67 cheby's Dropmember build thread (CLOUD 9) - Page 241 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 09-22-2012, 09:34 AM

Ok so i wanted a "CLEAR" windshield with no upper tint on it , i searched everywhere i found one for $500...and kept searching, finally found one for $169 at Classic Parts in KC my grandfather made the 8 hour round trip to get the front and back glasses. Next dilema was the gaskets i had brand new gaskets but they werent Precision and everyone said use Precision so i called them and was placing my order and got to talking to them on the phone and the sponsored the front and back windshield rubbers (thank you Precision) My factory stainless trim was very nice just needed polished something terrible Jason Matthews repolished them for me , they look beautiful, there are a couple tiny dings left in them ....but they are the original ones ! So next task, me and my grandfather install the back glass, took 2 trys but not to bad ! That brings us to the windshield, with all the horror stories you hear i was scared to death ! In talking to Derrick at Precision he says to check out their installation video on Youtube...so i watched it , still couldnt make up my mind if i was brave enough to try it or not so i call the local glass company, they wont install it because i didnt buy it from them so i call they other local one they will for $150.....WOW, so last night i watch the install video again and follow it step by step exactly ...took me and my wife 45 mins start to finish went in perfectly !! THANK YOU PRECISION !

chapster · 09-22-2012, 09:58 AM

nice job on the window installs...This thing is looking great.

XxCHEVYMANxX · 09-22-2012, 10:05 AM

Nice job Mike ! looks great !

LODI3QTR · 09-22-2012, 11:04 PM

Quote:

Originally Posted by 67cheby

THANK YOU PRECISION !

What is there web site location for the windshield install video? Thanks..........

**Precision Parts** · 10-05-2012, 10:45 AM

Quote:

Originally Posted by 67cheby

Ok so i wanted a "CLEAR" windshield with no upper tint on it , i searched everywhere i found one for $500...and kept searching, finally found one for $169 at Classic Parts in KC my grandfather made the 8 hour round trip to get the front and back glasses. Next dilema was the gaskets i had brand new gaskets but they werent Precision and everyone said use Precision so i called them and was placing my order and got to talking to them on the phone and the sponsored the front and back windshield rubbers (thank you Precision) My factory stainless trim was very nice just needed polished something terrible Jason Matthews repolished them for me , they look beautiful, there are a couple tiny dings left in them ....but they are the original ones ! So next task, me and my grandfather install the back glass, took 2 trys but not to bad ! That brings us to the windshield, with all the horror stories you hear i was scared to death ! In talking to Derrick at Precision he says to check out their installation video on Youtube...so i watched it , still couldnt make up my mind if i was brave enough to try it or not so i call the local glass company, they wont install it because i didnt buy it from them so i call they other local one they will for $150.....WOW, so last night i watch the install video again and follow it step by step exactly ...took me and my wife 45 mins start to finish went in perfectly !! THANK YOU PRECISION !

Hey Mike,

I've been in Europe few a couple of weeks and just got back, wanted to catch up with this thread.

The truck is looking sooo sharp! Glad to be part of this build. Looks like the installs went well and glad the video helped.

My R & D guy in the video & myself will be at Sema shooting video, taking pictures etc for our blog and youtube channel. I would like to do a short interview with you talking about the concept and build of this truck. Would that be ok?

Derek

**67cheby** · 10-05-2012, 10:55 AM

Quote:

Originally Posted by Precision Parts

Hey Mike,

I've been in Europe few a couple of weeks and just got back, wanted to catch up with this thread.

The truck is looking sooo sharp! Glad to be part of this build. Looks like the installs went well and glad the video helped.

My R & D guy in the video & myself will be at Sema shooting video, taking pictures etc for our blog and youtube channel. I would like to do a short interview with you talking about the concept and build of this truck. Would that be ok?

Derek

Are you kidding...LOL, of course it would be OK !! Thank you !

gringoloco · 09-22-2012, 11:09 AM

Looking good! What color is the Tubz logo? I think an 'etched glass look' decal would look good- standout, but still be able to see through and not look so much like a sticker...
Posted via Mobile Device

watahyahknow · 09-22-2012, 11:29 AM

Quote:

Originally Posted by gringoloco

Looking good! What color is the Tubz logo? I think an 'etched glass look' decal would look good- standout, but still be able to see through and not look so much like a sticker...
Posted via Mobile Device

i was just about to say the same thing , he could allso have it etched in for real , but then again if you ever decide to update the logo youre stuck with the one on the window if it would be etched

for rearvisibility you could have it made about a thirth of the size and put it in the uppercorner of the window

**67cheby** · 09-22-2012, 12:04 PM

Quote:

Originally Posted by gringoloco

Looking good! What color is the Tubz logo? I think an 'etched glass look' decal would look good- standout, but still be able to see through and not look so much like a sticker...
Posted via Mobile Device

it is a reflective silver , it will look similar to the etch but give a little sparkle when the light hits it !

STOCKISH · 09-22-2012, 02:07 PM

Logo looks great. I really like the clear glass without the tint, looks really clean IMO. You're going to have a sick truck when its all said and done with!

kvn1011 · 09-22-2012, 06:58 PM

Awesome!! Looks good to me!!
Posted via Mobile Device

**FRENCHBLUE72** · 09-22-2012, 07:51 PM

Truck is really gettin it.....

gringoloco · 09-22-2012, 08:00 PM

Nice job on the window install, btw. My wife helped with mine, too. It's a little scary if you've never done one, but the sense of satisfaction is enormous when complete
Posted via Mobile Device

CC69Rat · 09-22-2012, 08:52 PM

Looking great Mike, keep at it..
Posted via Mobile Device

**fakerwade** · 09-23-2012, 04:04 AM

Quote:

Originally Posted by kvn1011

Awesome!! Looks good to me!!
Posted via Mobile Device

Quote:

Originally Posted by CC69Rat

Looking great Mike, keep at it..
Posted via Mobile Device

.

,,,,

**Bowtie468** · 09-23-2012, 11:11 AM

Precision 67-72 windshield install

1967-1972 Chevy Truck Windshield Install - YouTube

Wow that looks great , Mike ! Love the look it gives without the upper tint .
Posted via Mobile Device

LODI3QTR · 09-23-2012, 12:07 PM

Quote:

Precision 67-72 windshield install

Very good. Thanks....

Fattback · 09-23-2012, 12:38 PM

Looks great Mike

Thanks Bowtie for posting the YouTube of the installation.

Rob

**67cheby** · 09-23-2012, 10:09 PM

Thanks Bowtie , follow that video exactly and you can do it ! It felt pretty good to get it put in just me and the wife ! Precision Rocks !
Posted via Mobile Device

VA72C10 · 09-23-2012, 11:57 PM

Looks great! Nice work on the install of the glass. It was easier than I thought too, but I had bmerdoc's help and he had just done his.....honestly with fresh, glosst paint it would have slipped into place easier with the foaming window cleaner....with my pating/rough frame it took a bit but in the end it looks great!
Posted via Mobile Device

67c10rustbuket · 09-24-2012, 12:15 AM

Windows look great. I watched the vid too very nice how to from precision. I really like the front glass without the tint strip it looks very clean in a truck with show quality interior. Might need some tint in my rag-a-muffin truck

71Sleeper · 09-24-2012, 06:31 AM

Looks great! Can't wait for the finished product. Keep rollin....

Bennett68C10 · 09-24-2012, 08:15 AM

Great Job on the Glass install. Great progress so far, you'll be done in no time.

**67cheby** · 09-24-2012, 09:53 AM

I have a ton of pics to post i will start with some door pics me an my grandfather started hanging them.....then had to call in Gary Angel of Street Driven Customs for the final fitment...

VA72C10 · 09-24-2012, 09:56 AM

Beautiful attention to detail on the hinges and sweet chrome latch!
Posted via Mobile Device

09-22-2012, 09:34 AM	#1
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Ok so i wanted a "CLEAR" windshield with no upper tint on it , i searched everywhere i found one for $500...and kept searching, finally found one for $169 at Classic Parts in KC my grandfather made the 8 hour round trip to get the front and back glasses. Next dilema was the gaskets i had brand new gaskets but they werent Precision and everyone said use Precision so i called them and was placing my order and got to talking to them on the phone and the sponsored the front and back windshield rubbers (thank you Precision) My factory stainless trim was very nice just needed polished something terrible Jason Matthews repolished them for me , they look beautiful, there are a couple tiny dings left in them ....but they are the original ones ! So next task, me and my grandfather install the back glass, took 2 trys but not to bad ! That brings us to the windshield, with all the horror stories you hear i was scared to death ! In talking to Derrick at Precision he says to check out their installation video on Youtube...so i watched it , still couldnt make up my mind if i was brave enough to try it or not so i call the local glass company, they wont install it because i didnt buy it from them so i call they other local one they will for $150.....WOW, so last night i watch the install video again and follow it step by step exactly ...took me and my wife 45 mins start to finish went in perfectly !! THANK YOU PRECISION ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-22-2012, 09:58 AM	#2
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: 67 cheby's Dropmember build thread (CLOUD 9) nice job on the window installs...This thing is looking great. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

09-22-2012, 10:05 AM	#3
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 67 cheby's Dropmember build thread (CLOUD 9) Nice job Mike ! looks great ! __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

09-22-2012, 11:09 AM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looking good! What color is the Tubz logo? I think an 'etched glass look' decal would look good- standout, but still be able to see through and not look so much like a sticker... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-22-2012, 02:07 PM	#10
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 67 cheby's Dropmember build thread (CLOUD 9) Logo looks great. I really like the clear glass without the tint, looks really clean IMO. You're going to have a sick truck when its all said and done with! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-22-2012, 06:58 PM	#11
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: 67 cheby's Dropmember build thread (CLOUD 9) Awesome!! Looks good to me!! Posted via Mobile Device __________________ My Build Thead (Project Slow Motion)

09-22-2012, 07:51 PM	#12
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: 67 cheby's Dropmember build thread (CLOUD 9) Truck is really gettin it..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-22-2012, 08:00 PM	#13
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 67 cheby's Dropmember build thread (CLOUD 9) Nice job on the window install, btw. My wife helped with mine, too. It's a little scary if you've never done one, but the sense of satisfaction is enormous when complete Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-22-2012, 08:52 PM	#14
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,208	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looking great Mike, keep at it.. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

09-23-2012, 12:38 PM	#18
Fattback Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 287	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looks great Mike Thanks Bowtie for posting the YouTube of the installation. Rob

09-23-2012, 10:09 PM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Thanks Bowtie , follow that video exactly and you can do it ! It felt pretty good to get it put in just me and the wife ! Precision Rocks ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-23-2012, 11:57 PM	#20
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looks great! Nice work on the install of the glass. It was easier than I thought too, but I had bmerdoc's help and he had just done his.....honestly with fresh, glosst paint it would have slipped into place easier with the foaming window cleaner....with my pating/rough frame it took a bit but in the end it looks great! Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-24-2012, 12:15 AM	#21
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: 67 cheby's Dropmember build thread (CLOUD 9) Windows look great. I watched the vid too very nice how to from precision. I really like the front glass without the tint strip it looks very clean in a truck with show quality interior. Might need some tint in my rag-a-muffin truck __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

09-24-2012, 06:31 AM	#22
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looks great! Can't wait for the finished product. Keep rollin.... __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

09-24-2012, 08:15 AM	#23
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 67 cheby's Dropmember build thread (CLOUD 9) Great Job on the Glass install. Great progress so far, you'll be done in no time. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

09-24-2012, 09:53 AM	#24
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) I have a ton of pics to post i will start with some door pics me an my grandfather started hanging them.....then had to call in Gary Angel of Street Driven Customs for the final fitment... Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-24-2012, 09:56 AM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67 cheby's Dropmember build thread (CLOUD 9) Beautiful attention to detail on the hinges and sweet chrome latch! Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.