment 1490484

That is awesome. What is your source for the LED's?

lower50's · 01-22-2016, 12:39 PM

Quote:

Originally Posted by chevy_man5

My son and I have been following your build for a while. We both think you are doing an amazing job!

Do you have a part number and or manufacturer on the lights you put in the end of the bed rail? I've seen them before, but was worried that they would be too dim. And possibly the ones for the the reverse lights also.

Thanks, and keep up the great work!!

Thanks Chevy_man5 and Son. Bought them on ebay listings are below. I just welded a washer on the end with the right size hole for lights. You will not be disappointed with how bright they both are.

Quote:

Originally Posted by Coach529

That is awesome. What is your source for the LED's?

Thanks Coach This weekend I get a pick of the red lights on.

Red bed lights
http://www.ebay.ca/itm/2-Custom-Mini...52b19b5&_uhb=1
White reverse lights
http://www.ebay.ca/itm/111429850236?...%3AMEBIDX%3AIT

FarmerSid · 01-22-2016, 12:44 PM

Hey Lower. Could I get info on who you had make your rad?

lower50's · 01-22-2016, 12:50 PM

Quote:

Originally Posted by FarmerSid

Hey Lower. Could I get info on who you had make your rad?

Redi rad Waterloo Ont.
Bob

Coach529 · 01-22-2016, 12:54 PM

Thanks for the links. Those have the resister built right in making wiring easy.

I found the link below for another cool source of LED's.

http://www.oznium.com/

FarmerSid · 01-22-2016, 01:09 PM

Thanks Bob. Nice touch with the LED's

RockinKees · 01-22-2016, 04:11 PM

Nice LEDs!
I might steal those back up lights from you....

Thanks!

lower50's · 01-25-2016, 12:29 AM

No Problem guys.
On the weekend I took the fam out for a walk in the local wrecking yard. My GF likes going and my 2 boys had a blast. I think they went in every car there. Got a wiper motor from the tailgate of a '97 blazer and a vent from a mazda 3. I am using the vent for my heater.
Name: IMG_0269.jpg
Views: 888
Size: 66.1 KB

Name: IMG_0269.jpg
Views: 888
Size: 66.1 KB

Name: IMG_0270.jpg
Views: 888
Size: 45.6 KB

**joedoh** · 01-25-2016, 12:54 AM

I want to see this blazer wiper motor work, I have heard of it before. those mazda vents are good looking and shut all the way, I had a speed 3

99 to Life · 01-25-2016, 01:00 AM

I used a similar motor, only out of a ford. 48panel made me an adjustable linkage for it. Its a bit of fiddling with but if you got the time can be better than dropping 250 for a kit.

**chevy_man5** · 01-25-2016, 01:04 PM

Thanks!!

Quote:

Originally Posted by lower50's

Thanks Chevy_man5 and Son. Bought them on ebay listings are below. I just welded a washer on the end with the right size hole for lights. You will not be disappointed with how bright they both are.

Thanks Coach This weekend I get a pick of the red lights on.

Red bed lights
http://www.ebay.ca/itm/2-Custom-Mini...52b19b5&_uhb=1
White reverse lights
http://www.ebay.ca/itm/111429850236?...%3AMEBIDX%3AIT

lower50's · 01-26-2016, 12:34 AM

Tonight I made some stainless steel brackets to mount my LED tail lights. I used a 3/8" stainless street elbow to direct the wire down. I got the wires ran and hot wired them on.
Name: IMG_0278.jpg
Views: 842
Size: 40.9 KB

Name: IMG_0278.jpg
Views: 842
Size: 40.9 KB

Name: IMG_0286.jpg
Views: 844
Size: 47.8 KB

Name: IMG_0287.jpg
Views: 852
Size: 41.2 KB

Name: IMG_0289.jpg
Views: 843
Size: 59.8 KB

Name: IMG_0290.jpg
Views: 789
Size: 57.3 KB

**Dieselwrencher** · 01-26-2016, 12:58 AM

More great work! The lights are looking great!

01-19-2016, 09:19 AM	#577
FarmerSid Registered User Join Date: Jan 2012 Location: Eastern Ontario, Canada Posts: 1,041	Re: My 52 GMC Build Nice. That video is cool. __________________ 1952 Canadian Chevy 1300 C4 IFS & D44 IRS 5.3 HO L33 My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938

01-19-2016, 11:34 AM	#578
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: My 52 GMC Build Your truck is sounding sweet. i'll bet you're hoping for an early spring. __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167

01-19-2016, 12:54 PM	#579
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: My 52 GMC Build Sounds good! Is that bracket under the exhaust part of your scraper, or is it the running board bracket? __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

01-19-2016, 01:17 PM	#580
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: My 52 GMC Build its alive! __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

01-19-2016, 03:59 PM	#582
Chance48 Registered User Join Date: Oct 2015 Location: Vinton, la Posts: 189	Re: My 52 GMC Build Pure awesomeness right there lowers!! __________________ SHAKE N BAKE BABY, SHAKE N BAKE.... http://67-72chevytrucks.com/vboard/s...d.php?t=686729

01-20-2016, 09:44 AM	#583
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Thanks Chance Last night got some more done. Got the 7 pin trailer plug wired and installed. Also got my reverse lights wired and installed. Then the amount of beer that I was drinking told me I should stop before I F something up. But I did hot wire the reverse lights to see them on. They are very white but have a yellow halo. The last pick shows my water proof electrical box for the wiring at the back. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-20-2016, 11:42 AM	#584
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build My friend Joe just sent me the invoice for when we painted my '52 where he works. WOW THANK YOU Joe for all your help. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-22-2016, 08:34 AM	#586
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Thanks Coach I ran some wire and installed my box tube end lights. They are LED dual element (run, brake) really bright D.O.T. approved. I will have them wired in the same as my tail lights. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-22-2016, 10:57 AM	#587
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: My 52 GMC Build My son and I have been following your build for a while. We both think you are doing an amazing job! Do you have a part number and or manufacturer on the lights you put in the end of the bed rail? I've seen them before, but was worried that they would be too dim. And possibly the ones for the the reverse lights also. Thanks, and keep up the great work!! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-22-2016, 12:44 PM	#590
FarmerSid Registered User Join Date: Jan 2012 Location: Eastern Ontario, Canada Posts: 1,041	Re: My 52 GMC Build Hey Lower. Could I get info on who you had make your rad? __________________ 1952 Canadian Chevy 1300 C4 IFS & D44 IRS 5.3 HO L33 My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938

01-22-2016, 12:54 PM	#592
Coach529 Registered User Join Date: Nov 2012 Location: Post Falls, Idaho Posts: 1,757	Re: My 52 GMC Build Thanks for the links. Those have the resister built right in making wiring easy. I found the link below for another cool source of LED's. http://www.oznium.com/ __________________ 1949 Chevy 3600 "Adventures of Henry" http://smu.gs/QOlhWY

01-22-2016, 01:09 PM	#593
FarmerSid Registered User Join Date: Jan 2012 Location: Eastern Ontario, Canada Posts: 1,041	Re: My 52 GMC Build Thanks Bob. Nice touch with the LED's __________________ 1952 Canadian Chevy 1300 C4 IFS & D44 IRS 5.3 HO L33 My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938

01-22-2016, 04:11 PM	#594
RockinKees Registered User Join Date: Dec 2013 Location: Purmerend, Netherlands Posts: 1,657	Re: My 52 GMC Build Nice LEDs! I might steal those back up lights from you.... Thanks! __________________ Cheers!! Kees. 1959 Chevy Fleetside Longbed My build: http://67-72chevytrucks.com/vboard/s...d.php?t=643426 Kool Guyz CC Instagram: _King_Kustom_

01-25-2016, 12:29 AM	#595
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build No Problem guys. On the weekend I took the fam out for a walk in the local wrecking yard. My GF likes going and my 2 boys had a blast. I think they went in every car there. Got a wiper motor from the tailgate of a '97 blazer and a vent from a mazda 3. I am using the vent for my heater. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-25-2016, 12:54 AM	#596
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: My 52 GMC Build I want to see this blazer wiper motor work, I have heard of it before. those mazda vents are good looking and shut all the way, I had a speed 3 __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393



Register or Log In To remove these advertisements.

01-25-2016, 01:00 AM	#597
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 52 GMC Build I used a similar motor, only out of a ford. 48panel made me an adjustable linkage for it. Its a bit of fiddling with but if you got the time can be better than dropping 250 for a kit. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

01-26-2016, 12:34 AM	#599
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Tonight I made some stainless steel brackets to mount my LED tail lights. I used a 3/8" stainless street elbow to direct the wire down. I got the wires ran and hot wired them on. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-26-2016, 12:58 AM	#600
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: My 52 GMC Build More great work! The lights are looking great! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.