My 56 build

[Jason 56]

Originally Posted by 57FleetsideC4

So on your bed wood did you use an oil based stain then automotive urethane clear?

No oil, I’m actually using dye and mixing my own stain. All from Amazon. To get the color change effect I’m first using blue mixed in water. That gets soaked into the wood. I apply it with a large oral syringe and spread it around with rubber gloves. After that dries I apply a quick coat of brown that’s mixed In lacquer thinner. It’s applied with a rag. The quick drying lacquer thinner keeps the stain on the surface. Dries, then sanded with 400 until I get the look I like. Then 2 coats of automotive urethane. Let dry overnight. Sand smooth and apply 2 more coats. I experimented last winter and perfected the process.

[57FleetsideC4]

Originally Posted by Jason 56

No oil, I’m actually using dye and mixing my own stain. All from Amazon. To get the color change effect I’m first using blue mixed in water. That gets soaked into the wood. I apply it with a large oral syringe and spread it around with rubber gloves. After that dries I apply a quick coat of brown that’s mixed In lacquer thinner. It’s applied with a rag. The quick drying lacquer thinner keeps the stain on the surface. Dries, then sanded with 400 until I get the look I like. Then 2 coats of automotive urethane. Let dry overnight. Sand smooth and apply 2 more coats. I experimented last winter and perfected the process.

Thank You, I used some minwax stain so will see what happens when I clear it. I am trying to keep this project on the simple side plus I am not experienced with this. Thank you for the rundown on what you did. Steve

[Jason 56]

Last of the painting is done! Wheels look good

[Jason 56]

As of today I’m officially done with spraying paint. I put the last of my raptor bed liner on. So I’m ready for cold weather. Now the assembly begins. I’m looking forward to that process.

[57FleetsideC4]

Looking Great!! I am right behind you on my build. Doing the same thing with the raptor liner. Enjoy the rest of the build...The dirty work is over. Steve

[Jason 56]

Originally Posted by 57FleetsideC4

Looking Great!! I am right behind you on my build. Doing the same thing with the raptor liner. Enjoy the rest of the build...The dirty work is over. Steve

I’ve been following. You’re making good progress. It’s tough painting in the garage this far north. I only have about 5 months a year

[Jason 56]

After taking a couple months off I’m back at it. Not much to show. Just color sanding as I assemble. I put the drivetrain back in. I’m not going to tear into the engine and change the lifters. At this point I just want to get it together! The box is together and I finished the inside of the cab yesterday. Here’s a few pictures.

[57FleetsideC4]

Originally Posted by Jason 56

After taking a couple months off I’m back at it. Not much to show. Just color sanding as I assemble. I put the drivetrain back in. I’m not going to tear into the engine and change the lifters. At this point I just want to get it together! The box is together and I finished the inside of the cab yesterday. Here’s a few pictures.

Looks Great. Making great progress. Steve

[Jason 56]

Some progress to report. Front fender are cut, buffed and installed. Interior is also cut, buffed and the steering column is in. Just finished some sound deadening yesterday. Today I’m looking forward to assembling. No sanding or polishing today. It’s looking good, but I’m sick of sanding!

[dsraven]

looks really good. curious, what is thatbig box above the drivers front wheel, does it have clearance for the tire to go through a full suspension travel with the wheels turned to the right? looks tight in the pics but then pics can do that.
I like the color combo, looks rich.

[57FleetsideC4]

looks very nice!! Making great progress. Steve

[Tempest67]

that is a beauty, keep at it

[Jason 56]

Originally Posted by dsraven

looks really good. curious, what is thatbig box above the drivers front wheel, does it have clearance for the tire to go through a full suspension travel with the wheels turned to the right? looks tight in the pics but then pics can do that.
I like the color combo, looks rich.

It’s where all the engine electronics are housed. The fuse panel bolts to the inside of the cover. All you see is the wire loom entering the fender. There’s about 8” of clearance. So no problem with the static suspension.

[dsraven]

great idea on the electrical box, thanks for the pics.
HAPPY NEW YEAR!

[dsraven]

is your fuse/relay panel in there too? good access to work on it if required?

[8man]

I just went through your build, and it is awesome. Some real thought and skill went into it. Glad I found it.

[8man]

Did you use the Specialty Power Windows kit? If not, which one did you use and is it working well for you?

Also, I've seen a couple of one piece window kits that have the glass with them, what kit did you use for the one piece and did a local glass company cut the window?

Thanks.

[Kevin_C]

its really coming together. Color looks great

[6DoF]

good lord, those colors look even better as it's going together

[Jason 56]

Originally Posted by 8man

Did you use the Specialty Power Windows kit? If not, which one did you use and is it working well for you?

Also, I've seen a couple of one piece window kits that have the glass with them, what kit did you use for the one piece and did a local glass company cut the window?

Thanks.

Yes they are Specialty Power Windows. Kit is from classic parts. I got my side window glass and seals from Vintage Glass: Balls Rod and Kustom.

[Jason 56]

Originally Posted by dsraven

is your fuse/relay panel in there too? good access to work on it if required?

Yes, it’s in there too. There’s a cover to the box. The panel bolts to the inside of the cover. So the panel can be pulled out. You can see the 4 screw heads in the picture. It’s snug, but well ventilated.

[Jason 56]

Funny story… I was reading another post on the forum. It was mentioned to make sure your windshield fits if you are replacing the upper eyebrow area over the window. That was about a month ago. So I’ve been sweating a little. I’m nearly ready to install my new windshield in its new hole that hasn’t been fitted. After some thought I decided to install the old seal on the windshield and cut both the inner and outer lip seals off. Just left me with the windshield as it should sit without the rubber pulling on it. With much relief everything fit. soon to be installed permanently!

[Jason 56]

Otherwise I’ve been wiring for about 2 weeks now. Getting cliose to finishing that. Airbox is also installed.

[my56chevytruck]

Originally Posted by Jason 56

Otherwise I’ve been wiring for about 2 weeks now. Getting cliose to finishing that. Airbox is also installed.

great job Jason, all your pics show great work, detail and perfection. Again, great job.

[Jason 56]

Radiator and fan are installed. Finished the a/c system. Dryer is installed and it’s ready for a charge.