What did you do to your truck today! - Page 242 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shopking72 · 02-15-2013, 09:15 PM

Got a lot done today! Pulled the old 350 out. Pulling the 700R4 as well. Going with a built 406 and TH400 combo

Spilled anti freeze right before I took this pic lol.

lolo33 · 02-16-2013, 02:23 PM

made a box for speakers under the seat.
2X200W with 2 separate channels. tweeters will be put rear in the cab, right and left of the bench.

Trsmotrhed · 02-16-2013, 02:56 PM

Quote:

Originally Posted by BugzC10

Installed CPP 2.5" drop spindles.

Posted via Mobile Device

Posted via Mobile Device
Posted via Mobile Device

I ordered the same drop spindle from CPP this week. They're about a week behind after moving. Hoping to have them for next weekend. Looks awesome. How did they ? Any issues I should be aware of? Thanks.
Posted via Mobile Device

54belair · 02-16-2013, 05:20 PM

I actually have managed to get a lot done this winter----which only leaves about 9 years and three weeks of work left!!!

The latest (and last TO DO) to the cab before primer is the recessed antenna.

Removed the inside tank, used the purchased filler plate, then cut it out to use 2 1/4 heavy wall exhaust pipe. Will use a power antenna sitting about 2" down. Installed a drain in the bottom and will run that out the bottom of cab.

Mr.Hyde · 02-16-2013, 06:01 PM

More patchwork on the outer fenders. Still have the tailgate to go before I'm at a stand still till I get my cab and bed. Trying to get the small panels out of the way so I can focus on the pile o rust cab
Posted via Mobile Device

oneoff · 02-16-2013, 06:05 PM

The cab and most all of the truck is in the booth ready to be sprayed. I'll put some more up next week.
Name: 20130212_105701 (1).jpg
Views: 550
Size: 32.8 KB

Bloodyjaws88 · 02-16-2013, 06:44 PM

After figuring out the new starter I put on 2 weeks ago blew all its teeth into the inspection. pan I installed another today. I also found a blown fuse and I now have.tail-brake lights. I also insured it and took the little woman to town to fill the tank for the fisrt time since I've owned it. Tomorrow I get to drive her to work. I'm so excited. There is a guy down the street with a 71-72 surburban that I meet today at the gas station. I know I haven't gotten a lot done, but I'm happy. Next is to get a fresh tune and adjust the tranny.
Chris
Posted via Mobile Device

THE BOSS · 02-16-2013, 07:17 PM

today i worked on the killer rock and roll system and the right outside door handle, then spent money on parts.

i cant wait for the stereo to get fired up!!

UPS dot com says some parts are half way here, some are in for Monday delivery and some more ordered today.

Mr Chevorlet · 02-16-2013, 09:09 PM

Put my new door handles and key locks on

ryanroo · 02-16-2013, 09:37 PM

Thats a sharp looking truck!

Mr Chevorlet · 02-16-2013, 09:51 PM

Thanks it was my dads. I have been working on for two years and I am getting tired but I keep chugging along.

BugzC10 · 02-16-2013, 09:58 PM

Quote:

Originally Posted by Trsmotrhed

I ordered the same drop spindle from CPP this week. They're about a week behind after moving. Hoping to have them for next weekend. Looks awesome. How did they ? Any issues I should be aware of? Thanks.
Posted via Mobile Device

The install went without a hitch. All the stock parts fit perfectly. Highly recommend them.
Posted via Mobile Device
Posted via Mobile Device

glider_6969 · 02-16-2013, 10:22 PM

Today I got most of the bottom end of the new power plant assembled, If I could get my other

computer to hook up to our internet I would show you guys some updated pics of the engine build progress and some of the internals.

shawno72 · 02-16-2013, 10:30 PM

Installed a 700r4 earlier this week

Name: trans 2.jpg
Views: 490
Size: 42.6 KB

71K20chevy · 02-16-2013, 11:57 PM

Wire-wheeled and painted bolts...I really don't have a life

Trsmotrhed · 02-17-2013, 12:16 AM

Quote:

Originally Posted by BugzC10

The install went without a hitch. All the stock parts fit perfectly. Highly recommend them.
Posted via Mobile Device
Posted via Mobile Device

Cool, thanks for the info. I just installed my 4" rear coils today. Waiting on the front spindles and new coils. Also shocks and relocation brackets.
Posted via Mobile Device

sbc10guy · 02-17-2013, 12:28 AM

Finally got my m21 installed. Cant wait to take it out and see how it drives when the salt and snow is gone.

G Man · 02-17-2013, 12:36 AM

still working on welding up the square tubing for the bed. Front mounts for the bed are done. Been a good day

ItsRandy · 02-17-2013, 12:42 AM

Quote:

Originally Posted by shawno72

Installed a 700r4 earlier this week

Attachment 1061545

Attachment 1061546

Attachment 1061547

Attachment 1061548

Attachment 1061549

Nice job on the trans lines. Aren't those little starters the best!

ItsRandy · 02-17-2013, 12:51 AM

Quote:

Originally Posted by lolo33

does someone help me please ?
I've bought a regulator, but there is a condensator and I can't find it on LMC truck's catalog. can you please give me the characteristics of it ?

I think that condenser you are asking about is for radio noise suppression. There may be an additional one on the back of the alternator. I'm not sure what the specifications are for the condenser but if you don't have one I don't believe it will effect the operation of your charging system. You may get interference (static) when listening to the radio.

Because you are in France it must be difficult to get parts when you need them. Can you order from Napa Auto Parts on-line or Rock Auto or a similar on-line auto parts store (not just LMC)?

**mortoyz** · 02-17-2013, 12:55 AM

We installed the new gm crate motor today and fired it up. Gonna put the new skyjacker 4 inch springs on next weekend.
Posted via Mobile Device

Bassman53 · 02-17-2013, 03:37 PM

cleaned and painted headlight benzels black

THE BOSS · 02-17-2013, 07:30 PM

Quote:

Originally Posted by 74baggedbug

Installed some led curtesy lights but now my gauge cluster lights look really bad so time to change those to LEDs also
Posted via Mobile Device

where did you get them kick panel area speaker mounts?

dads longhorn · 02-17-2013, 07:37 PM

Took the cover off and cruised the plaza in 50 degree temps! Spring isn't that far away!

Bishops Trucks · 02-17-2013, 08:18 PM

The guy I sold my Camaro to finally picked it up so I was able to come-a-long my truck into the garage. Now it's time to start working on it and hopefully get it going by mid summer.

02-15-2013, 09:15 PM	#6026
shopking72 Registered User Join Date: Sep 2005 Location: Kansas Posts: 774	Re: What did you do to your truck today! Got a lot done today! Pulled the old 350 out. Pulling the 700R4 as well. Going with a built 406 and TH400 combo Spilled anti freeze right before I took this pic lol. __________________ 1972 C10 LWB- 4.5 Front and 5 Rear Drop, 406/TH350 1966 Caprice 1968 Impala (Frame Off LSX Project) 2001 Tahoe LT 2013 Hyundai Elantra 2010 Kawasaki Z1000

02-16-2013, 02:23 PM	#6027
lolo33 Registered User Join Date: Jun 2012 Location: Givors - FRANCE Posts: 109	Re: What did you do to your truck today! made a box for speakers under the seat. 2X200W with 2 separate channels. tweeters will be put rear in the cab, right and left of the bench. Attached Images __________________ '70 C10 shortbed - 350 Edelbrock equipped - 4/1 headers - 3" flowmaster exausts '07 MUSTANG V8 convertible - CAI Spectre - Brembo's - 3" flowmaster exhausts

02-16-2013, 05:20 PM	#6029
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: What did you do to your truck today! I actually have managed to get a lot done this winter----which only leaves about 9 years and three weeks of work left!!! The latest (and last TO DO) to the cab before primer is the recessed antenna. Removed the inside tank, used the purchased filler plate, then cut it out to use 2 1/4 heavy wall exhaust pipe. Will use a power antenna sitting about 2" down. Installed a drain in the bottom and will run that out the bottom of cab. Attached Images __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

02-16-2013, 06:01 PM	#6030
Mr.Hyde Registered User Join Date: Oct 2012 Location: Winnipeg Posts: 431	Re: What did you do to your truck today! More patchwork on the outer fenders. Still have the tailgate to go before I'm at a stand still till I get my cab and bed. Trying to get the small panels out of the way so I can focus on the pile o rust cab Posted via Mobile Device __________________ 1968 Chevy C10 build - http://67-72chevytrucks.com/vboard/s...d.php?t=546713 Member of tailgate association of manitoba

02-16-2013, 06:05 PM	#6031
oneoff Registered User Join Date: Jun 2011 Location: Parker Colorado Posts: 174	Re: What did you do to your truck today! The cab and most all of the truck is in the booth ready to be sprayed. I'll put some more up next week. __________________ Build: http://67-72chevytrucks.com/vboard/s...d.php?t=541803 Dennis H 1969 Chevy C10, SWB, LS3,6.2L engine 1969 Chevy Chevelle SS,BBC, Convertible

02-16-2013, 06:44 PM	#6032
Bloodyjaws88 Registered User Join Date: Feb 2013 Location: berryville, Ar Posts: 58	Re: What did you do to your truck today! After figuring out the new starter I put on 2 weeks ago blew all its teeth into the inspection. pan I installed another today. I also found a blown fuse and I now have.tail-brake lights. I also insured it and took the little woman to town to fill the tank for the fisrt time since I've owned it. Tomorrow I get to drive her to work. I'm so excited. There is a guy down the street with a 71-72 surburban that I meet today at the gas station. I know I haven't gotten a lot done, but I'm happy. Next is to get a fresh tune and adjust the tranny. Chris Posted via Mobile Device

02-16-2013, 07:17 PM	#6033
THE BOSS Registered User Join Date: Jun 2012 Location: Kalamazoo MI Posts: 104	Re: What did you do to your truck today! today i worked on the killer rock and roll system and the right outside door handle, then spent money on parts. i cant wait for the stereo to get fired up!! UPS dot com says some parts are half way here, some are in for Monday delivery and some more ordered today.

02-16-2013, 09:09 PM	#6034
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Re: What did you do to your truck today! Put my new door handles and key locks on Attached Images __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

02-16-2013, 09:37 PM	#6035
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: What did you do to your truck today! Thats a sharp looking truck! __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

02-16-2013, 09:51 PM	#6036
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Re: What did you do to your truck today! Thanks it was my dads. I have been working on for two years and I am getting tired but I keep chugging along. __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

02-16-2013, 10:22 PM	#6038
glider_6969 Registered User Join Date: Jan 2010 Location: Ontario Posts: 400	Re: What did you do to your truck today! Today I got most of the bottom end of the new power plant assembled, If I could get my other computer to hook up to our internet I would show you guys some updated pics of the engine build progress and some of the internals. __________________ 68 Long stepper My other ride ,,, 07 Streetglide..

02-16-2013, 10:30 PM	#6039
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: What did you do to your truck today! Installed a 700r4 earlier this week __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-16-2013, 11:57 PM	#6040
71K20chevy Registered User Join Date: Jul 2012 Location: Ft Wayne Indiana Posts: 1,204	Re: What did you do to your truck today! Wire-wheeled and painted bolts...I really don't have a life __________________ 71 K20 64 GMC mud truck

02-17-2013, 12:28 AM	#6042
sbc10guy Registered User Join Date: Sep 2011 Location: Eau Claire, Wisconsin Posts: 415	Re: What did you do to your truck today! Finally got my m21 installed. Cant wait to take it out and see how it drives when the salt and snow is gone. __________________ 1969 shortbed c/10 1998 GMC sierra

02-17-2013, 12:36 AM	#6043
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: What did you do to your truck today! still working on welding up the square tubing for the bed. Front mounts for the bed are done. Been a good day



Register or Log In To remove these advertisements.

02-17-2013, 12:55 AM	#6046
mortoyz Active Member Join Date: Nov 2008 Location: Maroa, IL Posts: 123	Re: What did you do to your truck today! We installed the new gm crate motor today and fired it up. Gonna put the new skyjacker 4 inch springs on next weekend. Posted via Mobile Device

02-17-2013, 03:37 PM	#6047
Bassman53 Registered User Join Date: Dec 2012 Location: Bluefield, WV Posts: 36	Re: What did you do to your truck today! cleaned and painted headlight benzels black

02-17-2013, 07:37 PM	#6049
dads longhorn Registered User Join Date: Mar 2010 Location: New mexico Posts: 369	Re: What did you do to your truck today! Took the cover off and cruised the plaza in 50 degree temps! Spring isn't that far away!

02-17-2013, 08:18 PM	#6050
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: What did you do to your truck today! The guy I sold my Camaro to finally picked it up so I was able to come-a-long my truck into the garage. Now it's time to start working on it and hopefully get it going by mid summer. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

Register or Log In To remove these advertisements.